Contact us to receive an offer.
| Manufacturer | MORI SEIKI |
|---|---|
| Model | SH 400 |
| Year | 1999 |
| Location | Germany
|
MORI SEIKI SH 400 horizontal twin-pallet machining center, manufactured in 1999. The machine has X-axis travel of 560 mm, Y-axis travel of 510 mm and Z-axis travel of 510 mm. It is equipped with a 60-pocket tool magazine and has a maximum spindle speed of 12,000 rpm. The listed machine dimensions are 2,900 mm long, 3,900 mm wide and 2,600 mm high.
The current specification describes a full fourth axis, a BT 40 tool system, twin pallets and coolant supplied through the spindle. A chip conveyor is also listed. Inside the enclosed work area, a horizontal spindle and cutting tool are present, along with a circular rotary fixture or table assembly mounted on the machine bed. The exterior is a gray-and-blue enclosed design with front access doors and a separate control panel on the right, fitted with a screen, keypad, buttons and rotary controls.
The exterior panels show scuffs and general signs of use. Residue, scattered chips and wear marks are visible on interior metal surfaces and around the work area. These observations describe visible condition only and do not establish the machine’s operating status. The listed weight is not included because the supplied weight information is inconsistent.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Horizontal twin - pallet machining center with full 4th axis, 60-tool magazine BT 40 and 50 bar coolant through spindle. Technical specifications: x-travel 560 mm, y-travel 510 mm, z-travel 510 mm, control Fanuc 18i M, B-axis fully integrated 360.000 x 0,001°, power capacity - milling spindle 22 / 18,5 kW, spindle turning speed - stepless 12.000 1/min, numbers of tools in magazin 60 BT 40, size of pallet 2x 400 x 400 mm, max. workpiece diameter on pallets 580 mm, workpiece height max. 650 mm, feeds x/y/z -stepless 16.000 mm/min, rapid travel x/y/z 32.000 mm/min, total power requirement 54 kVA, weight of the machine ca. 8,7 t, dimensions of the machine ca. 2,9 x 3,9 x 2,6 m, Chip conveyor, Coolant through Spindle 50 bar Knoll VRF unit.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2020 |
| Offers online | 18 |
| Last activity | Oct. 28, 2026 |
Horizontal twin - pallet machining center with full 4th axis, 60-tool magazine BT 40 and 50 bar coolant through spindle. Technical specifications: x-travel 560 mm, y-travel 510 mm, z-travel 510 mm, control Fanuc 18i M, B-axis fully integrated 360.000 x 0,001°, power capacity - milling spindle 22 / 18,5 kW, spindle turning speed - stepless 12.000 1/min, numbers of tools in magazin 60 BT 40, size of pallet 2x 400 x 400 mm, max. workpiece diameter on pallets 580 mm, workpiece height max. 650 mm, feeds x/y/z -stepless 16.000 mm/min, rapid travel x/y/z 32.000 mm/min, total power requirement 54 kVA, weight of the machine ca. 8,7 t, dimensions of the machine ca. 2,9 x 3,9 x 2,6 m, Chip conveyor, Coolant through Spindle 50 bar Knoll VRF unit.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
MORI SEIKI SH 400 horizontal twin-pallet machining center, manufactured in 1999. The machine has X-axis travel of 560 mm, Y-axis travel of 510 mm and Z-axis travel of 510 mm. It is equipped with a 60-pocket tool magazine and has a maximum spindle speed of 12,000 rpm. The listed machine dimensions are 2,900 mm long, 3,900 mm wide and 2,600 mm high.
The current specification describes a full fourth axis, a BT 40 tool system, twin pallets and coolant supplied through the spindle. A chip conveyor is also listed. Inside the enclosed work area, a horizontal spindle and cutting tool are present, along with a circular rotary fixture or table assembly mounted on the machine bed. The exterior is a gray-and-blue enclosed design with front access doors and a separate control panel on the right, fitted with a screen, keypad, buttons and rotary controls.
The exterior panels show scuffs and general signs of use. Residue, scattered chips and wear marks are visible on interior metal surfaces and around the work area. These observations describe visible condition only and do not establish the machine’s operating status. The listed weight is not included because the supplied weight information is inconsistent.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2020 |
| Offers online | 18 |
| Last activity | Oct. 28, 2026 |
| Axis X | 630 mm |
|---|---|
| Axis Z | 650 mm |
| CNC | MORI SEIKI MSC-502 |
| Table width | 500 mm |
| Number of tool pockets | 40 |
| Max. spindle speed | 12000 rpm |
| Axis Y | 600 mm |
|---|---|
| Rotary table (4th axis) | no |
| Table length | 500 mm |
| Max. part weight | 500 kg |
| Spindle taper | MAS BT-40 |
| Spindle motor power | 2.2 kW |
Switzerland
2011
| Axis X | 560 mm |
|---|---|
| Axis Z | 630 mm |
| CNC | FANUC F31iA |
| Table width | 400 mm |
| Number of tool pockets | 60 |
| Max. spindle speed | 14000 rpm |
| Axis Y | 560 mm |
|---|---|
| Rotary table (4th axis) | yes |
| Table length | 400 mm |
| Max. part weight | 8 kg |
| Spindle taper | BT 40 |
| Spindle motor power | 18 kW |
Austria
2017
| Axis X | 730 mm |
|---|---|
| Axis Z | 880 mm |
| CNC | |
| Table width | 500 mm |
| Number of tool pockets | 40 |
| Max. spindle speed | 15000 rpm |
| Axis Y | 730 mm |
|---|---|
| Rotary table (4th axis) | no |
| Table length | 500 mm |
| Max. part weight | 500 kg |
| Spindle taper | HSK63 |
| Spindle motor power | 21 kW |
Netherlands
2014
| Axis X | 1600 mm |
|---|---|
| Axis Z | 1400 mm |
| CNC | Siemens 840D Solution Line |
| Table width | 1000 mm |
| Number of tool pockets | 180 |
| Max. spindle speed | 12000 rpm |
| Axis Y | 1100 mm |
|---|---|
| Rotary table (4th axis) | no |
| Table length | 1250 mm |
| Max. part weight | 3000 kg |
| Spindle taper | hsk100 |
| Spindle motor power | 52 kW |
Czech Republic
1999
| Axis X | 840 mm |
|---|---|
| Axis Z | 840 mm |
| CNC | |
| Table width | 500 mm |
| Spindle taper |
| Axis Y | 760 mm |
|---|---|
| Rotary table (4th axis) | no |
| Table length | 700 mm |
| Max. part weight | 1200 kg |
Czech Republic
| Axis X | 1800 mm |
|---|---|
| Axis Z | 1200 mm |
| CNC | FANUC |
| Table width | 1295 mm |
| Spindle taper |
| Axis Y | 1500 mm |
|---|---|
| Rotary table (4th axis) | no |
| Table length | 1295 mm |
| Max. part weight | 3992 kg |
Poland
1984
| Axis X | 1300 mm |
|---|---|
| Axis Z | 860 mm |
| CNC | FANUC SYSTEM 6M MODEL B |
| Table width | 1000 mm |
| Number of tool pockets | 180 |
| Max. spindle speed | 4000 rpm |
| Axis Y | 1000 mm |
|---|---|
| Rotary table (4th axis) | no |
| Table length | 1000 mm |
| Max. part weight | 2000 kg |
| Spindle taper | iso 50 |
| Spindle motor power | 18.5 kW |
| Axis X | 630 mm |
|---|---|
| Axis Z | 670 mm |
| CNC | MSX 501 |
| Table width | 500 mm |
| Number of tool pockets | 60 |
| Max. spindle speed | 14000 rpm |
| Axis Y | 600 mm |
|---|---|
| Rotary table (4th axis) | no |
| Table length | 500 mm |
| Max. part weight | 500 kg |
| Spindle taper | BT 40 |
| Spindle motor power | 56 kW |
Germany
2017
| Axis X | 560 mm |
|---|---|
| Axis Z | 660 mm |
| CNC | Sinumerik 840D mit Celos |
| Table width | 400 mm |
| Number of tool pockets | 60 |
| Max. spindle speed | 20000 rpm |
| Axis Y | 560 mm |
|---|---|
| Rotary table (4th axis) | yes |
| Table length | 400 mm |
| Max. part weight | kg |
| Spindle taper | HSK 63 |
| Spindle motor power | 35 kW |
| Axis X | 560 mm |
|---|---|
| Axis Z | 630 mm |
| CNC | |
| Table width | mm |
| Number of tool pockets | |
| Max. spindle speed | 14000 rpm |
| Axis Y | 560 mm |
|---|---|
| Rotary table (4th axis) | no |
| Table length | mm |
| Max. part weight | kg |
| Spindle taper | |
| Spindle motor power | kW |
Germany
2005
| Axis X | 630 mm |
|---|---|
| Axis Z | 700 mm |
| CNC | MSX-501 |
| Max. spindle speed | 14000 rpm |
| Axis Y | 600 mm |
|---|---|
| Rotary table (4th axis) | no |
| Spindle taper | ISO40 |
| Spindle motor power | 22 kW |
| Axis X | 730 mm |
|---|---|
| Axis Z | 850 mm |
| CNC | MORI SEIKI MSX-711 IV |
| Table width | 500 mm |
| Number of tool pockets | 60 |
| Max. spindle speed | 14000 rpm |
| Axis Y | 730 mm |
|---|---|
| Rotary table (4th axis) | no |
| Table length | 500 mm |
| Max. part weight | 500 kg |
| Spindle taper | ISO 40 |
| Spindle motor power | 18.5 kW |
| Axis X | 730 mm |
|---|---|
| Axis Z | 880 mm |
| CNC | MSX853IV |
| Table width | 500 mm |
| Number of tool pockets | 60 |
| Max. spindle speed | 12000 rpm |
| Axis Y | 730 mm |
|---|---|
| Rotary table (4th axis) | no |
| Table length | 500 mm |
| Max. part weight | 700 kg |
| Spindle taper | BT 40 |
| Spindle motor power | 22 kW |
Netherlands
2014
| Axis X | 1600 mm |
|---|---|
| Axis Z | 1400 mm |
| CNC | Siemens 840D Solution Line |
| Table width | 1000 mm |
| Spindle taper | |
| Spindle motor power | 52 kW |
| Axis Y | 1100 mm |
|---|---|
| Rotary table (4th axis) | no |
| Table length | 1250 mm |
| Max. part weight | 3000 kg |
| Max. spindle speed | 12000 rpm |
| Axis X | 730 mm |
|---|---|
| Axis Z | 880 mm |
| CNC |
| Axis Y | 730 mm |
|---|---|
| Rotary table (4th axis) | no |
| Spindle taper |
Poland
1984
| Axis X | 1300 mm |
|---|---|
| Axis Z | 860 mm |
| CNC | Fanuc 6M |
| Table width | 1000 mm |
| Number of tool pockets | 180 |
| Max. spindle speed | 4500 rpm |
| Axis Y | 1000 mm |
|---|---|
| Rotary table (4th axis) | no |
| Table length | 1000 mm |
| Max. part weight | 2000 kg |
| Spindle taper | BT50 |
| Spindle motor power | 22 kW |
| Axis X | 630 mm |
|---|---|
| Axis Z | 670 mm |
| CNC | Mori Seiki MSG501 |
| Table width | 500 mm |
| Number of tool pockets | 60 |
| Max. spindle speed | 14000 rpm |
| Axis Y | 600 mm |
|---|---|
| Rotary table (4th axis) | no |
| Table length | 500 mm |
| Max. part weight | 500 kg |
| Spindle taper | ISO 40 |
| Spindle motor power | 22 kW |
| Axis X | 1050 mm |
|---|---|
| Axis Z | 980 mm |
| CNC | Mapps 3 |
| Spindle taper | BT 50 |
| Spindle motor power | 37 kW |
| Axis Y | 900 mm |
|---|---|
| Rotary table (4th axis) | no |
| Max. part weight | 1500 kg |
| Max. spindle speed | 8000 rpm |
| Axis X | 900 mm |
|---|---|
| Axis Z | 980 mm |
| CNC | MORI SEIKI MSF-501 |
| Table width | 630 mm |
| Number of tool pockets | 60 |
| Max. spindle speed | 12000 rpm |
| Axis Y | 800 mm |
|---|---|
| Rotary table (4th axis) | no |
| Table length | 630 mm |
| Max. part weight | 1200 kg |
| Spindle taper | MAS BT-50 |
| Spindle motor power | 15 kW |
| Axis X | 560 mm |
|---|---|
| Axis Z | 510 mm |
| CNC | |
| Number of tool pockets | 120 |
| Max. spindle speed | 12000 rpm |
| Axis Y | 510 mm |
|---|---|
| Rotary table (4th axis) | no |
| Max. part weight | 500 kg |
| Spindle taper | BT 40 |
| Spindle motor power | 22 kW |
| Axis X | 560 mm |
|---|---|
| Axis Z | 660 mm |
| CNC | MSX853 |
| Table width | 400 mm |
| Number of tool pockets | 40 |
| Max. spindle speed | 12000 rpm |
| Axis Y | 560 mm |
|---|---|
| Rotary table (4th axis) | no |
| Table length | 400 mm |
| Max. part weight | 750 kg |
| Spindle taper | DIN 69871 |
| Axis X | 560 mm |
|---|---|
| Axis Z | 510 mm |
| CNC | |
| Table width | 400 mm |
| Spindle taper | bt 40 |
| Spindle motor power | 18.5 kW |
| Axis Y | 510 mm |
|---|---|
| Rotary table (4th axis) | no |
| Table length | 400 mm |
| Max. part weight | 500 kg |
| Max. spindle speed | 12000 rpm |
| Axis X | 730 mm |
|---|---|
| Axis Z | 850 mm |
| CNC | |
| Table width | 500 mm |
| Number of tool pockets | 60 |
| Max. spindle speed | 14000 rpm |
| Axis Y | 730 mm |
|---|---|
| Rotary table (4th axis) | no |
| Table length | 500 mm |
| Max. part weight | 500 kg |
| Spindle taper | |
| Spindle motor power | 18.5 kW |
| Axis X | 560 mm |
|---|---|
| Axis Z | 620 mm |
| CNC | MSX-701III |
| Table width | 398.8 mm |
| Number of tool pockets | 40 |
| Max. spindle speed | 14000 rpm |
| Axis Y | 560 mm |
|---|---|
| Rotary table (4th axis) | yes |
| Table length | 398.8 mm |
| Max. part weight | 399.3 kg |
| Spindle taper | |
| Spindle motor power | 18.6 kW |
Poland
1977
| Axis X | 1270 mm |
|---|---|
| Axis Z | 846 mm |
| CNC | FANUC 0i-MC |
| Table width | 900 mm |
| Number of tool pockets | 33 |
| Max. spindle speed | 3500 rpm |
| Axis Y | 914 mm |
|---|---|
| Rotary table (4th axis) | yes |
| Table length | 1500 mm |
| Max. part weight | 2000 kg |
| Spindle taper | BT50 |
| Spindle motor power | 22 kW |
USA
2007
| Axis X | 1038.86 mm |
|---|---|
| Axis Z | 1940.56 mm |
| CNC | Fanuc MXS-711 III CNC |
| Max. spindle speed | 8000 rpm |
| Axis Y | 254 mm |
|---|---|
| Rotary table (4th axis) | no |
| Spindle taper | Capto C8 |
| Rotary table (4th axis) | no |
|---|---|
| Spindle taper |
| CNC |
|---|
| Rotary table (4th axis) | no |
|---|---|
| Spindle taper |
| CNC |
|---|
| Axis X | 728.98 mm |
|---|---|
| Axis Z | 728.98 mm |
| CNC | |
| Table width | 500 mm |
| Number of tool pockets | 60 |
| Max. spindle speed | 120 rpm |
| Axis Y | 728.98 mm |
|---|---|
| Rotary table (4th axis) | no |
| Table length | 500 mm |
| Max. part weight | 700 kg |
| Spindle taper | |
| Spindle motor power | 30 kW |
| Axis X | 558.8 mm |
|---|---|
| Axis Z | 629.9 mm |
| CNC | |
| Table width | 398.8 mm |
| Number of tool pockets | 60 |
| Max. spindle speed | 14000 rpm |
| Axis Y | 558.8 mm |
|---|---|
| Rotary table (4th axis) | no |
| Table length | 398.8 mm |
| Max. part weight | 400 kg |
| Spindle taper | |
| Spindle motor power | 18.6 kW |
Хоризонтален обработващ център MORI SEIKI SH 400
Horizontální obráběcí centrum MORI SEIKI SH 400
MORI SEIKI SH 400 Vandret bearbejdningscenter
MORI SEIKI SH 400 Horizontales Bearbeitungszentrum
Οριζόντιο κέντρο κατεργασίας MORI SEIKI SH 400
MORI SEIKI SH 400 Horizontal machining center
Centro de mecanizado horizontal MORI SEIKI SH 400
Centre d'usinage horizontal MORI SEIKI SH 400
Horizontalni obradni centar MORI SEIKI SH 400
MORI SEIKI SH 400 Vízszintes megmunkáló központ
Centro di lavoro orizzontale MORI SEIKI SH 400
MORI SEIKI SH 400 Horizontalus apdirbimo centras
MORI SEIKI SH 400 Horizontaal bewerkingscentrum
Centrum obróbcze poziome MORI SEIKI SH 400
Centro de usinagem horizontal MORI SEIKI SH 400
Centru de prelucrare orizontal MORI SEIKI SH 400
MORI SEIKI SH 400 Горизонтальный обрабатывающий центр
Horizontalni obradni centar MORI SEIKI SH 400
MORI SEIKI SH 400 Horisontellt bearbetningscenter
Yatay işleme merkezi MORI SEIKI SH 400
Italy
Turkey
EN
- Languages
English (GB)