| Manufacturer | MORI SEIKI |
|---|---|
| Model | NL 2500 SY |
| Year | 2009 |
| Location | Spain
|
This MORI SEIKI NL 2500 SY is a high-precision 5-axis CNC multi-spindle lathe, manufactured in 2009. It features a maximum spindle speed of 4,000 rpm and a spindle power of 18 kW, supporting bar capacities up to 80 mm in diameter. The machine offers X-axis travel of 260 mm, Y-axis travel of 120 mm, and Z-axis travel of 795 mm, enabling complex multi-axis machining including simultaneous turning and milling, Y-axis machining, polar coordinate interpolation, and off-centre drilling and tapping. It is equipped with a robust 12-station turret featuring driven tools with a maximum speed of 6,000 rpm and 5.5 kW motor power, allowing for live tool milling and off-centre machining.
The machine incorporates a sub-spindle with 360° C-axis positioning and a main spindle with A2-8 spindle nose, both fitted with Kitagawa chucks (Ø250 mm main, Ø210 mm sub-spindle). It includes advanced features such as dual Renishaw tool measuring arms for automatic tool measurement, hardened box ways on all axes for precision, and direct drive spindle motors that eliminate belts and gearboxes.
Control is managed via the Mori Seiki MAPPS IV CNC system, supporting conversational programming, load monitoring, and tool wear/consumption tracking. Connectivity options include USB, PCMCIA, and RS-232 interfaces, along with a bar feeder interface.
Additional equipment visible includes an LNS BULK LOAD SERVO III automatic bar feeder with a 1.5 m capacity, a side-mounted hinge belt chip conveyor, and an automatic parts catcher. The machine is accompanied by documentation such as operation and programming manuals, parts lists, and electrical schematics. Safety features include emergency stop buttons and warning labels.
The lathe appears clean and well-maintained with minor signs of use. Hydraulic and electrical connections are visible at the rear, with some oil stains on the floor nearby. A blue coiled air hose is attached, and a blue tool cart with various parts is positioned beside the machine. This MORI SEIKI NL 2500 SY is suitable for manufacturing precision turned components for aerospace, automotive, medical, hydraulic, and general precision engineering applications.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
This 5-axis MORI SEIKI NL 2500 SY was manufactured in 2009. It features a maximum spindle speed of 4,000 rpm, a Y-axis travel of ±60 mm, and a Z-axis travel of 795 mm. The machine is equipped with a robust turret capacity of 12 stations and offers simultaneous turning and milling capabilities. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI NL 2500 SY turn-mill centre we have for sale. Contact us for further details.Rapid traverse rates:
X: 30 m/min
Z: 30 m/min
Y: 10 m/min
Main spindle:
Spindle nose: A2-8
Max bar capacity: 80 mm
Chuck: Kitagawa B-210, Ø250 mm
C-axis: 360° positioning
Sub-spindle:
Spindle nose: A2-6
Integrated motor power: 15 kW
Chuck: Kitagawa B-208, Ø210 mm
C-axis: 360° positioning
Parts transfer capability: Yes
Milling/driven tools:
Turret capacity: 12 stations
Driven tool stations: 12
Driven tool motor power: 5.5 kW
Max driven tool speed: 6,000 rpm
Direct drive tooling, live tool milling, off-centre machining
Turret and tooling:
Turret indexing time: 0.2 sec
Automatic tool measurement: Dual Renishaw tool measuring arms
Mechanical construction:
Guideways: Hardened box ways (prismatic) on all axes
Spindle drive: Built-in integrated motors
Transmission: Direct drive (no belts/gearboxes)
Starting torque: 640 Nm
CNC control:
Control: Mori Seiki MAPPS IV
Conversational programming, load monitoring, tool wear/consumption monitoring
Cooling and lubrication:
Main spindle oil cooler: Daikin
Sub-spindle oil cooler: Daikin
Connectivity:
USB, PCMCIA, RS-232
Bar feeder interface: Included
Machining capabilities:
Simultaneous turning and milling
Y-axis machining
Polar coordinate interpolation
Off-centre drilling and tapping
Front and back working with sub-spindle
Complete part machining in a single setup
Complex multi-axis machining
Typical applications:
Precision turned components
Aerospace parts
Automotive components
Hydraulic components
Medical components
General precision engineering
Additional equipment
LNS automatic bar feeder, 1.5 m capacity
Automatic parts catcher
Chip conveyor: Side-mounted hinge belt type
Independent chuck foot pedals (main and sub-spindle)
Electrical transformer
Documentation package:
Operation manual
Programming manual
Parts list
Electrical schematics
Tool holders: Static and driven tool holders included
Counter Spindle: yes
Driven Tools: yes
Machine Weight: 5800 kg
Number of Axes: 5
Spindle Power: 18 kW
Spindle Speed: 4000 RPM
X-axis Travel: 260 mm
Y-axis Travel: 120 mm
Z-axis Travel: 795 mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2041 |
| Last activity | Nov. 11, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
This 5-axis MORI SEIKI NL 2500 SY was manufactured in 2009. It features a maximum spindle speed of 4,000 rpm, a Y-axis travel of ±60 mm, and a Z-axis travel of 795 mm. The machine is equipped with a robust turret capacity of 12 stations and offers simultaneous turning and milling capabilities. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI NL 2500 SY turn-mill centre we have for sale. Contact us for further details.Rapid traverse rates:
X: 30 m/min
Z: 30 m/min
Y: 10 m/min
Main spindle:
Spindle nose: A2-8
Max bar capacity: 80 mm
Chuck: Kitagawa B-210, Ø250 mm
C-axis: 360° positioning
Sub-spindle:
Spindle nose: A2-6
Integrated motor power: 15 kW
Chuck: Kitagawa B-208, Ø210 mm
C-axis: 360° positioning
Parts transfer capability: Yes
Milling/driven tools:
Turret capacity: 12 stations
Driven tool stations: 12
Driven tool motor power: 5.5 kW
Max driven tool speed: 6,000 rpm
Direct drive tooling, live tool milling, off-centre machining
Turret and tooling:
Turret indexing time: 0.2 sec
Automatic tool measurement: Dual Renishaw tool measuring arms
Mechanical construction:
Guideways: Hardened box ways (prismatic) on all axes
Spindle drive: Built-in integrated motors
Transmission: Direct drive (no belts/gearboxes)
Starting torque: 640 Nm
CNC control:
Control: Mori Seiki MAPPS IV
Conversational programming, load monitoring, tool wear/consumption monitoring
Cooling and lubrication:
Main spindle oil cooler: Daikin
Sub-spindle oil cooler: Daikin
Connectivity:
USB, PCMCIA, RS-232
Bar feeder interface: Included
Machining capabilities:
Simultaneous turning and milling
Y-axis machining
Polar coordinate interpolation
Off-centre drilling and tapping
Front and back working with sub-spindle
Complete part machining in a single setup
Complex multi-axis machining
Typical applications:
Precision turned components
Aerospace parts
Automotive components
Hydraulic components
Medical components
General precision engineering
Additional equipment
LNS automatic bar feeder, 1.5 m capacity
Automatic parts catcher
Chip conveyor: Side-mounted hinge belt type
Independent chuck foot pedals (main and sub-spindle)
Electrical transformer
Documentation package:
Operation manual
Programming manual
Parts list
Electrical schematics
Tool holders: Static and driven tool holders included
Counter Spindle: yes
Driven Tools: yes
Machine Weight: 5800 kg
Number of Axes: 5
Spindle Power: 18 kW
Spindle Speed: 4000 RPM
X-axis Travel: 260 mm
Y-axis Travel: 120 mm
Z-axis Travel: 795 mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
This MORI SEIKI NL 2500 SY is a high-precision 5-axis CNC multi-spindle lathe, manufactured in 2009. It features a maximum spindle speed of 4,000 rpm and a spindle power of 18 kW, supporting bar capacities up to 80 mm in diameter. The machine offers X-axis travel of 260 mm, Y-axis travel of 120 mm, and Z-axis travel of 795 mm, enabling complex multi-axis machining including simultaneous turning and milling, Y-axis machining, polar coordinate interpolation, and off-centre drilling and tapping. It is equipped with a robust 12-station turret featuring driven tools with a maximum speed of 6,000 rpm and 5.5 kW motor power, allowing for live tool milling and off-centre machining.
The machine incorporates a sub-spindle with 360° C-axis positioning and a main spindle with A2-8 spindle nose, both fitted with Kitagawa chucks (Ø250 mm main, Ø210 mm sub-spindle). It includes advanced features such as dual Renishaw tool measuring arms for automatic tool measurement, hardened box ways on all axes for precision, and direct drive spindle motors that eliminate belts and gearboxes.
Control is managed via the Mori Seiki MAPPS IV CNC system, supporting conversational programming, load monitoring, and tool wear/consumption tracking. Connectivity options include USB, PCMCIA, and RS-232 interfaces, along with a bar feeder interface.
Additional equipment visible includes an LNS BULK LOAD SERVO III automatic bar feeder with a 1.5 m capacity, a side-mounted hinge belt chip conveyor, and an automatic parts catcher. The machine is accompanied by documentation such as operation and programming manuals, parts lists, and electrical schematics. Safety features include emergency stop buttons and warning labels.
The lathe appears clean and well-maintained with minor signs of use. Hydraulic and electrical connections are visible at the rear, with some oil stains on the floor nearby. A blue coiled air hose is attached, and a blue tool cart with various parts is positioned beside the machine. This MORI SEIKI NL 2500 SY is suitable for manufacturing precision turned components for aerospace, automotive, medical, hydraulic, and general precision engineering applications.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2041 |
| Last activity | Nov. 11, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
MORI SEIKI NL 2500 SY CNC многошпинделен струг
CNC vícehlavý soustruh MORI SEIKI NL 2500 SY
MORI SEIKI NL 2500 SY CNC multi-spindel drejebænk
MORI SEIKI NL 2500 SY CNC Mehrspindeldrehmaschine
CNC πολυαξονικός τόρνος MORI SEIKI NL 2500 SY
MORI SEIKI NL 2500 SY CNC multi-spindle lathe
Torno CNC multihusillo MORI SEIKI NL 2500 SY
Tour CNC multi-broches MORI SEIKI NL 2500 SY
MORI SEIKI NL 2500 SY CNC višenaponski tokarski stroj
MORI SEIKI NL 2500 SY CNC többorsós eszterga
Tornio CNC multi-mandrino MORI SEIKI NL 2500 SY
MORI SEIKI NL 2500 SY CNC daugiafunkcinis tekinimo staklės
MORI SEIKI NL 2500 SY CNC multi-spindel draaibank
Tokarka CNC wielowrzecionowa MORI SEIKI NL 2500 SY
Torno multieixo CNC MORI SEIKI NL 2500 SY
Strung CNC multi-tambur MORI SEIKI NL 2500 SY
Многошпиндельный токарный станок с ЧПУ MORI SEIKI NL 2500 SY
MORI SEIKI NL 2500 SY CNC многошипна стругарка
MORI SEIKI NL 2500 SY CNC fler-spindel svarv
MORI SEIKI NL 2500 SY CNC çok milli torna
EN
- Languages
English (GB)