| Manufacturer | MORI SEIKI |
|---|---|
| Model | NH 4000 DCG |
| Year | 2007 |
| Location | Germany
|
MORI SEIKI NH 4000 DCG horizontal machining centre, manufactured in 2007. This 4-axis machine has X-, Y- and Z-axis travels of 560 mm, 560 mm and 630 mm respectively, with a 400 × 400 mm pallet and a full fourth-axis rotary table. The stated rotary-table indexing is 0.001°. Maximum spindle speed is 14,000 rpm, and the machine has a 60-station tool storage capacity. The listed tool taper is SK 40.
The stated control is FANUC Series 31i-Model A (MAPPS III), with a 15-inch screen/CRT. Other listed features include a two-station turn-type automatic pallet changer, through-spindle coolant, a table-mounted Metrol sensor and an outside scraper-type chip conveyor with drum filter and rear disposal. The listed machining time is 21,788 hours. Machine weight is 9,800 kg.
The enclosed machine has viewing windows, access panels and a stack light. Its machining chamber contains a rotary table with a mounted multi-part workholding fixture, red-handled clamps and a horizontal spindle. A separate tank assembly with pump units, hoses, tubing and fittings is also shown beside the machine; its inclusion is not specified. The enclosure appears generally intact, with dirt and scuffing on some lower panels. Streaking and grime are visible around the enclosure and viewing window, while coolant residue and staining are present inside the machining chamber and around the fixture. The tool-holder compartment also shows dark residue. These visible condition details are provided for reference and do not indicate operational status.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
This 4-axis MORI SEIKI NH 4000 DCG was manufactured in 2007. It features an impressive X-axis travel of 560 mm, Y-axis travel of 560 mm, and Z-axis travel of 630 mm. The machine includes a full 4th axis rotary table and a spindle speed of 14,000 rpm. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI NH 4000 DCG horizontal machining centre we have for sale. Contact us for further details.- Operating Hours: 21,788 h (Machining time)
- Rotary Table / B-Axis Indexing: Full 4th axis rotary table (0.001° indexing)
- Rapid Traverse Rate: 50 m/min (X / Y / Z)
- CNC Control: FS-31iA (MAPPS III)
- Display: 15-inch screen / CRT
- Spindle Speed: 14,000 rpm (min-1)
- Spindle Drive Power: 18.5 / 11 kW (Standard)
- Tool Taper: SK40 / No. 40 (7/24 taper #40, MAS grip standard, 90° retention knob)
- Tool Storage Capacity: 60 stations
- Pallet Size: 400 x 400 mm (Square)
- Pallet Type: Tapped hole pattern (TAP)
- Pallet Changer: 2-station turn-type APC
- Through-Spindle Coolant (IKZ): Side through spindle coolant system (Offered with 40 bar / 7.0 MPa discharge pressure interface)
- Coolant Type: Water-soluble coolant
- Chip Management: Outside scraper type chip conveyor with drum filter, rear disposal
- In-Machine Measurement: Table mount sensor (Metrol)
- Supply Voltage / Power Rating: 200 V AC, 3 Phase, 50 Hz (Factory incoming voltage range: 380 V - 480 V via supplied wiring/transformer interface)
- Full Load Current: 121 A
- Spindle Motor Rated Current: 61 A
- Rated Power: 42 kVA
- Machine Mass: 9,800 kg
Control Brand: FANUC
Control Model: Series 31i-Model A
Machine Weight: 9800 kg
Number of Axes: 4
Tool Stations: 60
Spindle Speed: 14000 RPM
Taper Size: SK 40
Through-spindle Coolant: yes
X-axis Travel: 560 mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2058 |
| Last activity | Nov. 13, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
This 4-axis MORI SEIKI NH 4000 DCG was manufactured in 2007. It features an impressive X-axis travel of 560 mm, Y-axis travel of 560 mm, and Z-axis travel of 630 mm. The machine includes a full 4th axis rotary table and a spindle speed of 14,000 rpm. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI NH 4000 DCG horizontal machining centre we have for sale. Contact us for further details.- Operating Hours: 21,788 h (Machining time)
- Rotary Table / B-Axis Indexing: Full 4th axis rotary table (0.001° indexing)
- Rapid Traverse Rate: 50 m/min (X / Y / Z)
- CNC Control: FS-31iA (MAPPS III)
- Display: 15-inch screen / CRT
- Spindle Speed: 14,000 rpm (min-1)
- Spindle Drive Power: 18.5 / 11 kW (Standard)
- Tool Taper: SK40 / No. 40 (7/24 taper #40, MAS grip standard, 90° retention knob)
- Tool Storage Capacity: 60 stations
- Pallet Size: 400 x 400 mm (Square)
- Pallet Type: Tapped hole pattern (TAP)
- Pallet Changer: 2-station turn-type APC
- Through-Spindle Coolant (IKZ): Side through spindle coolant system (Offered with 40 bar / 7.0 MPa discharge pressure interface)
- Coolant Type: Water-soluble coolant
- Chip Management: Outside scraper type chip conveyor with drum filter, rear disposal
- In-Machine Measurement: Table mount sensor (Metrol)
- Supply Voltage / Power Rating: 200 V AC, 3 Phase, 50 Hz (Factory incoming voltage range: 380 V - 480 V via supplied wiring/transformer interface)
- Full Load Current: 121 A
- Spindle Motor Rated Current: 61 A
- Rated Power: 42 kVA
- Machine Mass: 9,800 kg
Control Brand: FANUC
Control Model: Series 31i-Model A
Machine Weight: 9800 kg
Number of Axes: 4
Tool Stations: 60
Spindle Speed: 14000 RPM
Taper Size: SK 40
Through-spindle Coolant: yes
X-axis Travel: 560 mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
MORI SEIKI NH 4000 DCG horizontal machining centre, manufactured in 2007. This 4-axis machine has X-, Y- and Z-axis travels of 560 mm, 560 mm and 630 mm respectively, with a 400 × 400 mm pallet and a full fourth-axis rotary table. The stated rotary-table indexing is 0.001°. Maximum spindle speed is 14,000 rpm, and the machine has a 60-station tool storage capacity. The listed tool taper is SK 40.
The stated control is FANUC Series 31i-Model A (MAPPS III), with a 15-inch screen/CRT. Other listed features include a two-station turn-type automatic pallet changer, through-spindle coolant, a table-mounted Metrol sensor and an outside scraper-type chip conveyor with drum filter and rear disposal. The listed machining time is 21,788 hours. Machine weight is 9,800 kg.
The enclosed machine has viewing windows, access panels and a stack light. Its machining chamber contains a rotary table with a mounted multi-part workholding fixture, red-handled clamps and a horizontal spindle. A separate tank assembly with pump units, hoses, tubing and fittings is also shown beside the machine; its inclusion is not specified. The enclosure appears generally intact, with dirt and scuffing on some lower panels. Streaking and grime are visible around the enclosure and viewing window, while coolant residue and staining are present inside the machining chamber and around the fixture. The tool-holder compartment also shows dark residue. These visible condition details are provided for reference and do not indicate operational status.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2058 |
| Last activity | Nov. 13, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
Хоризонтален обработващ център MORI SEIKI NH 4000 DCG
Horizontální obráběcí centrum MORI SEIKI NH 4000 DCG
MORI SEIKI NH 4000 DCG Vandret bearbejdningscenter
MORI SEIKI NH 4000 DCG Horizontales Bearbeitungszentrum
Οριζόντιο κέντρο κατεργασίας MORI SEIKI NH 4000 DCG
MORI SEIKI NH 4000 DCG Horizontal machining center
Centro de mecanizado horizontal MORI SEIKI NH 4000 DCG
Centre d'usinage horizontal MORI SEIKI NH 4000 DCG
Horizontalni obradni centar MORI SEIKI NH 4000 DCG
MORI SEIKI NH 4000 DCG Vízszintes megmunkáló központ
Centro di lavoro orizzontale MORI SEIKI NH 4000 DCG
MORI SEIKI NH 4000 DCG Horizontalus apdirbimo centras
MORI SEIKI NH 4000 DCG Horizontaal bewerkingscentrum
Centrum obróbcze poziome MORI SEIKI NH 4000 DCG
Centro de usinagem horizontal MORI SEIKI NH 4000 DCG
Centru de prelucrare orizontal MORI SEIKI NH 4000 DCG
MORI SEIKI NH 4000 DCG Горизонтальный обрабатывающий центр
Horizontalni obradni centar MORI SEIKI NH 4000 DCG
MORI SEIKI NH 4000 DCG Horisontellt bearbetningscenter
Yatay işleme merkezi MORI SEIKI NH 4000 DCG
EN
- Languages
English (GB)