| Manufacturer | Mitutoyo |
|---|---|
| Model | Crysta-Plus M7106 |
| Year | 2017 |
| Location | Germany
|
Mitutoyo Crysta-Plus M7106 coordinate measuring machine, manufactured in 2017, for dimensional measurement. This three-axis machine has an X-axis travel of 700 mm, Y-axis travel of 1,000 mm and Z-axis travel of 600 mm. It is built around a large granite measuring table with an overhead bridge and vertical carriage. A probe assembly is mounted beneath the carriage, and the listed configuration includes a Renishaw MH20i probe head, Renishaw TP20 probe and standard-force probe module. The listed stylus configuration is 20 mm in length with a 3.9924 mm ball diameter.
The supplied technical details list a UD1 controller and MCOSMOS-1 software, version 4.2R1. The maximum handling weight is stated as 1,000 kg. The listed maximum permissible length measurement error is 4.5 + 4.5 × L/1000 µm, where L is in mm. A single-stylus form error of 3.6 µm is specified, with an MPE of 4.5 µm. The last calibration date provided is 04.04.2023.
The current description reports very low operating hours, regular servicing and near-mint condition. In the available views, the machine appears assembled and clean, with no obvious visible damage; another view shows it protected by clear stretch wrap, which limits inspection of its components and condition. A wired handheld control unit is also shown resting at the front-left edge of the table. The machine is identified as a Mitutoyo Crysta-Plus M7106 coordinate measuring machine.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
This 3-axis Mitutoyo Crysta-Plus M7106 was manufactured in 2017. It features a measuring range of 700 x 1,000 x 600 mm and is in near-mint condition with very low operating hours. The machine includes a Renishaw probe head and is regularly serviced. If you are looking to get high-quality 3D measurement capabilities, consider the Mitutoyo Crysta-Plus M7106 gantry robot we have for sale. Contact us for further details.- Measuring Range (X / Y / Z): 700 x 1,000 x 600 mm
- Operating Hours: Very low (rarely used)
- Technical Condition: Near-mint / Exceptionally good condition
- Measuring Range (X / Y / Z): 700 x 1000 x 600 mm
- Maximum Spatial Diagonal Tested: Up to 1515 mm
- Controller Type: UD1
- Software Version: MCOSMOS-1 v4.2R1
- Probe Head: Renishaw MH20i
- Probe: Renishaw TP20
- Probe Module: Standard Force (SF)
- Stylus Configuration: Length 20 mm, Stylus ball diameter 3.9924 mm
- Maximum Permissible Length Measurement Error (EL, MPE): 4.5 + 4.5 * L/1000 µm (where L is in mm)
- Single Stylus Form Error (PForm.Sph.1x25:SS:Tact): 3.6 µm (MPE: 4.5 µm)
- Last Calibration Date: 04.04.2023
Max. Handling Weight: 1000 kg
Number of Axes: 3
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2059 |
| Last activity | Nov. 2, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
This 3-axis Mitutoyo Crysta-Plus M7106 was manufactured in 2017. It features a measuring range of 700 x 1,000 x 600 mm and is in near-mint condition with very low operating hours. The machine includes a Renishaw probe head and is regularly serviced. If you are looking to get high-quality 3D measurement capabilities, consider the Mitutoyo Crysta-Plus M7106 gantry robot we have for sale. Contact us for further details.- Measuring Range (X / Y / Z): 700 x 1,000 x 600 mm
- Operating Hours: Very low (rarely used)
- Technical Condition: Near-mint / Exceptionally good condition
- Measuring Range (X / Y / Z): 700 x 1000 x 600 mm
- Maximum Spatial Diagonal Tested: Up to 1515 mm
- Controller Type: UD1
- Software Version: MCOSMOS-1 v4.2R1
- Probe Head: Renishaw MH20i
- Probe: Renishaw TP20
- Probe Module: Standard Force (SF)
- Stylus Configuration: Length 20 mm, Stylus ball diameter 3.9924 mm
- Maximum Permissible Length Measurement Error (EL, MPE): 4.5 + 4.5 * L/1000 µm (where L is in mm)
- Single Stylus Form Error (PForm.Sph.1x25:SS:Tact): 3.6 µm (MPE: 4.5 µm)
- Last Calibration Date: 04.04.2023
Max. Handling Weight: 1000 kg
Number of Axes: 3
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Mitutoyo Crysta-Plus M7106 coordinate measuring machine, manufactured in 2017, for dimensional measurement. This three-axis machine has an X-axis travel of 700 mm, Y-axis travel of 1,000 mm and Z-axis travel of 600 mm. It is built around a large granite measuring table with an overhead bridge and vertical carriage. A probe assembly is mounted beneath the carriage, and the listed configuration includes a Renishaw MH20i probe head, Renishaw TP20 probe and standard-force probe module. The listed stylus configuration is 20 mm in length with a 3.9924 mm ball diameter.
The supplied technical details list a UD1 controller and MCOSMOS-1 software, version 4.2R1. The maximum handling weight is stated as 1,000 kg. The listed maximum permissible length measurement error is 4.5 + 4.5 × L/1000 µm, where L is in mm. A single-stylus form error of 3.6 µm is specified, with an MPE of 4.5 µm. The last calibration date provided is 04.04.2023.
The current description reports very low operating hours, regular servicing and near-mint condition. In the available views, the machine appears assembled and clean, with no obvious visible damage; another view shows it protected by clear stretch wrap, which limits inspection of its components and condition. A wired handheld control unit is also shown resting at the front-left edge of the table. The machine is identified as a Mitutoyo Crysta-Plus M7106 coordinate measuring machine.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2059 |
| Last activity | Nov. 2, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
Мерна единица Mitutoyo Crysta-Plus M7106
Měřící zařízení Mitutoyo Crysta-Plus M7106
Mitutoyo Crysta-Plus M7106 Måleenhed
Mitutoyo Crysta-Plus M7106 Messbänk
Μονάδα μέτρησης Mitutoyo Crysta-Plus M7106
Mitutoyo Crysta-Plus M7106 Measuring unit
Banco de medida Mitutoyo Crysta-Plus M7106
Outil de mesure Mitutoyo Crysta-Plus M7106
Mjerna jedinica Mitutoyo Crysta-Plus M7106
Mitutoyo Crysta-Plus M7106 Mérőegység
Unità di misurazione Mitutoyo Crysta-Plus M7106
Mitutoyo Crysta-Plus M7106 Matavimo vienetas
Mitutoyo Crysta-Plus M7106 Meeteenheid
Urządzenie pomiarowe Mitutoyo Crysta-Plus M7106
Unidade de medida Mitutoyo Crysta-Plus M7106
Unitate de masura Mitutoyo Crysta-Plus M7106
Mitutoyo Crysta-Plus M7106 Измерительное устройство
Merna jedinica Mitutoyo Crysta-Plus M7106
Mitutoyo Crysta-Plus M7106 Mätenhet
Ölçüm ünitesi Mitutoyo Crysta-Plus M7106
EN
- Languages
English (GB)