| Category | Measure / Control - Measuring units |
| X-axis travel | 400 mm |
| Y-axis travel | 400 mm |
| Z-axis travel | 300 mm |
| Accuracy | 0.01 mm |
| Type of measurement | dimensional |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | Mitutoyo Crysta-Plus M443 |
| Last availability date | 17/11/2026 |
| Product id | P260925184 |
| Language |
Mitutoyo Crysta-Plus M443 — 3-axis manual CMM (manufactured 2016)
Overview
This Mitutoyo Crysta-Plus M443 is a manual 3-axis coordinate measuring machine suitable for individual inspections and the creation of measurement programs for small batches. It is intended for precision dimensional inspection where tactile probing and manual positioning are appropriate.
Key specifications
- Year: 2016
- Measuring range: 400 × 400 × 300 mm (note: effective range is slightly reduced by probe head clearance)
- Operation: Manual (hand-moved)
- Probe head: MH20i manual indexing head with 15° indexing increments
- Probe/sensor: TP20 tactile probe
- Software: Mitutoyo MCOSMOS
Performance
- Overall accuracy: approx. 7–8 µm (<0.01 mm)
- Length measurement error: 3.0 + 4L/1000 µm
- Probing error: 4 µm
Intended use
The M443’s configuration is appropriate for one-off inspections, fixture-less checks, and for producing measurement programs that can be used for small-batch inspection. The manual indexing head and TP20 probe allow flexible tactile probing with indexed orientations for accessing features.
Utilities and included equipment
- Required utilities: electricity and compressed air
- Included: MH20i probe head; TP20 probe; stylus rack; standard-force probe modules; MCOSMOS software
Condition
Condition has not been specified in the provided information.
Notes
This description lists the supplied configuration and published performance figures as provided. No additional condition, service history, or operational guarantees are stated.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
This 3-axis Mitutoyo Crysta-Plus M443 was manufactured in 2016. It features a measuring range of 400 × 400 × 300 mm and is equipped with a MH20i manual indexing head and TP20 tactile probe. This manual coordinate measuring machine is suitable for individual inspections and can create measurement programs for small batches. If you are looking to get high-quality inspection capabilities, consider the Mitutoyo Crysta-Plus M443 machine we have for sale. Contact us for further details.Condition:
Measuring range: 400 × 400 × 300 mm (effective range slightly reduced by probe head space)
Operation: Manual, moved by hand
Probe head: MH20i manual indexing head, 15° increments
Probe/sensor: TP20 tactile probe
Software: Mitutoyo MCOSMOS
Accuracy (overall): approx. 7–8 µm (<0.01 mm)
Length measurement error: 3.0 + 4L/1000 µm
Probing error: 4 µm
Application: One-off/individual inspections; can create programs and inspect small batches
Required utilities: Electricity and compressed air
Included equipment: MH20i probe head; TP20 probe; stylus rack; standard-force probe modules; MCOSMOS software
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2029 |
| Last activity | Nov. 17, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
This 3-axis Mitutoyo Crysta-Plus M443 was manufactured in 2016. It features a measuring range of 400 × 400 × 300 mm and is equipped with a MH20i manual indexing head and TP20 tactile probe. This manual coordinate measuring machine is suitable for individual inspections and can create measurement programs for small batches. If you are looking to get high-quality inspection capabilities, consider the Mitutoyo Crysta-Plus M443 machine we have for sale. Contact us for further details.Condition:
Measuring range: 400 × 400 × 300 mm (effective range slightly reduced by probe head space)
Operation: Manual, moved by hand
Probe head: MH20i manual indexing head, 15° increments
Probe/sensor: TP20 tactile probe
Software: Mitutoyo MCOSMOS
Accuracy (overall): approx. 7–8 µm (<0.01 mm)
Length measurement error: 3.0 + 4L/1000 µm
Probing error: 4 µm
Application: One-off/individual inspections; can create programs and inspect small batches
Required utilities: Electricity and compressed air
Included equipment: MH20i probe head; TP20 probe; stylus rack; standard-force probe modules; MCOSMOS software
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Category | Measure / Control - Measuring units |
| X-axis travel | 400 mm |
| Y-axis travel | 400 mm |
| Z-axis travel | 300 mm |
| Accuracy | 0.01 mm |
| Type of measurement | dimensional |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | Mitutoyo Crysta-Plus M443 |
| Last availability date | 17/11/2026 |
| Product id | P260925184 |
| Language |
Mitutoyo Crysta-Plus M443 — 3-axis manual CMM (manufactured 2016)
Overview
This Mitutoyo Crysta-Plus M443 is a manual 3-axis coordinate measuring machine suitable for individual inspections and the creation of measurement programs for small batches. It is intended for precision dimensional inspection where tactile probing and manual positioning are appropriate.
Key specifications
- Year: 2016
- Measuring range: 400 × 400 × 300 mm (note: effective range is slightly reduced by probe head clearance)
- Operation: Manual (hand-moved)
- Probe head: MH20i manual indexing head with 15° indexing increments
- Probe/sensor: TP20 tactile probe
- Software: Mitutoyo MCOSMOS
Performance
- Overall accuracy: approx. 7–8 µm (<0.01 mm)
- Length measurement error: 3.0 + 4L/1000 µm
- Probing error: 4 µm
Intended use
The M443’s configuration is appropriate for one-off inspections, fixture-less checks, and for producing measurement programs that can be used for small-batch inspection. The manual indexing head and TP20 probe allow flexible tactile probing with indexed orientations for accessing features.
Utilities and included equipment
- Required utilities: electricity and compressed air
- Included: MH20i probe head; TP20 probe; stylus rack; standard-force probe modules; MCOSMOS software
Condition
Condition has not been specified in the provided information.
Notes
This description lists the supplied configuration and published performance figures as provided. No additional condition, service history, or operational guarantees are stated.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2029 |
| Last activity | Nov. 17, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.