Contact us to receive an offer.
| Manufacturer | Mitsubishi |
|---|---|
| Model | EA8 |
| Year | 2010 |
| Location | Portugal
|
This listing is for a Mitsubishi Electric EA8 die sinking EDM (Electrical Discharge Machine) equipped with advanced CNC control, ideal for precision machining tasks such as die penetration, contouring, engraving, and drilling. Manufactured in 2010, this machine features a robust work area measuring 762 mm in length, 497 mm in width, and 248 mm in height, supported by a travel range of 300 mm (X axis), 250 mm (Y axis), and 250 mm (Z axis). The machine dimensions are 1650 mm in height, 1730 mm in width, and 2000 mm in length, with a total weight of approximately 2000 kg.
The EA8 model includes a 60 A generator and is capable of handling maximum workpiece and electrode weights of 550 kg and 25 kg, respectively. A magnet on the table aids in securing workpieces during operation. The machine is equipped with a control panel featuring a screen displaying machine status, coordinates, and machining parameters, along with multiple labeled buttons, an emergency stop button, power buttons, and a numeric keypad. Additionally, a remote control keypad is attached to the right side of the control panel. A key switch for power mode selection is also present.
The machine's front panel incorporates two black handles for access, transparent viewing windows, and safety warning labels. On the side panel, there is a pressure gauge and adjustment knob, as well as a protective transparent side shield. The rear of the machine shows several connected electrical and hydraulic units, cables, hoses, and a large vent or exhaust structure on the upper rear section.
The work tank contains fluid, which shows some discoloration, and includes tool holders or electrodes stored on the left side. The machine surfaces, including the control panel and body, exhibit signs of use such as dirt and wear marks. Transport is at the buyer's expense. For further inquiries or to arrange a video demonstration or in-person viewing, please do not hesitate to contact us.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Mitsubishi Electric EA8 Sinker EDM in great condition
Only used a few times.
Video demonstration possible, as well as in person.
All accessories complete and included.
A reliable and powerful machine that meets your EDM needs. Ideal for precision machining.
It is equipped with an advanced CNC control system that provides easy operation and quick set-up.
Used for die penetration, contouring, engraving and drilling.
Year built: NOV - 2010
X,Y,Z 300 x 250 x 250 mm
Working area: 762 x 497 x 248 mm
60 A generator
Maximum workpiece weight: 550 kg
Maximum electrode weight: 25 kg
Magnet on table
Machine weight: 2000kg
Machine dimensions: 1650 x 1730 x 2000 mm
Transport at the buyer's expense.
Any questions
Do not hesitate to contact us
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Factory – small or medium company |
| Active since | 2025 |
| Offers online | 4 |
| Last activity | Sept. 8, 2026 |
Mitsubishi Electric EA8 Sinker EDM in great condition
Only used a few times.
Video demonstration possible, as well as in person.
All accessories complete and included.
A reliable and powerful machine that meets your EDM needs. Ideal for precision machining.
It is equipped with an advanced CNC control system that provides easy operation and quick set-up.
Used for die penetration, contouring, engraving and drilling.
Year built: NOV - 2010
X,Y,Z 300 x 250 x 250 mm
Working area: 762 x 497 x 248 mm
60 A generator
Maximum workpiece weight: 550 kg
Maximum electrode weight: 25 kg
Magnet on table
Machine weight: 2000kg
Machine dimensions: 1650 x 1730 x 2000 mm
Transport at the buyer's expense.
Any questions
Do not hesitate to contact us
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
This listing is for a Mitsubishi Electric EA8 die sinking EDM (Electrical Discharge Machine) equipped with advanced CNC control, ideal for precision machining tasks such as die penetration, contouring, engraving, and drilling. Manufactured in 2010, this machine features a robust work area measuring 762 mm in length, 497 mm in width, and 248 mm in height, supported by a travel range of 300 mm (X axis), 250 mm (Y axis), and 250 mm (Z axis). The machine dimensions are 1650 mm in height, 1730 mm in width, and 2000 mm in length, with a total weight of approximately 2000 kg.
The EA8 model includes a 60 A generator and is capable of handling maximum workpiece and electrode weights of 550 kg and 25 kg, respectively. A magnet on the table aids in securing workpieces during operation. The machine is equipped with a control panel featuring a screen displaying machine status, coordinates, and machining parameters, along with multiple labeled buttons, an emergency stop button, power buttons, and a numeric keypad. Additionally, a remote control keypad is attached to the right side of the control panel. A key switch for power mode selection is also present.
The machine's front panel incorporates two black handles for access, transparent viewing windows, and safety warning labels. On the side panel, there is a pressure gauge and adjustment knob, as well as a protective transparent side shield. The rear of the machine shows several connected electrical and hydraulic units, cables, hoses, and a large vent or exhaust structure on the upper rear section.
The work tank contains fluid, which shows some discoloration, and includes tool holders or electrodes stored on the left side. The machine surfaces, including the control panel and body, exhibit signs of use such as dirt and wear marks. Transport is at the buyer's expense. For further inquiries or to arrange a video demonstration or in-person viewing, please do not hesitate to contact us.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2025 |
| Offers online | 4 |
| Last activity | Sept. 8, 2026 |
Щампова потъваща EDM машина Mitsubishi EA8
Elektroerozivní hloubička Mitsubishi EA8
Mitsubishi EA8 Die synkende edm maskine
Mitsubishi EA8 Senkerodiermaschine
Die sinking edm μηχάνημα Mitsubishi EA8
Mitsubishi EA8 Die sinking edm machine
Máquina de electroerosión por penetración Mitsubishi EA8
Machine d'électro-érosion par enfonçage Mitsubishi EA8
EDM stroj za tonjenje Mitsubishi EA8
Mitsubishi EA8 Süllyedő edm gép
Elettroerosione a tuffo Mitsubishi EA8
Diegimo EDM mašina Mitsubishi EA8
Mitsubishi EA8 Zinkende zinkvonkmachine
Elektrodrążarka wgłębna Mitsubishi EA8
Mitsubishi Electric EA8 Sinker EDM
Mașină de electroerosionare cu scufundare a matriței Mitsubishi EA8
Mitsubishi EA8 Копировально-прошивочный станок
Die tone edm mašina Mitsubishi EA8
Mitsubishi EA8 Sjunkande edm-maskin
Dalma erozyon makinesi Mitsubishi EA8
EN
- Languages
English (GB)