Price on request
Make an offerContact us to receive an offer.
| Power in tons | 60 T |
| Table length | mm |
| Table width | mm |
| Ram stroke | 76.2 mm |
| Nbr of strokes/min | 250 |
| Distance between columns | mm |
| Engine Power | 50 kW |
| ------------------- | |
| Length x width x height | 1500.0 × 1000.0 × 3000.0 |
| Weight | 8000 kg |
| worked hours | |
| hours under power | |
| state | excellent |
| At local norms | yes |
| status | in production |
| Datasheet | Minster P2-60-36 |
| Last availability date | 04/12/2025 |
For sale is a Minster P2-60-36 eccentric press manufactured in 1978. This American-made industrial press is designed for high-speed operations with a tonnage capacity of 60 tons. It features a ram stroke of 76.2 mm and can achieve up to 250 strokes per minute, making it suitable for various metal forming and stamping applications.
The press is powered by a 50 kW electric motor, mounted on the top left side of the machine. It operates on 380 volts, 3-phase, 50-cycle power supply, with a clutch control voltage of 110 volts, single-phase, 50-cycle. The clutch is located at the crankshaft and is of type 26-CFC with two discs. The lubrication system used is Monitorflow.
Structurally, the machine appears intact with no visible damage. While the surface shows some wear consistent with industrial use, there are no major defects noted. The machine is painted green and includes a flywheel housing with a central shaft. A flexible cable or hose is attached to the flywheel housing.
Additional features include a metal chute or tray attached below the working area, which may assist in material handling. The press has a bolster shutheight of 11 inches and a bed shutheight of 13.5 inches, with tie rod shrinkage measurements of 0.057 inches on both left and right sides.
Dimensions of the press are approximately 1500 mm in length, 1000 mm in width, and 3000 mm in height, with a total weight of around 8000 kg. This machine is suitable for buyers looking for a robust, high-capacity eccentric press from a reputable manufacturer.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
1978 model american minster high speed press is for sale.
sheet roll opener
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
What year was this Minster P2-60-36 press manufactured?
This Minster P2-60-36 High Speed Eccentric press was manufactured in 1978.
What components are included with the equipment?
This equipment includes a decoiler, feeding unit, and control panel.
Is this Minster P2-60-36 press currently in production?
This Minster P2-60-36 press is currently not in production.
Is the equipment currently visible under power?
This equipment is visible under power.
Does this Minster P2-60-36 press have CE certification?
This Minster P2-60-36 press is expected to have CE certification.
Can the equipment be inspected under power?
This equipment is available for inspection under power.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2020 |
| Offers online | 1 |
| Last activity | Sept. 14, 2025 |
1978 model american minster high speed press is for sale.
sheet roll opener
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
What year was this Minster P2-60-36 press manufactured?
This Minster P2-60-36 High Speed Eccentric press was manufactured in 1978.
What components are included with the equipment?
This equipment includes a decoiler, feeding unit, and control panel.
Is this Minster P2-60-36 press currently in production?
This Minster P2-60-36 press is currently not in production.
Is the equipment currently visible under power?
This equipment is visible under power.
Does this Minster P2-60-36 press have CE certification?
This Minster P2-60-36 press is expected to have CE certification.
Can the equipment be inspected under power?
This equipment is available for inspection under power.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Power in tons | 60 T |
| Table length | mm |
| Table width | mm |
| Ram stroke | 76.2 mm |
| Nbr of strokes/min | 250 |
| Distance between columns | mm |
| Engine Power | 50 kW |
| ------------------- | |
| Length x width x height | 1500.0 × 1000.0 × 3000.0 |
| Weight | 8000 kg |
| worked hours | |
| hours under power | |
| state | excellent |
| At local norms | yes |
| status | in production |
| Datasheet | Minster P2-60-36 |
| Last availability date | 04/12/2025 |
For sale is a Minster P2-60-36 eccentric press manufactured in 1978. This American-made industrial press is designed for high-speed operations with a tonnage capacity of 60 tons. It features a ram stroke of 76.2 mm and can achieve up to 250 strokes per minute, making it suitable for various metal forming and stamping applications.
The press is powered by a 50 kW electric motor, mounted on the top left side of the machine. It operates on 380 volts, 3-phase, 50-cycle power supply, with a clutch control voltage of 110 volts, single-phase, 50-cycle. The clutch is located at the crankshaft and is of type 26-CFC with two discs. The lubrication system used is Monitorflow.
Structurally, the machine appears intact with no visible damage. While the surface shows some wear consistent with industrial use, there are no major defects noted. The machine is painted green and includes a flywheel housing with a central shaft. A flexible cable or hose is attached to the flywheel housing.
Additional features include a metal chute or tray attached below the working area, which may assist in material handling. The press has a bolster shutheight of 11 inches and a bed shutheight of 13.5 inches, with tie rod shrinkage measurements of 0.057 inches on both left and right sides.
Dimensions of the press are approximately 1500 mm in length, 1000 mm in width, and 3000 mm in height, with a total weight of around 8000 kg. This machine is suitable for buyers looking for a robust, high-capacity eccentric press from a reputable manufacturer.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2020 |
| Offers online | 1 |
| Last activity | Sept. 14, 2025 |
Minster P2-60-36
Výstředníkový lis Minster P2-60-36
Minster P2-60-36
Minster P2-60-36 Exzenterpresse
Minster P2-60-36
Minster P2-60-36 High Speed Eccentric press
Prensa excéntrica Minster P2-60-36
Presse excentrique Minster P2-60-36
Minster P2-60-36
Minster P2-60-36
Pressa eccentrica Minster P2-60-36
Minster P2-60-36
Minster P2-60-36
Prasa mimośrodowa Minster P2-60-36
Minster P2-60-36
Minster P2-60-36
Minster P2-60-36 Эксцентриковый пресс
Minster P2-60-36
Minster P2-60-36
Eksantrik pres Minster P2-60-36
EN
- Languages
English (GB)