Contact us to receive an offer.
| Category | Milling - Miscellaneous milling machines |
| CNC type | |
| Table length | 2500 mm |
| Table width | 1500 mm |
| Table area (mm x mm) | |
| Spindle taper | |
| worked hours | 15000 hours |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | visible |
| Datasheet | Microstep MicroMill 2501.15F |
| Last availability date | 13/11/2026 |
| Product id | P250714132 |
| Language |
This listing features a MicroStep MicroMill 2501.15F CNC milling machine, manufactured in 2012. The machine is equipped with a large worktable measuring 2500 mm in length and 1500 mm in width, suitable for handling sizable material sheets. The milling unit is mounted on a gantry system, which includes coordinate markings (Y1 and Z1) for precise positioning of the cutting head. The frame of the machine is painted in orange and blue, indicating a robust industrial design. A flexible cable carrier is installed to guide cables from the gantry to the cutting head, ensuring organized cable management during operation.
The machine includes several pieces of equipment to support its functionality: a vacuum suction system WITTE 84413 for material hold-down, a filtration unit Nedermann E-PAK 500 for dust and debris management, and three mechanical grippers operated via manual pneumatic control located on one side of the table. Additionally, there is a static magazine capable of holding 8 tools, positioned at the end of the table, facilitating tool changes during milling processes.
The control system used is iMSNC, and it runs on Asper 3.5 Basic software, allowing for effective CNC operation. The machine has recorded approximately 15,000 operating hours. The worktable currently holds a material sheet with engraved outlines, indicating recent or ongoing milling activity. This machine is suitable for industrial milling applications requiring a large working area and integrated material handling features.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Characteristic:
Control system: iMSNC
Software: Asper 3.5 – Basic
Hours on: 15000 h
Length of the working table: 2500 mm
Width of the working table: 1500 mm
Source: MicroMill 2501.15F
Equipment:
Vacuum suction WITTE 84413
Filtration Nedermann E-PAK 500
3 mechanical grippers with manual pneumatic control on one side
Static magazine for 8 tools at the end of the table
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2008 |
| Offers online | 1159 |
| Last activity | Nov. 16, 2026 |
Characteristic:
Control system: iMSNC
Software: Asper 3.5 – Basic
Hours on: 15000 h
Length of the working table: 2500 mm
Width of the working table: 1500 mm
Source: MicroMill 2501.15F
Equipment:
Vacuum suction WITTE 84413
Filtration Nedermann E-PAK 500
3 mechanical grippers with manual pneumatic control on one side
Static magazine for 8 tools at the end of the table
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Category | Milling - Miscellaneous milling machines |
| CNC type | |
| Table length | 2500 mm |
| Table width | 1500 mm |
| Table area (mm x mm) | |
| Spindle taper | |
| worked hours | 15000 hours |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | visible |
| Datasheet | Microstep MicroMill 2501.15F |
| Last availability date | 13/11/2026 |
| Product id | P250714132 |
| Language |
This listing features a MicroStep MicroMill 2501.15F CNC milling machine, manufactured in 2012. The machine is equipped with a large worktable measuring 2500 mm in length and 1500 mm in width, suitable for handling sizable material sheets. The milling unit is mounted on a gantry system, which includes coordinate markings (Y1 and Z1) for precise positioning of the cutting head. The frame of the machine is painted in orange and blue, indicating a robust industrial design. A flexible cable carrier is installed to guide cables from the gantry to the cutting head, ensuring organized cable management during operation.
The machine includes several pieces of equipment to support its functionality: a vacuum suction system WITTE 84413 for material hold-down, a filtration unit Nedermann E-PAK 500 for dust and debris management, and three mechanical grippers operated via manual pneumatic control located on one side of the table. Additionally, there is a static magazine capable of holding 8 tools, positioned at the end of the table, facilitating tool changes during milling processes.
The control system used is iMSNC, and it runs on Asper 3.5 Basic software, allowing for effective CNC operation. The machine has recorded approximately 15,000 operating hours. The worktable currently holds a material sheet with engraved outlines, indicating recent or ongoing milling activity. This machine is suitable for industrial milling applications requiring a large working area and integrated material handling features.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2008 |
| Offers online | 1159 |
| Last activity | Nov. 16, 2026 |