Contact us to receive an offer.
| Manufacturer | Micro Step |
|---|---|
| Model | MG 6001.20 PRB+CH 800 P+HPR 260 |
| Year | 2008 |
| Location | Sweden
|
This listing features a Micro Step MG 6001.20 PRB+CH 800 P+HPR 260 cutting machine, manufactured in 2008. It is a large industrial CNC cutting system designed for plasma and gas cutting, with a total power of 9000 W. The machine is equipped with two cutting heads, enabling efficient processing of metal sheets. It supports metal sheets up to 6000 mm in length and 2000 mm in width.
The cutting table is painted in yellow and blue and includes a gantry and cutting heads. The system integrates a sectional extractor and an industrial dust collector unit labeled 'Donaldson Torit DCE,' which is included to manage dust and fumes during operation. The machine also includes metal rollers and guides to facilitate the feeding of material into the cutting area.
The CNC control panel features a touchscreen interface branded 'MicroStep,' although it shows signs of wear, including some tape and worn areas around the keyboard section. The machine's surfaces and components exhibit visible signs of use, such as dirt, scratches, and paint wear, but the overall structure appears intact.
Additional accessories include a gas regulator panel with gauges and control valves for Oxygen, Acetylene, and Propane gases, mounted on a white wall with connected hoses. Ventilation ducting and overhead lighting are present in the workshop environment where the machine is installed.
This cutting system comes with various software modules including AsperWin Basic, Enclosure, Phase Milling, Pipe Cutting, and Chamfering modules. It also features a drill head MG-22 capable of drilling up to 22 mm and tapping up to 16 mm, with an ecological cooling system for the drill. Automatic tool change is supported via a clamping magazine with six ISO 40 tools.
The machine is suitable for complex cutting tasks involving metal sheets and pipes, including pipe cutting with the RSV 100-500 HHP device and chamfering. Support rollers and rails are provided for handling square pipes up to 500 mm diameter. The system includes a signal lamp and remote controls for filter unit operation.
Overall, this Micro Step cutting machine is a comprehensive plasma and gas cutting solution with integrated CNC control, suitable for industrial metal fabrication environments. The equipment shows typical signs of use but maintains all major components and accessories as described.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Description of the product
Number of cutting heads: 1
Number of drilling heads: 1
Table length: L [m] 6
Table width: Weight [m] 2
Channel width: WCH [m] 0.8
Cutting machine with cutting table and sectional extractor: 1
USB flash drive (USB 2.0): 1
Basic tool station type R (A, B axis for MG): 1
Remote diagnosis: 1
AsperWin - Basic module: 1
AsperWin - Enclosure module: 1
AsperWin - Phase milling module: 1
AsperWin - Pipe cutting module: 1
AsperWin - Chamfering module (SolidSel): 1
Remote control for filter unit: 1
Connection of the filter unit to the power distributor: 1
Power distributor for the system: 1
Integration of the plasma source into the CNC system HPR, HD, HT, HF, FF: 1
Drill head MG - 22, max. drill 22 mm, max. tap 16 mm 5,5 kW, Y-, Z-axis 1
Cooling - ecological cooling system for the drill 1
Clamping magazine with 6 tools ISO 40 for automatic tool change linear PMB6 1
Pipe cutting device RSV 100-500 HHP 1
Grid for duct cover 880 mm, 1 m length 6
Support rollers on rails RSV 100-500 HHP 2
Rails for support rollers 1 m with 2 rails 7
Chuck for square pipes up to 500 mm diameter, 4-back 1
Signal lamp 1
DFPRO 8; ART501/9 kW; 6000 m3/h [15-3x3.5-2 m - 1x] [15x1.5 m - 2x] 1
HPR260 Automatic 1
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2016 |
| Offers online | 5 |
| Last activity | Aug. 13, 2026 |
Description of the product
Number of cutting heads: 1
Number of drilling heads: 1
Table length: L [m] 6
Table width: Weight [m] 2
Channel width: WCH [m] 0.8
Cutting machine with cutting table and sectional extractor: 1
USB flash drive (USB 2.0): 1
Basic tool station type R (A, B axis for MG): 1
Remote diagnosis: 1
AsperWin - Basic module: 1
AsperWin - Enclosure module: 1
AsperWin - Phase milling module: 1
AsperWin - Pipe cutting module: 1
AsperWin - Chamfering module (SolidSel): 1
Remote control for filter unit: 1
Connection of the filter unit to the power distributor: 1
Power distributor for the system: 1
Integration of the plasma source into the CNC system HPR, HD, HT, HF, FF: 1
Drill head MG - 22, max. drill 22 mm, max. tap 16 mm 5,5 kW, Y-, Z-axis 1
Cooling - ecological cooling system for the drill 1
Clamping magazine with 6 tools ISO 40 for automatic tool change linear PMB6 1
Pipe cutting device RSV 100-500 HHP 1
Grid for duct cover 880 mm, 1 m length 6
Support rollers on rails RSV 100-500 HHP 2
Rails for support rollers 1 m with 2 rails 7
Chuck for square pipes up to 500 mm diameter, 4-back 1
Signal lamp 1
DFPRO 8; ART501/9 kW; 6000 m3/h [15-3x3.5-2 m - 1x] [15x1.5 m - 2x] 1
HPR260 Automatic 1
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
This listing features a Micro Step MG 6001.20 PRB+CH 800 P+HPR 260 cutting machine, manufactured in 2008. It is a large industrial CNC cutting system designed for plasma and gas cutting, with a total power of 9000 W. The machine is equipped with two cutting heads, enabling efficient processing of metal sheets. It supports metal sheets up to 6000 mm in length and 2000 mm in width.
The cutting table is painted in yellow and blue and includes a gantry and cutting heads. The system integrates a sectional extractor and an industrial dust collector unit labeled 'Donaldson Torit DCE,' which is included to manage dust and fumes during operation. The machine also includes metal rollers and guides to facilitate the feeding of material into the cutting area.
The CNC control panel features a touchscreen interface branded 'MicroStep,' although it shows signs of wear, including some tape and worn areas around the keyboard section. The machine's surfaces and components exhibit visible signs of use, such as dirt, scratches, and paint wear, but the overall structure appears intact.
Additional accessories include a gas regulator panel with gauges and control valves for Oxygen, Acetylene, and Propane gases, mounted on a white wall with connected hoses. Ventilation ducting and overhead lighting are present in the workshop environment where the machine is installed.
This cutting system comes with various software modules including AsperWin Basic, Enclosure, Phase Milling, Pipe Cutting, and Chamfering modules. It also features a drill head MG-22 capable of drilling up to 22 mm and tapping up to 16 mm, with an ecological cooling system for the drill. Automatic tool change is supported via a clamping magazine with six ISO 40 tools.
The machine is suitable for complex cutting tasks involving metal sheets and pipes, including pipe cutting with the RSV 100-500 HHP device and chamfering. Support rollers and rails are provided for handling square pipes up to 500 mm diameter. The system includes a signal lamp and remote controls for filter unit operation.
Overall, this Micro Step cutting machine is a comprehensive plasma and gas cutting solution with integrated CNC control, suitable for industrial metal fabrication environments. The equipment shows typical signs of use but maintains all major components and accessories as described.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2016 |
| Offers online | 5 |
| Last activity | Aug. 13, 2026 |
Машина за рязане - плазма / газ Micro Step MG 6001.20 PRB+CH 800 P+HPR 260
Řezačka plasmová / plynová Micro Step MG 6001.20 PRB+CH 800 P+HPR 260
Micro Step MG 6001.20 PRB+CH 800 P+HPR 260 Skæremaskine - Plasma/gas
Micro Step MG 6001.20 PRB+CH 800 P+HPR 260 Schneidemaschine - Plasma / gas
Κοπτική μηχανή - Plasma / gas Micro Step MG 6001.20 PRB+CH 800 P+HPR 260
Micro Step MG 6001.20 PRB+CH 800 P+HPR 260 Cutting machine - Plasma / gas
Máquina de corte por plasma / gas Micro Step MG 6001.20 PRB+CH 800 P+HPR 260
Machine de découpe plasma / gaz Micro Step MG 6001.20 PRB+CH 800 P+HPR 260
Stroj za rezanje - plazma / plin Micro Step MG 6001.20 PRB+CH 800 P+HPR 260
Micro Step MG 6001.20 PRB+CH 800 P+HPR 260 Vágógép - Plazma/gáz
Impianto taglio plasma/ossitaglio Micro Step MG 6001.20 PRB+CH 800 P+HPR 260
Pjovimo mašina - Plazminė/dujinė Micro Step MG 6001.20 PRB+CH 800 P+HPR 260
Micro Step MG 6001.20 PRB+CH 800 P+HPR 260 Snijmachine - Plasma/gas
Wycinarka plazmowa / gazowa Micro Step MG 6001.20 PRB+CH 800 P+HPR 260
Máquina de corte - Plasma / gás Micro Step MG 6001.20 PRB+CH 800 P+HPR 260
Mașină de tăiat - Plasmă/gaz Micro Step MG 6001.20 PRB+CH 800 P+HPR 260
Micro Step MG 6001.20 PRB+CH 800 P+HPR 260 Станок для резки плазма / газ
Mašina za sečenje - plazma / gas Micro Step MG 6001.20 PRB+CH 800 P+HPR 260
Micro Step MG 6001.20 PRB+CH 800 P+HPR 260 Skärmaskin - Plasma / gas
Kesim makinesi Micro Step MG 6001.20 PRB+CH 800 P+HPR 260
EN
- Languages
English (GB)