Contact us to receive an offer.
| Manufacturer | MGM |
|---|---|
| Model | linea per lamiere grecate 3 x 45 mm |
| Year | 1990 |
| Location | Italy
|
This roll-forming line is designed for producing roof trapezoidal steel profiles with a height of 45 mm. It is suitable for processing steel coils with a width of 1000 mm and thickness ranging from 0.30 to 0.50 mm. The line is manufactured in Italy and is intended for use with steel coils weighing up to 5 tons. It operates at a production speed of 10 meters per minute, allowing efficient continuous profile forming.
The equipment includes an idle and braked decoiler capable of handling coils up to 1000 mm in width and 5 tons in weight, ensuring smooth feeding of the steel coil into the roll-forming machine. The roll-forming machine itself features 11 forming stations, each equipped with shafts of 80 mm diameter. It is powered by a 7.5 kW alternating current motor that drives the machine via a side gear train transmission lubricated by grease, contributing to reliable operation. A flag stop control is integrated and adjustable to set the desired profile length.
An interchangeable set of tempered steel forming rolls is assembled on dedicated shafts to produce the trapezoidal profile with three ribs and a height of 45 mm. The line also includes a flying cut-off machine operated by a pneumatic cylinder, equipped with one interchangeable set of shaped blades for cutting profiles to length without stopping the production process.
The discharging bench allows for handling profiles up to a maximum length of 10,000 mm, facilitating downstream processing or stacking. The electrical system includes control boards to manage the line's operation. Additionally, a compressed air accumulating tank is part of the system; however, the air compressor is not included. CE safety barriers are also part of the setup but are excluded from the sale.
This roll-forming line is suitable for manufacturers looking to produce trapezoidal roofing profiles from steel coils within the specified dimensions and weight capacities.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
N.1 ROLL-FORMING LINE FOR ROOF TRAPEZOIDAL PROFILE H 45 MM
(from steel coil width 1000 x 0,30-0,50 mm, used line manufactured in Italy)
(Production speed 10 m/min, steel coils weight capacity 1000 mm x 5 Ton, max length of discharging bench 10000 mm).
The line is composed by:
n. 1 Idle and braked decoiler 1000 mm x 5 ton;
n. 1 Roll-forming machine with n. 11 forming stations (shafts diameters = 80 mm) drived by 7.5 kW a.c. motor with
side gears train transmission lubricated by grease. Flag stop control adjustable for profiles length.
n. 1 Interchangeable Set of forming rolls by tempered steel, assembled on dedicated set of shafts to produce trapezoidal
profile n.3 ribs x H 45 mm;
n. 1 Flying cut-off machine with n.1 interchangeable set of shaped blades, operated by pneumatic cylinder
n. 1 Dicharging bench for cutted to length profiles Lmax = 10000 mm
n. 1 Electrical system with control boards;
n.1 Compressed air accumulating tank (air compressor excluded)
CE Safety barriers (excluded)
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Factory – small or medium company |
| Active since | 2020 |
| Offers online | 3 |
| Last activity | Sept. 1, 2026 |
N.1 ROLL-FORMING LINE FOR ROOF TRAPEZOIDAL PROFILE H 45 MM
(from steel coil width 1000 x 0,30-0,50 mm, used line manufactured in Italy)
(Production speed 10 m/min, steel coils weight capacity 1000 mm x 5 Ton, max length of discharging bench 10000 mm).
The line is composed by:
n. 1 Idle and braked decoiler 1000 mm x 5 ton;
n. 1 Roll-forming machine with n. 11 forming stations (shafts diameters = 80 mm) drived by 7.5 kW a.c. motor with
side gears train transmission lubricated by grease. Flag stop control adjustable for profiles length.
n. 1 Interchangeable Set of forming rolls by tempered steel, assembled on dedicated set of shafts to produce trapezoidal
profile n.3 ribs x H 45 mm;
n. 1 Flying cut-off machine with n.1 interchangeable set of shaped blades, operated by pneumatic cylinder
n. 1 Dicharging bench for cutted to length profiles Lmax = 10000 mm
n. 1 Electrical system with control boards;
n.1 Compressed air accumulating tank (air compressor excluded)
CE Safety barriers (excluded)
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
This roll-forming line is designed for producing roof trapezoidal steel profiles with a height of 45 mm. It is suitable for processing steel coils with a width of 1000 mm and thickness ranging from 0.30 to 0.50 mm. The line is manufactured in Italy and is intended for use with steel coils weighing up to 5 tons. It operates at a production speed of 10 meters per minute, allowing efficient continuous profile forming.
The equipment includes an idle and braked decoiler capable of handling coils up to 1000 mm in width and 5 tons in weight, ensuring smooth feeding of the steel coil into the roll-forming machine. The roll-forming machine itself features 11 forming stations, each equipped with shafts of 80 mm diameter. It is powered by a 7.5 kW alternating current motor that drives the machine via a side gear train transmission lubricated by grease, contributing to reliable operation. A flag stop control is integrated and adjustable to set the desired profile length.
An interchangeable set of tempered steel forming rolls is assembled on dedicated shafts to produce the trapezoidal profile with three ribs and a height of 45 mm. The line also includes a flying cut-off machine operated by a pneumatic cylinder, equipped with one interchangeable set of shaped blades for cutting profiles to length without stopping the production process.
The discharging bench allows for handling profiles up to a maximum length of 10,000 mm, facilitating downstream processing or stacking. The electrical system includes control boards to manage the line's operation. Additionally, a compressed air accumulating tank is part of the system; however, the air compressor is not included. CE safety barriers are also part of the setup but are excluded from the sale.
This roll-forming line is suitable for manufacturers looking to produce trapezoidal roofing profiles from steel coils within the specified dimensions and weight capacities.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2020 |
| Offers online | 3 |
| Last activity | Sept. 1, 2026 |
N.1 Линия за валцоване за производство на стоманени гофрирани профили 76 x 18 mm
N.1 válcovací linka na výrobu ocelových vlnitých profilů 76 x 18 mm
N.1 rulleformningslinje til produktion af bølgeprofiler af stål 76 x 18 mm
N.1 Walzprofilieranlage zur Herstellung von Stahlwellprofilen 76 x 18 mm
N.1 γραμμή διαμόρφωσης ρολού για την παραγωγή χαλύβδινου κυματοειδούς προφίλ 76 x 18 mm
N.1 roll-forming line for roof trapezoidal profile h 45 mm
Línea de perfilado N.1 para producir perfil corrugado de acero de 76 x 18 mm
Ligne de profilage N.1 pour la production de profilés ondulés en acier 76 x 18 mm
N.1 linija za valjanje za proizvodnju čeličnog valovitog profila 76 x 18 mm
N.1 tekercselősor 76 x 18 mm-es hullámos acélprofil gyártására
N.1 linea di profilatura per la produzione di PROFILATI GRECATI
N.1 ritininio formavimo linija plieniniam gofruotam profiliui 76 x 18 mm gaminti
N.1 rolvormlijn voor de productie van stalen golfprofiel 76 x 18 mm
Linia do formowania rolkowego N.1 do produkcji stalowych profili falistych 76 x 18 mm
Linha de perfilagem N.1 para produção de perfil ondulado de aço 76 x 18 mm
Linie de laminare N.1 pentru producerea profilului ondulat din oțel 76 x 18 mm
N.1 рулоноформовочная линия для производства стального гофрированного профиля 76 x 18 мм
N.1 linija za oblikovanje valjaka za proizvodnju čeličnog valovitog profila 76 k 18 mm
N.1 rullformningslinje för tillverkning av korrugerad stålprofil 76 x 18 mm
76 x 18 mm çelik oluklu profil üretmek için N.1 rulo şekillendirme hattı
EN
- Languages
English (GB)