Contact us to receive an offer.
| Manufacturer | MG |
|---|---|
| Model | 340 |
| Year | 1997 |
| Location | Italy
|
Hydraulic three-roll plate bending machine, described as a planetary-design pyramid machine with dual pre-pinching. The listed model designation is 3000 × 40 mm, and the machine is stated to be from 1997.
**Capacity and roll dimensions**
- Plate width: 3,000 mm
- Rolling thickness: 40 mm
- Pre-bending thickness: 30 mm
- Minimum rolling inside diameter: 550 mm, depending on plate thickness and width
- Useful roll length: 3,100 mm
- Top roll diameter: 450 mm
- Side roll diameter: 410 mm
The machine is described as having hydraulic control of the central upper support, which holds formed plate during large-diameter rolling. Hydraulic side arms support large-diameter workpieces. A conical bending attachment has hydraulic angle adjustment for cone rolling, and a hardened cone-bending stopper pad swings down at the drop end.
The three rolls are described as induction hardened. All three rolls are power driven, with an axial gearbox and a direct-drive hydraulic motor for each roll. The machine includes a wheeled electrical control console with centralized controls, joysticks and digital readouts for bending and pre-bending roll positions. A re-rolling system is specified for rounding welded shells.
A hydraulic front-side drop end opens to unload closed shells. Working-roll rotation is hydraulically controlled, with fast and slow speed settings. The stated electrical supply is three-phase; the voltage value is not specified in the supplied description. Listed electrical power is 40 hp.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Plate bending machine 3 ROLL HYDRAULIC MODEL 3000 X 40 MM - YEAR 1997
PLATE BENDING ROLL PLANETARY DESIGN PYRAMID DUAL PRE-PINCH
Nameplate Bending capacity
-Plate width : 3000 mm
-Rolling plate thickness: 40 mm
-Prebend thickness: 30 mm
---
minimum rolling ID 550 mm depending on plate thickness and width
Rolls dimensions: -Useful length 3100 mm
-top roll D 450 mm
-side rolls D 410 mm
Accessories installed:
Central upper support hydraulic control to hold the plate formed into large diameters
Side arm hydraulic to support the large diameter being formed
Conical bending attachment with hydraulic control of the angle setting for cone rolling,
cone bending stopper hardened pad swing-down on the drop-end of the machine.
Technical data
Rolls hardening induction treatment, high strength surface of the 3 rolls
Power driven total on the 3 rolls with axial gearbox and direct drive hydro-motor each roll
Console electric on wheels with centralized commands joysticks and digital readout.
Digital readouts of the rolls position bending and pre-bending.
Re-rolling system for welded shells rounding.
Opening front side hydraulic drop-end to unload the closed shell.
Variable speed working roll bending rotation hydraulic speed fast/slow.
Voltage supply 3 phase Vac, electric power 40 Hp.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2014 |
| Offers online | 21 |
| Last activity | Nov. 11, 2026 |
Plate bending machine 3 ROLL HYDRAULIC MODEL 3000 X 40 MM - YEAR 1997
PLATE BENDING ROLL PLANETARY DESIGN PYRAMID DUAL PRE-PINCH
Nameplate Bending capacity
-Plate width : 3000 mm
-Rolling plate thickness: 40 mm
-Prebend thickness: 30 mm
---
minimum rolling ID 550 mm depending on plate thickness and width
Rolls dimensions: -Useful length 3100 mm
-top roll D 450 mm
-side rolls D 410 mm
Accessories installed:
Central upper support hydraulic control to hold the plate formed into large diameters
Side arm hydraulic to support the large diameter being formed
Conical bending attachment with hydraulic control of the angle setting for cone rolling,
cone bending stopper hardened pad swing-down on the drop-end of the machine.
Technical data
Rolls hardening induction treatment, high strength surface of the 3 rolls
Power driven total on the 3 rolls with axial gearbox and direct drive hydro-motor each roll
Console electric on wheels with centralized commands joysticks and digital readout.
Digital readouts of the rolls position bending and pre-bending.
Re-rolling system for welded shells rounding.
Opening front side hydraulic drop-end to unload the closed shell.
Variable speed working roll bending rotation hydraulic speed fast/slow.
Voltage supply 3 phase Vac, electric power 40 Hp.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Hydraulic three-roll plate bending machine, described as a planetary-design pyramid machine with dual pre-pinching. The listed model designation is 3000 × 40 mm, and the machine is stated to be from 1997.
**Capacity and roll dimensions**
- Plate width: 3,000 mm
- Rolling thickness: 40 mm
- Pre-bending thickness: 30 mm
- Minimum rolling inside diameter: 550 mm, depending on plate thickness and width
- Useful roll length: 3,100 mm
- Top roll diameter: 450 mm
- Side roll diameter: 410 mm
The machine is described as having hydraulic control of the central upper support, which holds formed plate during large-diameter rolling. Hydraulic side arms support large-diameter workpieces. A conical bending attachment has hydraulic angle adjustment for cone rolling, and a hardened cone-bending stopper pad swings down at the drop end.
The three rolls are described as induction hardened. All three rolls are power driven, with an axial gearbox and a direct-drive hydraulic motor for each roll. The machine includes a wheeled electrical control console with centralized controls, joysticks and digital readouts for bending and pre-bending roll positions. A re-rolling system is specified for rounding welded shells.
A hydraulic front-side drop end opens to unload closed shells. Working-roll rotation is hydraulically controlled, with fast and slow speed settings. The stated electrical supply is three-phase; the voltage value is not specified in the supplied description. Listed electrical power is 40 hp.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2014 |
| Offers online | 21 |
| Last activity | Nov. 11, 2026 |
Четиривалова машина за огъване на листов материал MG 340
Čtyřválcová zakružovačka plechu MG 340
MG 340 4-valset pladevalsemaskine
MG 340 4-Walzen-Blechbiegemaschine
Κυλινδρομηχανή λαμαρίνας 4 κυλίνδρων MG 340
MG 340 4-roll plate rolling machine
Cilindros curvadores de chapa de 4 rodillos MG 340
Rouleuse de tôle à 4 rouleaux MG 340
Četverovaljni valjak za savijanje lima MG 340
MG 340 Négyhengeres lemezhengerítő gép
Calandra per lamiera a 4 rulli MG 340
MG 340 4 velenų skardos valcavimo staklė
MG 340 4-rollen plaatwalsmachine
Walcarka do blachy 4-walcowa MG 340
Calandra de chapa de 4 rolos MG 340
Mașină de rulat tablă cu 4 role MG 340
MG 340 Четырёхвалковая листогибочная машина
Četvorovaljni valjak za savijanje lima MG 340
MG 340 4-vals plåtvalsmaskin
4 toplu silindir büküm makinesi MG 340
EN
- Languages
English (GB)