Contact us to receive an offer.
| Manufacturer | Mazak |
|---|---|
| Model | VCN 410A-II |
| Year | 2009 |
| Location | Denmark
|
This listing features a Mazak VCN 410A-II vertical machining center, manufactured in 2009. The machine has a compact footprint with dimensions of 2600 mm in length, 2000 mm in width, and 2800 mm in height, weighing approximately 5010 kg. It offers a machining table size of 900 x 410 mm equipped with T-slots, facilitating versatile workpiece mounting.
The machine provides substantial travel capabilities with 560 mm longitudinal (X-axis), 410 mm cross (Y-axis), and 510 mm vertical (Z-axis) movements. It is equipped with a CAT 40 spindle taper and a spindle motor rated at 11/7.5 kW, capable of reaching stepless spindle speeds up to 12,000 rpm. The tool changer has 30 positions, supporting efficient tool management for complex machining tasks.
The control system is the Mazatrol Matrix Nexus, featuring a full keyboard, screen, and various control switches and buttons, all in good condition. The machining area is enclosed with doors that can be partially opened for access. Inside, coolant nozzles are installed, and the machine supports coolant through the spindle at 15 bar pressure. A chip conveyor and chip bin are attached to the left side, aiding in chip removal during operation.
The machine's exterior is clean with minor signs of use and wear, while the interior walls show some wear and coolant stains, typical for a machine of this age. The back side reveals hydraulic and lubrication system components with hoses and cables, as well as a cooling unit or hydraulic pump motor. Overall, this Mazak VCN 410A-II is a well-equipped vertical machining center suitable for various machining applications.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Specifications:
Table Size 900 x 410 mm
Longitudinal travel (X) 560 mm
Cross travel (Y) 410 mm
Vertical travel (Z) 510 mm
Spindle taper CAT 40
Stepless spindle speeds 12000 rpm
Spindle motor 11/7.5 Kw
Toolchanger ATC 30 pos.
Control system Mazak Matrix manuf.
Controlled in axis 3
Spindel Running time 7746 Hours
Accessories:
Coolant through Spindel 15 bar
Chip conveyor.
Werkzeug abmessen
Length: 2600 mm, Height: 2800 mm, Width: 2000 mm, Weight: 5010 KG
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 90 |
| Last activity | Nov. 6, 2026 |
Specifications:
Table Size 900 x 410 mm
Longitudinal travel (X) 560 mm
Cross travel (Y) 410 mm
Vertical travel (Z) 510 mm
Spindle taper CAT 40
Stepless spindle speeds 12000 rpm
Spindle motor 11/7.5 Kw
Toolchanger ATC 30 pos.
Control system Mazak Matrix manuf.
Controlled in axis 3
Spindel Running time 7746 Hours
Accessories:
Coolant through Spindel 15 bar
Chip conveyor.
Werkzeug abmessen
Length: 2600 mm, Height: 2800 mm, Width: 2000 mm, Weight: 5010 KG
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
This listing features a Mazak VCN 410A-II vertical machining center, manufactured in 2009. The machine has a compact footprint with dimensions of 2600 mm in length, 2000 mm in width, and 2800 mm in height, weighing approximately 5010 kg. It offers a machining table size of 900 x 410 mm equipped with T-slots, facilitating versatile workpiece mounting.
The machine provides substantial travel capabilities with 560 mm longitudinal (X-axis), 410 mm cross (Y-axis), and 510 mm vertical (Z-axis) movements. It is equipped with a CAT 40 spindle taper and a spindle motor rated at 11/7.5 kW, capable of reaching stepless spindle speeds up to 12,000 rpm. The tool changer has 30 positions, supporting efficient tool management for complex machining tasks.
The control system is the Mazatrol Matrix Nexus, featuring a full keyboard, screen, and various control switches and buttons, all in good condition. The machining area is enclosed with doors that can be partially opened for access. Inside, coolant nozzles are installed, and the machine supports coolant through the spindle at 15 bar pressure. A chip conveyor and chip bin are attached to the left side, aiding in chip removal during operation.
The machine's exterior is clean with minor signs of use and wear, while the interior walls show some wear and coolant stains, typical for a machine of this age. The back side reveals hydraulic and lubrication system components with hoses and cables, as well as a cooling unit or hydraulic pump motor. Overall, this Mazak VCN 410A-II is a well-equipped vertical machining center suitable for various machining applications.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 90 |
| Last activity | Nov. 6, 2026 |
Вертикален обработващ център Mazak VCN 410A-II
Vertikální obráběcí centrum Mazak VCN 410A-II
Mazak VCN 410A-II Lodret bearbejdningscenter
Mazak VCN 410A-II Vertikales Bearbeitungszentrum
Κάθετο κέντρο κατεργασίας Mazak VCN 410A-II
Mazak VCN 410A-II Vertical machining center
Centro de mecanizado vertical Mazak VCN 410A-II
Centre d'usinage vertical Mazak VCN 410A-II
Vertikalni obradni centar Mazak VCN 410A-II
Mazak VCN 410A-II Függőleges megmunkáló központ
Centro di lavoro verticale Mazak VCN 410A-II
Vertikalus apdirbimo centras Mazak VCN 410A-II
Mazak VCN 410A-II Verticaal bewerkingscentrum
Pionowe centrum obróbcze Mazak VCN 410A-II
Centro de maquinação vertical Mazak VCN 410A-II
Centru de prelucrare vertical Mazak VCN 410A-II
Mazak VCN 410A-II Вертикальный обрабатывающий центр
Vertikalni obradni centar Mazak VCN 410A-II
Mazak VCN 410A-II Vertikalt bearbetningscenter
Dikey işleme merkezi Mazak VCN 410A-II
EN
- Languages
English (GB)