Contact us to receive an offer.
| Manufacturer | Mazak |
|---|---|
| Model | NEXUS 510C |
| Year | 2005 |
| Location | Switzerland
|
This Mazak Nexus 510C vertical machining center, manufactured in 2005, is equipped with a Mazatrol 640M NEXUS controller and features a 3-axis configuration. The machine has two tables, each measuring 1300 mm in length and 550 mm in width, with 5 T-slots spaced 100 mm apart and 18 mm in width. The tables can support a maximum load of 1200 kg, suitable for a variety of heavy machining tasks.
The machine offers a longitudinal stroke (X-axis) of 1050 mm, cross travel (Y-axis) of 510 mm, and vertical stroke (Z-axis) of 510 mm. It includes a 30-position tool changer capable of handling tools up to 80 mm in diameter, with a maximum diameter of 125 mm when adjacent positions are free, and tool lengths up to 350 mm. The maximum tool weight is 8 kg, and the average chip-to-chip time is 2.9 seconds.
The spindle features an ISO 40 taper with a maximum speed of 12,000 rpm and a spindle motor power of 18.5 kW. The distance between the spindle nose and the table ranges from 150 to 660 mm. Feed rates range from 1 to 8,000 mm/min, with rapid traverse speeds up to 36 m/min.
Additional features include a linear ruler system on all axes, coolant through the spindle at 15 bar pressure, a 250-liter watering device, a Renishaw measuring probe, tool breakage control, chip evacuator, 2-place pallet changer, oil mist extraction, tool measuring device, synchronized tapping, and PCMCIA card interface. The machine operates on a 3-phase 400 Volt, 50 Hz power supply with a total installed power of 32 kVA and requires a 5 bar compressed air connection.
The machining area is enclosed with windows, providing visibility while maintaining safety. The control panel, located on the front center, includes a screen, keypad, emergency stop buttons, and key switches. The machine and its components, including the T-slot table with a mounted vise, spindle head, and tool carousel, show minor signs of use but are generally clean and well-maintained. A blue coiled air hose is also present at the front of the machine.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Controller:
MAZATROL 640M NEXUS
Total number of axes
3
Number of Tables
2
table length
1300mm
table width
550mm
Number of T-slots
5
Distance between T-slots
100mm
T-slot width
18mm
Load allowed on the table max.
1200kg
Longitudinal stroke (X-axis)
1050mm
Cross travel (Y)
510mm
Vertical stroke (Z-axis)
510mm
Tool changer:
Number of positions
30
Tool diameter max.
80mm
diameter max. with free places
125mm
tool length max.
350mm
Tool weight max.
8kg
Average chip-to-chip time
2.9 seconds
Spindle taper: ISO
40
Distance between spindle nose and table
150 - 660mm
Spindle speed:
Dimmer (stepless adjustment)
of
35 rpm
has
12000 rpm
Feed rate
1 - 8000mm/min
Fast forwards:
36m/min
Compressed air connection
5 bar
Connection 50 Hz 3x
400 Volt
spindle power
18.5 / 7.5kW
Total power installed
32 kVA
Machine weight approx.
6900kg
Machine dimensions:
Length
2880mm
Width
2835mm
Height
2783mm
Miscellaneous accessories:
Linear ruler system (X, Y, Z axes)
Tool holder set
Watering device
250 liters
Coolant through the center of the spindle
15 bar
Renishaw measuring probe
Tool breakage control
Chip evacuator
2-place pallet changer
Lamp
Oil mist extraction
Tool measuring device
Auto power off
PCMCIA card interface
Synchronized tapping
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
What year was this Mazak NEXUS 510C manufactured?
This Mazak NEXUS 510C machining center was manufactured in 2005.
Is the machine in good working condition?
This Mazak NEXUS 510C machining center is in good working condition.
How many operating hours does this machining center have?
This Mazak NEXUS 510C machining center has 22,789 operating hours.
Can this machining center be inspected via video?
This Mazak NEXUS 510C machining center is available for inspection via video.
What type of machine is this Mazak NEXUS 510C?
This Mazak NEXUS 510C is a vertical machining center.
When was this equipment manufactured?
This equipment was manufactured in 2005.
What type of machine is this Mazak NEXUS 510C?
This Mazak NEXUS 510C is a vertical machining center.
When was this equipment manufactured?
This equipment was manufactured in 2005.
What type of machine is this Mazak NEXUS 510C?
This Mazak NEXUS 510C is a vertical machining center.
When was this equipment manufactured?
This equipment was manufactured in 2005.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2014 |
| Offers online | 256 |
| Last activity | Oct. 29, 2026 |
Controller:
MAZATROL 640M NEXUS
Total number of axes
3
Number of Tables
2
table length
1300mm
table width
550mm
Number of T-slots
5
Distance between T-slots
100mm
T-slot width
18mm
Load allowed on the table max.
1200kg
Longitudinal stroke (X-axis)
1050mm
Cross travel (Y)
510mm
Vertical stroke (Z-axis)
510mm
Tool changer:
Number of positions
30
Tool diameter max.
80mm
diameter max. with free places
125mm
tool length max.
350mm
Tool weight max.
8kg
Average chip-to-chip time
2.9 seconds
Spindle taper: ISO
40
Distance between spindle nose and table
150 - 660mm
Spindle speed:
Dimmer (stepless adjustment)
of
35 rpm
has
12000 rpm
Feed rate
1 - 8000mm/min
Fast forwards:
36m/min
Compressed air connection
5 bar
Connection 50 Hz 3x
400 Volt
spindle power
18.5 / 7.5kW
Total power installed
32 kVA
Machine weight approx.
6900kg
Machine dimensions:
Length
2880mm
Width
2835mm
Height
2783mm
Miscellaneous accessories:
Linear ruler system (X, Y, Z axes)
Tool holder set
Watering device
250 liters
Coolant through the center of the spindle
15 bar
Renishaw measuring probe
Tool breakage control
Chip evacuator
2-place pallet changer
Lamp
Oil mist extraction
Tool measuring device
Auto power off
PCMCIA card interface
Synchronized tapping
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
What year was this Mazak NEXUS 510C manufactured?
This Mazak NEXUS 510C machining center was manufactured in 2005.
Is the machine in good working condition?
This Mazak NEXUS 510C machining center is in good working condition.
How many operating hours does this machining center have?
This Mazak NEXUS 510C machining center has 22,789 operating hours.
Can this machining center be inspected via video?
This Mazak NEXUS 510C machining center is available for inspection via video.
What type of machine is this Mazak NEXUS 510C?
This Mazak NEXUS 510C is a vertical machining center.
When was this equipment manufactured?
This equipment was manufactured in 2005.
What type of machine is this Mazak NEXUS 510C?
This Mazak NEXUS 510C is a vertical machining center.
When was this equipment manufactured?
This equipment was manufactured in 2005.
What type of machine is this Mazak NEXUS 510C?
This Mazak NEXUS 510C is a vertical machining center.
When was this equipment manufactured?
This equipment was manufactured in 2005.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
This Mazak Nexus 510C vertical machining center, manufactured in 2005, is equipped with a Mazatrol 640M NEXUS controller and features a 3-axis configuration. The machine has two tables, each measuring 1300 mm in length and 550 mm in width, with 5 T-slots spaced 100 mm apart and 18 mm in width. The tables can support a maximum load of 1200 kg, suitable for a variety of heavy machining tasks.
The machine offers a longitudinal stroke (X-axis) of 1050 mm, cross travel (Y-axis) of 510 mm, and vertical stroke (Z-axis) of 510 mm. It includes a 30-position tool changer capable of handling tools up to 80 mm in diameter, with a maximum diameter of 125 mm when adjacent positions are free, and tool lengths up to 350 mm. The maximum tool weight is 8 kg, and the average chip-to-chip time is 2.9 seconds.
The spindle features an ISO 40 taper with a maximum speed of 12,000 rpm and a spindle motor power of 18.5 kW. The distance between the spindle nose and the table ranges from 150 to 660 mm. Feed rates range from 1 to 8,000 mm/min, with rapid traverse speeds up to 36 m/min.
Additional features include a linear ruler system on all axes, coolant through the spindle at 15 bar pressure, a 250-liter watering device, a Renishaw measuring probe, tool breakage control, chip evacuator, 2-place pallet changer, oil mist extraction, tool measuring device, synchronized tapping, and PCMCIA card interface. The machine operates on a 3-phase 400 Volt, 50 Hz power supply with a total installed power of 32 kVA and requires a 5 bar compressed air connection.
The machining area is enclosed with windows, providing visibility while maintaining safety. The control panel, located on the front center, includes a screen, keypad, emergency stop buttons, and key switches. The machine and its components, including the T-slot table with a mounted vise, spindle head, and tool carousel, show minor signs of use but are generally clean and well-maintained. A blue coiled air hose is also present at the front of the machine.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2014 |
| Offers online | 256 |
| Last activity | Oct. 29, 2026 |
Mazak NEXUS 510C
Obráběcí centrum - vertikální Mazak NEXUS 510C
Mazak NEXUS 510C
Mazak NEXUS 510C Bearbeitungszentrum Vertikal
Mazak NEXUS 510C
Mazak NEXUS 510C Machining center - vertical
Centro de mecanizado vertical Mazak NEXUS 510C
Centre d'usinage vertical Mazak NEXUS 510C
Mazak NEXUS 510C
Mazak NEXUS 510C
Centro di lavoro verticale Mazak NEXUS 510C
Mazak NEXUS 510C
Mazak NEXUS 510C
Pionowe centrum obróbcze Mazak NEXUS 510C
Mazak NEXUS 510C
Mazak NEXUS 510C
Mazak NEXUS 510C Вертикальный обрабатывающий центр
Mazak NEXUS 510C
Mazak NEXUS 510C
Dikey işleme merkezi Mazak NEXUS 510C
EN
- Languages
English (GB)