| Manufacturer | Mazak |
|---|---|
| Model | Nexus 510C-II |
| Year | 2008 |
| Location | Germany
|
Machine type: Vertical machining center with 3 axes (X/Y/Z).
Control and interface:
- Control Brand/Model: MAZATROL Matrix Nexus.
- Additional control feature: Mazak Voice Adviser.
Table and travel:
- Table dimensions: 1300 x 550 mm.
- Maximum table load: 1200 kg.
- Table length: 1300 mm; table width: 550 mm.
- Axis travel (X / Y / Z): 1050 / 510 / 510 mm.
Spindle and tooling:
- Spindle speed: up to 12,000 RPM.
- Spindle taper: SK 40 / BT 40.
- Spindle service: Spindle was completely renewed in September 2025 by Mazak factory service using an original replacement spindle cartridge (high-precision version). Documented cartridge specifications: clamping force 10.1 kN; runout 0.002–0.005 mm.
- Tool magazine capacity: 30 stations.
- Tool changer: double gripper changer.
Performance and motion:
- Rapid traverse rate: up to 42 m/min.
Operating history (logged times):
- Total power-on time: 46,722 hours (as of 07.07.2026).
- Automatic operation time: 17,776 hours.
- Cutting time: 15,817 hours.
- Pure cutting time: 13,169 hours.
Electrical and mechanical data:
- Approximate machine weight: 6,920 kg.
- Power supply: 3AC 380 V, 50/60 Hz, approx. 33.8 kVA.
- Control circuit voltages: AC 100 V and DC 24 V.
- Main motor: max. 47 A, 400 V.
Notes and condition:
- Condition details and any additional accessories are not provided in the current listing. No visible components or accessories are described separately.
- No statements about functionality, testing, refurbishment status, or warranty are included in this description.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Control Brand: MAZATROL
Control Model: Matrix Nexus
Dimensions
Machine Weight: 6920 kg
Table Length: 1300 mm
Table Load: 1200 kg
Table Width: 550 mm
Movement
Number of Axes: 3
X-axis Travel: 1050 mm
Y-axis Travel: 510 mm
Z-axis Travel: 510 mm
Technical Specification
Spindle Speed: 12000 RPM
Taper Size: SK 40
Tool Stations: 30
Additional Information
- Control System: Mazatrol Matrix Nexus (with Mazak Voice Adviser)
- Axis Travel X/Y/Z: 1050 / 510 / 510 mm
- Table Dimensions: 1300 x 550 mm
- Maximum Table Load: 1200 kg
- Spindle Speed: Up to 12000 rpm
- Spindle Details: Completely renewed in September 2025 by Mazak factory service (original replacement spindle cartridge, high-precision version, clamping force 10.1 kN, runout 0.002-0.005 mm)
- Tool Taper: SK 40 / BT 40
- Tool Magazine Capacity: 30 stations
- Tool Changer Type: Double gripper changer
- Rapid Traverse Rate: Up to 42 m/min
- Total Power-On Time: 46722 hours (as of 07.07.2026)
- Automatic Operation Time: 17776 hours
- Cutting Time: 15817 hours
- Pure Cutting Time: 13169 hours
- Weight: Approx. 6920 kg
- Power Supply: 3AC 380 V, 50/60 Hz, approx. 33.8 kVA
- Control Circuit: AC100V, DC24V
- Main Motor: Max. 47 A, 400 V
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2090 |
| Last activity | Oct. 29, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
Control Brand: MAZATROL
Control Model: Matrix Nexus
Dimensions
Machine Weight: 6920 kg
Table Length: 1300 mm
Table Load: 1200 kg
Table Width: 550 mm
Movement
Number of Axes: 3
X-axis Travel: 1050 mm
Y-axis Travel: 510 mm
Z-axis Travel: 510 mm
Technical Specification
Spindle Speed: 12000 RPM
Taper Size: SK 40
Tool Stations: 30
Additional Information
- Control System: Mazatrol Matrix Nexus (with Mazak Voice Adviser)
- Axis Travel X/Y/Z: 1050 / 510 / 510 mm
- Table Dimensions: 1300 x 550 mm
- Maximum Table Load: 1200 kg
- Spindle Speed: Up to 12000 rpm
- Spindle Details: Completely renewed in September 2025 by Mazak factory service (original replacement spindle cartridge, high-precision version, clamping force 10.1 kN, runout 0.002-0.005 mm)
- Tool Taper: SK 40 / BT 40
- Tool Magazine Capacity: 30 stations
- Tool Changer Type: Double gripper changer
- Rapid Traverse Rate: Up to 42 m/min
- Total Power-On Time: 46722 hours (as of 07.07.2026)
- Automatic Operation Time: 17776 hours
- Cutting Time: 15817 hours
- Pure Cutting Time: 13169 hours
- Weight: Approx. 6920 kg
- Power Supply: 3AC 380 V, 50/60 Hz, approx. 33.8 kVA
- Control Circuit: AC100V, DC24V
- Main Motor: Max. 47 A, 400 V
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Machine type: Vertical machining center with 3 axes (X/Y/Z).
Control and interface:
- Control Brand/Model: MAZATROL Matrix Nexus.
- Additional control feature: Mazak Voice Adviser.
Table and travel:
- Table dimensions: 1300 x 550 mm.
- Maximum table load: 1200 kg.
- Table length: 1300 mm; table width: 550 mm.
- Axis travel (X / Y / Z): 1050 / 510 / 510 mm.
Spindle and tooling:
- Spindle speed: up to 12,000 RPM.
- Spindle taper: SK 40 / BT 40.
- Spindle service: Spindle was completely renewed in September 2025 by Mazak factory service using an original replacement spindle cartridge (high-precision version). Documented cartridge specifications: clamping force 10.1 kN; runout 0.002–0.005 mm.
- Tool magazine capacity: 30 stations.
- Tool changer: double gripper changer.
Performance and motion:
- Rapid traverse rate: up to 42 m/min.
Operating history (logged times):
- Total power-on time: 46,722 hours (as of 07.07.2026).
- Automatic operation time: 17,776 hours.
- Cutting time: 15,817 hours.
- Pure cutting time: 13,169 hours.
Electrical and mechanical data:
- Approximate machine weight: 6,920 kg.
- Power supply: 3AC 380 V, 50/60 Hz, approx. 33.8 kVA.
- Control circuit voltages: AC 100 V and DC 24 V.
- Main motor: max. 47 A, 400 V.
Notes and condition:
- Condition details and any additional accessories are not provided in the current listing. No visible components or accessories are described separately.
- No statements about functionality, testing, refurbishment status, or warranty are included in this description.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2090 |
| Last activity | Oct. 29, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
Вертикален обработващ център Mazak Nexus 510C-II
Vertikální obráběcí centrum Mazak Nexus 510C-II
Mazak Nexus 510C-II Lodret bearbejdningscenter
Mazak Nexus 510C-II Vertikales Bearbeitungszentrum
Κάθετο κέντρο κατεργασίας Mazak Nexus 510C-II
Mazak Nexus 510C-II Vertical machining center
Centro de mecanizado vertical Mazak Nexus 510C-II
Centre d'usinage vertical Mazak Nexus 510C-II
Vertikalni obradni centar Mazak Nexus 510C-II
Mazak Nexus 510C-II Függőleges megmunkáló központ
Centro di lavoro verticale Mazak Nexus 510C-II
Mazak Nexus 510C-II Vertikalus apdirbimo centras
Mazak Nexus 510C-II Verticaal bewerkingscentrum
Pionowe centrum obróbcze Mazak Nexus 510C-II
Centro de usinagem vertical Mazak Nexus 510C-II
Centru de prelucrare vertical Mazak Nexus 510C-II
Mazak Nexus 510C-II Вертикальный обрабатывающий центр
Vertikalni obradni centar Mazak Nexus 510C-II
Mazak Nexus 510C-II Vertikalt bearbetningscenter
Dikey işleme merkezi Mazak Nexus 510C-II
EN
- Languages
English (GB)