Contact us to receive an offer.
| Manufacturer | Maplan |
|---|---|
| Model | MHF 400/200 |
| Year | 2013 |
| Location | Turkey
|
| Category | Injection moulding machines |
| Clamping force | 200 T |
| Tie bar spacing (H) | 520 mm |
| Tie bar spacing (V) | 520 mm |
| Shot volume | 400 cm³ |
| Robot interface | |
| Mould size | |
| worked hours | 18000 hours |
| hours under power | |
| state | excellent |
| At local norms | --------- |
| status | |
| Last availability date | 30/09/2026 |
| Product id | P71118016 |
| Language |
Maplan MHF 400/200
Vstřikolis Maplan MHF 400/200
Maplan MHF 400/200
Maplan MHF 400/200 Spritzgießmaschine
Maplan MHF 400/200
Maplan MHF 400/200 Rubber Injection moulding machine
Inyectora de plástico Maplan MHF 400/200
Presse à injecter Maplan MHF 400/200
Maplan MHF 400/200
Maplan MHF 400/200
Pressa ad iniezione Maplan MHF 400/200
Maplan MHF 400/200
Maplan MHF 400/200
Wtryskarka Maplan MHF 400/200
Maplan MHF 400/200
Maplan MHF 400/200
Maplan MHF 400/200 Термопластавтомат
Maplan MHF 400/200
Maplan MHF 400/200
Kauçuk enjeksiyon kalıplama makinesi Maplan MHF 400/200
|
This Maplan MHF 400/200 rubber injection moulding machine features a horizontal 4-column design with a full hydraulic clamping system. It has a clamping force of 200 tons (1979 kN) and a shot volume of 400 cm³. The tie bar spacing measures 520 mm both horizontally and vertically, providing a compact yet sturdy frame for mould installation.
The machine includes a control panel equipped with a screen and buttons located on the right side, allowing for operational control and monitoring. Hydraulic and pneumatic piping and valves are housed inside a panel, with two pressure gauges visible on the right side, indicating precise pressure management during operation. The clamping unit consists of large metal cylinders and mold plates, supported by hydraulic cylinders and other mechanical components. Some oil or grease is visible on parts of the hydraulic cylinders, which is common in machines of this type.
The heating platen dimensions are approximately 510 mm by 510 mm, with a maximum operating temperature of 210 °C and a heating power of 10.4 kW. The hydraulic system operates at a pressure of 280 bar, with an oil tank capacity of about 190 liters. The motor capacity is 7.5 kW with a flow rate of approximately 39 liters per minute. The machine's total connected electrical load is around 20 kW, requiring a power supply of 3 x 400 V at 50 Hz, with a control voltage of 24 V.
The machine's dimensions are roughly 3650 mm in width, 1085 mm in depth, and 2240 mm in height, with an approximate weight of 5300 kg. It is situated in an industrial environment, as indicated by the overhead lighting and piping. A metal bin is placed on the floor beneath the machine, likely for operational convenience or waste collection.
This unit was manufactured in 2013 and is designed for rubber injection molding processes, suitable for various production needs requiring precise clamping and injection capabilities.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Horizontal 4 column design full hydraulic clamping system
Rubber Injection moulding machine
A machine that used very little.very clean .There is no problem in the machine.The machine has a brush....
Clamping force : 1979 KN
Injection volume : 1500-3500 mm
Heating plate dimension : 710 x 800
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
What is the clamping force of this Maplan MHF 400/200?
This Maplan MHF 400/200 Rubber Injection moulding machine has a clamping force of 400 tons.
What is the heating platen size of the machine?
This machine features a heating platen size of 710 mm x 800 mm.
What is the injection volume range of this Maplan MHF 400/200?
This Maplan MHF 400/200 has an injection volume ranging from 1500 to 3500 cm3.
How many working hours does the machine have?
The machine has a total of 18,000 working hours.
How many tooling sets are included with this equipment?
This equipment includes two unused tooling sets as part of the included equipment.
Is this Maplan MHF 400/200 in good working condition?
This Maplan MHF 400/200 is in good working condition and can be seen in Istanbul.
When was the machine manufactured?
The machine was manufactured in 2013.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2017 |
| Offers online | 1 |
| Last activity | Oct. 16, 2026 |
Horizontal 4 column design full hydraulic clamping system
Rubber Injection moulding machine
A machine that used very little.very clean .There is no problem in the machine.The machine has a brush....
Clamping force : 1979 KN
Injection volume : 1500-3500 mm
Heating plate dimension : 710 x 800
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
What is the clamping force of this Maplan MHF 400/200?
This Maplan MHF 400/200 Rubber Injection moulding machine has a clamping force of 400 tons.
What is the heating platen size of the machine?
This machine features a heating platen size of 710 mm x 800 mm.
What is the injection volume range of this Maplan MHF 400/200?
This Maplan MHF 400/200 has an injection volume ranging from 1500 to 3500 cm3.
How many working hours does the machine have?
The machine has a total of 18,000 working hours.
How many tooling sets are included with this equipment?
This equipment includes two unused tooling sets as part of the included equipment.
Is this Maplan MHF 400/200 in good working condition?
This Maplan MHF 400/200 is in good working condition and can be seen in Istanbul.
When was the machine manufactured?
The machine was manufactured in 2013.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Category | Injection moulding machines |
| Clamping force | 200 T |
| Tie bar spacing (H) | 520 mm |
| Tie bar spacing (V) | 520 mm |
| Shot volume | 400 cm³ |
| Robot interface | |
| Mould size | |
| worked hours | 18000 hours |
| hours under power | |
| state | excellent |
| At local norms | --------- |
| status | |
| Last availability date | 30/09/2026 |
| Product id | P71118016 |
| Language |
Maplan MHF 400/200
Vstřikolis Maplan MHF 400/200
Maplan MHF 400/200
Maplan MHF 400/200 Spritzgießmaschine
Maplan MHF 400/200
Maplan MHF 400/200 Rubber Injection moulding machine
Inyectora de plástico Maplan MHF 400/200
Presse à injecter Maplan MHF 400/200
Maplan MHF 400/200
Maplan MHF 400/200
Pressa ad iniezione Maplan MHF 400/200
Maplan MHF 400/200
Maplan MHF 400/200
Wtryskarka Maplan MHF 400/200
Maplan MHF 400/200
Maplan MHF 400/200
Maplan MHF 400/200 Термопластавтомат
Maplan MHF 400/200
Maplan MHF 400/200
Kauçuk enjeksiyon kalıplama makinesi Maplan MHF 400/200
|
This Maplan MHF 400/200 rubber injection moulding machine features a horizontal 4-column design with a full hydraulic clamping system. It has a clamping force of 200 tons (1979 kN) and a shot volume of 400 cm³. The tie bar spacing measures 520 mm both horizontally and vertically, providing a compact yet sturdy frame for mould installation.
The machine includes a control panel equipped with a screen and buttons located on the right side, allowing for operational control and monitoring. Hydraulic and pneumatic piping and valves are housed inside a panel, with two pressure gauges visible on the right side, indicating precise pressure management during operation. The clamping unit consists of large metal cylinders and mold plates, supported by hydraulic cylinders and other mechanical components. Some oil or grease is visible on parts of the hydraulic cylinders, which is common in machines of this type.
The heating platen dimensions are approximately 510 mm by 510 mm, with a maximum operating temperature of 210 °C and a heating power of 10.4 kW. The hydraulic system operates at a pressure of 280 bar, with an oil tank capacity of about 190 liters. The motor capacity is 7.5 kW with a flow rate of approximately 39 liters per minute. The machine's total connected electrical load is around 20 kW, requiring a power supply of 3 x 400 V at 50 Hz, with a control voltage of 24 V.
The machine's dimensions are roughly 3650 mm in width, 1085 mm in depth, and 2240 mm in height, with an approximate weight of 5300 kg. It is situated in an industrial environment, as indicated by the overhead lighting and piping. A metal bin is placed on the floor beneath the machine, likely for operational convenience or waste collection.
This unit was manufactured in 2013 and is designed for rubber injection molding processes, suitable for various production needs requiring precise clamping and injection capabilities.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2017 |
| Offers online | 1 |
| Last activity | Oct. 16, 2026 |
EN
- Languages
English (GB)