Contact us to receive an offer.
| Manufacturer | MAICO |
|---|---|
| Model | CORSA 800T EL |
| Year | 1997 |
| Location | Spain
|
Product category: Injection moulding machine
Overview:
This listing describes an injection moulding machine that is reported as currently operational. The machine’s main physical dimensions and key technical data are provided below to assist prospective buyers in assessing fit and compatibility with their production setup.
Key specifications (as listed):
- Operational status: The machine is currently operational.
- DIMENSIONS (L x W x H): 13.6 x 2.5 x 3.2 m
- L/D: 20N
- Spindle volume: 6232 cm3
- Between bars: 960 x 960 mm
Description and notes:
The listing provides overall machine footprint and major numerical specifications to help evaluate transport, floor space and clearance requirements. The L/D value, spindle volume and between-bars measurement are included to inform considerations related to shot size, screw/spindle capacity and platen/tie-bar spacing respectively. No additional component details, electrical data, control type, motor ratings, year of manufacture, operating hours or service history are provided in this description.
What to request before purchase:
Prospective buyers should request any remaining technical documentation and additional information needed for a full evaluation, such as control model, motor/pump ratings, hydraulic and electrical specifications, maintenance records, parts lists, and any available run-time or performance data. Arrange an on-site inspection or live demonstration, and confirm transport and installation requirements given the machine’s stated dimensions.
If you would like, we can help list specific questions to ask the seller or prepare a checklist for inspection and acceptance.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
The machine is currently operational.
DIMENSIONS (L x W x H) 13.6 x 2.5 x 3.2m
L/D 20N
Spindle volume 6232 cm3
Between bars 960 x 960 mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Factory – large company |
| Active since | 2026 |
| Offers online | 1 |
| Last activity | Sept. 4, 2026 |
The machine is currently operational.
DIMENSIONS (L x W x H) 13.6 x 2.5 x 3.2m
L/D 20N
Spindle volume 6232 cm3
Between bars 960 x 960 mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Product category: Injection moulding machine
Overview:
This listing describes an injection moulding machine that is reported as currently operational. The machine’s main physical dimensions and key technical data are provided below to assist prospective buyers in assessing fit and compatibility with their production setup.
Key specifications (as listed):
- Operational status: The machine is currently operational.
- DIMENSIONS (L x W x H): 13.6 x 2.5 x 3.2 m
- L/D: 20N
- Spindle volume: 6232 cm3
- Between bars: 960 x 960 mm
Description and notes:
The listing provides overall machine footprint and major numerical specifications to help evaluate transport, floor space and clearance requirements. The L/D value, spindle volume and between-bars measurement are included to inform considerations related to shot size, screw/spindle capacity and platen/tie-bar spacing respectively. No additional component details, electrical data, control type, motor ratings, year of manufacture, operating hours or service history are provided in this description.
What to request before purchase:
Prospective buyers should request any remaining technical documentation and additional information needed for a full evaluation, such as control model, motor/pump ratings, hydraulic and electrical specifications, maintenance records, parts lists, and any available run-time or performance data. Arrange an on-site inspection or live demonstration, and confirm transport and installation requirements given the machine’s stated dimensions.
If you would like, we can help list specific questions to ask the seller or prepare a checklist for inspection and acceptance.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – large company |
| Active since | 2026 |
| Offers online | 1 |
| Last activity | Sept. 4, 2026 |
Germany
1998
| Clamping force | 80 T |
|---|---|
| Robot interface |
| Screw diameter | 35 mm |
|---|---|
| Mould size |
| Clamping force | 800 T |
|---|---|
| Tie bar spacing (H) | 1120 mm |
| Robot interface | |
| Mould size |
| Screw diameter | 105 mm |
|---|---|
| Tie bar spacing (V) | 1000 mm |
| Opening of the press | 1400 mm |
| Clamping force | 1000 T |
|---|---|
| Tie bar spacing (H) | 1420 mm |
| Shot volume | 5195 cm³ |
| Pressure on material | 2296 bar |
| Platen width | 1710 mm |
| Equipped with robot | Yes |
| Number of cores | 2 |
| Opening of the press | 2000 mm |
| Screw diameter | 105 mm |
|---|---|
| Tie bar spacing (V) | 1170 mm |
| Shot weight | 3689 g |
| Platen length | 1960 mm |
| Bi-metal screw | No |
| Robot interface | |
| Number of heating zones | 9 |
| Mould size |
| Clamping force | 300 T |
|---|---|
| Tie bar spacing (H) | 750 mm |
| Shot volume | 1039 cm³ |
| Platen length | 1300 mm |
| Equipped with robot | Yes |
| Number of cores | 4 |
| Opening of the press | 900 mm |
| Screw diameter | 70 mm |
|---|---|
| Tie bar spacing (V) | 1000 mm |
| Pressure on material | 1735 bar |
| Bi-metal screw | Yes |
| Robot interface | |
| Number of heating zones | 16 |
| Mould size |
Slovenia
1998
| Clamping force | 340 T |
|---|---|
| Shot volume | 156 cm³ |
| Equipped with robot | Yes |
| Number of heating zones | 8 |
| Screw diameter | 35 mm |
|---|---|
| Pressure on material | 2156 bar |
| Robot interface | Euromap Interface 12 |
| Mould size |
| Clamping force | 750 T |
|---|---|
| Mould size |
| Robot interface |
|---|
Austria
2011
| Clamping force | 40 T |
|---|---|
| Shot volume | 25 cm³ |
| Robot interface | |
| Mould size |
| Screw diameter | 18 mm |
|---|---|
| Pressure on material | 2200 bar |
| Opening of the press | 338 mm |
| Clamping force | T |
|---|---|
| Tie bar spacing (H) | 580 mm |
| Shot volume | cm³ |
| Pressure on material | 1850 bar |
| Platen width | 850 mm |
| Equipped with robot | |
| Number of cores | |
| Opening of the press | 540 mm |
| Screw diameter | 55 mm |
|---|---|
| Tie bar spacing (V) | 580 mm |
| Shot weight | 519 g |
| Platen length | 850 mm |
| Bi-metal screw | |
| Robot interface | |
| Number of heating zones | |
| Mould size |
| Clamping force | 150 T |
|---|---|
| Tie bar spacing (H) | 500 mm |
| Shot volume | 399 cm³ |
| Pressure on material | 1598 bar |
| Platen width | 750 mm |
| Robot interface | |
| Opening of the press | 850 mm |
| Screw diameter | 45 mm |
|---|---|
| Tie bar spacing (V) | 500 mm |
| Shot weight | 260 g |
| Platen length | 750 mm |
| Equipped with robot | No |
| Number of cores | 2 |
| Mould size | 250 |
| Clamping force | 300 T |
|---|---|
| Tie bar spacing (H) | 730 mm |
| Shot volume | 412 cm³ |
| Pressure on material | 2000 bar |
| Platen width | 1040 mm |
| Equipped with robot | Yes |
| Opening of the press | 600 mm |
| Screw diameter | 50 mm |
|---|---|
| Tie bar spacing (V) | 730 mm |
| Shot weight | 375 g |
| Platen length | 1040 mm |
| Bi-metal screw | No |
| Robot interface | |
| Mould size |
| Clamping force | 3150 T |
|---|---|
| Tie bar spacing (H) | 2250 mm |
| Shot volume | 13205 cm³ |
| Pressure on material | 1636 bar |
| Platen width | 2780 mm |
| Equipped with robot | No |
| Opening of the press | 2250 mm |
| Screw diameter | 155 mm |
|---|---|
| Tie bar spacing (V) | 1800 mm |
| Shot weight | 9642 g |
| Platen length | 3230 mm |
| Bi-metal screw | No |
| Robot interface | |
| Mould size |
| Clamping force | 200 T |
|---|---|
| Tie bar spacing (H) | 560 mm |
| Pressure on material | 2402 bar |
| Number of cores | 1 |
| Screw diameter | 40 mm |
|---|---|
| Tie bar spacing (V) | 560 mm |
| Robot interface | |
| Mould size |
| Clamping force | 125 T |
|---|---|
| Tie bar spacing (H) | 475 mm |
| Shot volume | 231 cm³ |
| Pressure on material | 1855 bar |
| Platen width | mm |
| Number of cores | 1 |
| Opening of the press | mm |
| Screw diameter | 40 mm |
|---|---|
| Tie bar spacing (V) | 450 mm |
| Shot weight | 210 g |
| Platen length | mm |
| Robot interface | |
| Number of heating zones | |
| Mould size |
| Clamping force | 150 T |
|---|---|
| Tie bar spacing (H) | 500 mm |
| Shot volume | 523 cm³ |
| Pressure on material | 1904 bar |
| Platen width | 790 mm |
| Equipped with robot | Yes |
| Number of cores | 2 |
| Mould size |
| Screw diameter | 55 mm |
|---|---|
| Tie bar spacing (V) | 500 mm |
| Shot weight | 476 g |
| Platen length | 780 mm |
| Bi-metal screw | No |
| Robot interface | |
| Opening of the press | 600 mm |
| Clamping force | 130 T |
|---|---|
| Tie bar spacing (H) | 420 mm |
| Shot volume | 139 cm³ |
| Pressure on material | 2500 bar |
| Platen width | 615 mm |
| Equipped with robot | No |
| Number of cores | 1 |
| Mould size | 420 x 615 |
| Screw diameter | 35 mm |
|---|---|
| Tie bar spacing (V) | 420 mm |
| Shot weight | 117 g |
| Platen length | 615 mm |
| Bi-metal screw | Yes |
| Robot interface | euromap 12 |
| Opening of the press | 500 mm |
| Clamping force | 400 T |
|---|---|
| Tie bar spacing (H) | 1200 mm |
| Shot volume | 2480 cm³ |
| Pressure on material | 1600 bar |
| Platen width | 1100 mm |
| Equipped with robot | Yes |
| Number of cores | 4 |
| Opening of the press | 1000 mm |
| Screw diameter | 90 mm |
|---|---|
| Tie bar spacing (V) | 1100 mm |
| Shot weight | 2281 g |
| Platen length | 1200 mm |
| Bi-metal screw | Yes |
| Robot interface | Euromap 67 |
| Number of heating zones | 4 |
| Mould size | 450 |
| Clamping force | 150 T |
|---|---|
| Tie bar spacing (H) | 500 mm |
| Shot volume | 377 cm³ |
| Pressure on material | 1892 bar |
| Platen width | 790 mm |
| Robot interface | |
| Mould size |
| Screw diameter | 50 mm |
|---|---|
| Tie bar spacing (V) | 500 mm |
| Shot weight | 343 g |
| Platen length | 780 mm |
| Equipped with robot | Yes |
| Number of heating zones | 5 |
| Clamping force | 1000 T |
|---|---|
| Tie bar spacing (H) | 1400 mm |
| Shot volume | 5453 cm³ |
| Pressure on material | 1482 bar |
| Platen width | 1710 mm |
| Equipped with robot | Yes |
| Number of cores | 4 |
| Opening of the press | 1900 mm |
| Screw diameter | 115 mm |
|---|---|
| Tie bar spacing (V) | 1150 mm |
| Shot weight | 4962 g |
| Platen length | 1960 mm |
| Bi-metal screw | Yes |
| Robot interface | EUROMAP 67 |
| Number of heating zones | 7 |
| Mould size | 500 - 1200 MM |
| Clamping force | 330 T |
|---|---|
| Tie bar spacing (H) | 710 mm |
| Shot volume | 763 cm³ |
| Pressure on material | 1905 bar |
| Platen width | 950 mm |
| Robot interface | |
| Number of heating zones | 3 |
| Mould size | 330/710 mm |
| Screw diameter | 60 mm |
|---|---|
| Tie bar spacing (V) | 630 mm |
| Shot weight | g |
| Platen length | 1040 mm |
| Bi-metal screw | No |
| Number of cores | 3 |
| Opening of the press | 675 mm |
| Clamping force | 2350 T |
|---|---|
| Tie bar spacing (H) | 2000 mm |
| Shot volume | 10556 cm³ |
| Pressure on material | 2000 bar |
| Platen width | 2450 mm |
| Robot interface | |
| Opening of the press | 3700 mm |
| Screw diameter | 185 mm |
|---|---|
| Tie bar spacing (V) | 1600 mm |
| Shot weight | 9606 g |
| Platen length | 2850 mm |
| Bi-metal screw | Yes |
| Number of heating zones | 10 |
| Mould size | 40 Toneladas |
Spain
2014
| Clamping force | 160 T |
|---|---|
| Shot volume | 172 cm³ |
| Robot interface | |
| Mould size |
| Screw diameter | 36 mm |
|---|---|
| Shot weight | 154 g |
| Opening of the press | 557 mm |
| Clamping force | 220 T |
|---|---|
| Tie bar spacing (H) | 570 mm |
| Shot volume | 431 cm³ |
| Pressure on material | 4290 bar |
| Platen width | 795 mm |
| Equipped with robot | No |
| Opening of the press | 950 mm |
| Screw diameter | 50 mm |
|---|---|
| Tie bar spacing (V) | 570 mm |
| Shot weight | 392 g |
| Platen length | 795 mm |
| Bi-metal screw | Yes |
| Robot interface | |
| Mould size | 300-650 |
| Clamping force | 150 T |
|---|---|
| Tie bar spacing (H) | 520 mm |
| Shot volume | 201 cm³ |
| Pressure on material | 2000 bar |
| Platen width | 695 mm |
| Robot interface | |
| Opening of the press | 450 mm |
| Screw diameter | 40 mm |
|---|---|
| Tie bar spacing (V) | 520 mm |
| Shot weight | 184 g |
| Platen length | 695 mm |
| Equipped with robot | Yes |
| Number of heating zones | 5 |
| Mould size |
| Clamping force | 550 T |
|---|---|
| Equipped with robot | No |
| Number of cores | 0 |
| Mould size |
| Shot volume | 1960 cm³ |
|---|---|
| Robot interface | |
| Number of heating zones | 0 |
| Clamping force | 450 T |
|---|---|
| Tie bar spacing (H) | 750 mm |
| Shot volume | 2380 cm³ |
| Pressure on material | 2050 bar |
| Platen width | 1100 mm |
| Equipped with robot | No |
| Number of cores | 25 |
| Opening of the press | 1000 mm |
| Screw diameter | 85 mm |
|---|---|
| Tie bar spacing (V) | 710 mm |
| Shot weight | 2237 g |
| Platen length | 1140 mm |
| Bi-metal screw | |
| Robot interface | SI |
| Number of heating zones | |
| Mould size |
Poland
1998
| Clamping force | 600 T |
|---|---|
| Shot weight | 2850 g |
| Mould size |
| Screw diameter | 90 mm |
|---|---|
| Robot interface |
| Clamping force | 200 T |
|---|---|
| Tie bar spacing (H) | 500 mm |
| Shot volume | 323 cm³ |
| Platen length | 750 mm |
| Robot interface |
| Screw diameter | 45 mm |
|---|---|
| Tie bar spacing (V) | 500 mm |
| Pressure on material | 1973 bar |
| Platen width | 750 mm |
| Mould size |
| Clamping force | 200 T |
|---|---|
| Tie bar spacing (H) | 560 mm |
| Shot volume | 445 cm³ |
| Pressure on material | 1946 bar |
| Platen width | 1235 mm |
| Opening of the press | 575 mm |
| Screw diameter | 50 mm |
|---|---|
| Tie bar spacing (V) | 560 mm |
| Shot weight | 400 g |
| Platen length | 1235 mm |
| Robot interface | |
| Mould size | 310 - 760 |
| Clamping force | 165 T |
|---|---|
| Tie bar spacing (H) | 525 mm |
| Robot interface |
| Screw diameter | 43 mm |
|---|---|
| Tie bar spacing (V) | 525 mm |
| Mould size | 630mm |
| Clamping force | 400 T |
|---|---|
| Shot volume | 61 cm³ |
| Pressure on material | 1451 bar |
| Equipped with robot | Yes |
| Number of cores | 2 |
| Mould size | 250-700mm |
| Screw diameter | 80 mm |
|---|---|
| Shot weight | 1611 g |
| Bi-metal screw | No |
| Robot interface | witt system |
| Opening of the press | 650 mm |
CORSA 800T EL Машина за инжектиране Maico Corsa 800 EL
CORSA 800T EL Vstřikovací stroj Maico Corsa 800 EL
CORSA 800T EL Maico Corsa 800 EL injektionsmaskine
CORSA 800T EL Maico Spritzgießmaschine Corsa 800 EL
CORSA 800T EL Μηχανή έγχυσης Maico Corsa 800 EL
CORSA 800T EL Maico Injection Machine Corsa 800 EL
CORSA 800T EL Máquina inyección Maico Corsa 800 EL
CORSA 800T EL Machine d'injection Maico Corsa 800 EL
CORSA 800T EL Maico Corsa 800 EL injekcijska mašina
CORSA 800T EL Maico Corsa 800 EL befecskendező gép
CORSA 800T EL Macchina a iniezione Maico Corsa 800 EL
CORSA 800T EL Maico Corsa 800 EL įpurškimo mašina
CORSA 800T EL Maico Corsa 800 EL injectiemachine
CORSA 800T EL Wtryskarka Maico Corsa 800 EL
CORSA 800T EL Máquina de injeção Maico Corsa 800 EL
CORSA 800T EL Mașină de injecție Maico Corsa 800 EL
CORSA 800T EL Впрыскивающая машина Maico Corsa 800 EL
CORSA 800T EL Машина за инјекцију Maico Corsa 800 EL
CORSA 800T EL Maico Corsa 800 EL injektionsmaskin
CORSA 800T EL Enjeksiyon Makinesi Maico Corsa 800 EL
Italy
France
Romania
Turkey
EN
- Languages
English (GB)