| Manufacturer | LPKF |
|---|---|
| Model | ProtoMat S104 (complete prototyping line) |
| Year | 2019 |
| Location | USA
|
Complete LPKF in-house PCB prototyping line offered as a single set. The original listing indicates all equipment was purchased new in 2019 and the combined original purchase price was approximately $96,000 USD. The line provides the tools needed to mill, plate, print, place, reflow, and laminate multilayer prototype circuit boards in-house and includes software/licenses and many original accessories per the original listing.
Included equipment and key features (as stated in the original listing):
- LPKF ProtoMat S104: advanced milling system for single- and double-sided and multilayer prototype PCBs. Specified features include a 10,000–100,000 rpm spindle, 20-position automatic tool change, integrated copper-thickness sensing, fiducial alignment camera, vacuum table, solid granite base, acoustic cabinet, and CircuitPro software. Noted as suitable for RF/microwave work.
- LPKF MultiPress S (with auto pump): multilayer lamination press; the listing notes a 4-layer set sized 9x12 is included.
- LPKF Contac S4: galvanic through-hole plating system with reverse-pulse plating and a 7" touchscreen control.
- LPKF ProtoPlace S: semi-automatic pick-and-place with swiveling color micro camera, a motorized 75-bin component carousel, feeder carrier, 8/12/16 mm tape feeders, and stick feeders (SO8–SO28, PLCC28–44, PLCC52–84).
- LPKF ProtoFlow S/N2: lead-free SMT reflow oven with capability up to 320 °C and an inert-gas connection.
- LPKF ProtoPrint S-RP: fine-pitch screen/stencil printer plus a ZelFlex QR 362x480 stretching frame.
- Support gear listed: silent compressor, HEPA variable-speed dust extraction, standard and RF tooling starter packs, a ProConduct kit, and a flat-screen monitor.
Additional notes from the original listing: power requirements vary by machine (mix of 120 V and 220–240 V single phase), CircuitPro software/licenses and original accessories are included, and consumable plating chemicals are not included (noted as past shelf life). The seller indicated the line is offered as one set but would also consider selling individual machines. The buyer is responsible for rigging and freight arrangements.
If you need an itemized parts list or further equipment details that were in the original listing, request those specifics from the seller; serial numbers and seller contact details were provided in the original listing but are not reproduced here.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Complete LPKF in-house PCB prototyping line, sold as one working set. Everything needed to mill, plate, print, place, and reflow multilayer prototype boards in-house — all LPKF, all purchased new in 2019 and kept in good working condition. Original combined purchase price approximately $96,000 USD.
Included equipment:
- LPKF ProtoMat S104 — advanced milling system for single/double-sided and multilayer prototype PCBs. 10,000–100,000 rpm spindle, 20-position automatic tool change, integrated copper-thickness sensing, fiducial alignment camera, vacuum table, solid granite base, acoustic cabinet, and CircuitPro software. Ideal for RF/microwave work.
- LPKF MultiPress S (with auto pump) — multilayer lamination press, includes 4-layer multilayer set (9x12).
- LPKF Contac S4 — galvanic through-hole plating system with reverse-pulse plating and 7" touchscreen control.
- LPKF ProtoPlace S — semi-automatic pick & place with swiveling color micro camera, motorized 75-bin component carousel, feeder carrier, 8/12/16 mm tape feeders, and stick feeders (SO8–SO28, PLCC28–44, PLCC52–84).
- LPKF ProtoFlow S/N2 — lead-free SMT reflow oven, up to 320 °C, with inert-gas connection.
- LPKF ProtoPrint S-RP — fine-pitch screen/stencil printer + ZelFlex QR 362x480 stretching frame.
- Support gear: silent compressor, HEPA variable-speed dust extraction, standard + RF tooling starter packs, ProConduct kit, flat-screen monitor.
Notes:
- Power: mix of 120 V and 220–240 V single phase (machine-dependent).
- CircuitPro software/licenses and original accessories included.
- Consumable plating chemicals not included (past shelf life).
- Serial numbers and full itemized LPKF part list available on request.
- Buyer arranges rigging/freight. Located in Pittsburgh, PA, USA. Will help coordinate.
- Will also consider selling individual machines.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Is this oven offered separately?
This oven is offered separately from other equipment.
Which component is included in this LPKF PCB Prototyping Line?
This LPKF PCB Prototyping Line includes ProtoMat S104.
Which module is included in this LPKF PCB Prototyping Line?
This LPKF PCB Prototyping Line includes MultiPress S.
Which unit is included in this LPKF PCB Prototyping Line?
This LPKF PCB Prototyping Line includes Contac S4.
Which item is included in this LPKF PCB Prototyping Line?
This LPKF PCB Prototyping Line includes ProtoPlace S.
Which piece is included in this LPKF PCB Prototyping Line?
This LPKF PCB Prototyping Line includes ProtoFlow Origin.
Is This LPKF MultiPress S available separately from the PCB Prototyping Line?
This LPKF MultiPress S is available separately from the complete LPKF PCB Prototyping Line.
The machine has been used twice; is it in like-new condition?
This LPKF MultiPress S has been used twice and is in like-new condition.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2026 |
| Offers online | 1 |
| Last activity | Sept. 10, 2026 |
Complete LPKF in-house PCB prototyping line, sold as one working set. Everything needed to mill, plate, print, place, and reflow multilayer prototype boards in-house — all LPKF, all purchased new in 2019 and kept in good working condition. Original combined purchase price approximately $96,000 USD.
Included equipment:
- LPKF ProtoMat S104 — advanced milling system for single/double-sided and multilayer prototype PCBs. 10,000–100,000 rpm spindle, 20-position automatic tool change, integrated copper-thickness sensing, fiducial alignment camera, vacuum table, solid granite base, acoustic cabinet, and CircuitPro software. Ideal for RF/microwave work.
- LPKF MultiPress S (with auto pump) — multilayer lamination press, includes 4-layer multilayer set (9x12).
- LPKF Contac S4 — galvanic through-hole plating system with reverse-pulse plating and 7" touchscreen control.
- LPKF ProtoPlace S — semi-automatic pick & place with swiveling color micro camera, motorized 75-bin component carousel, feeder carrier, 8/12/16 mm tape feeders, and stick feeders (SO8–SO28, PLCC28–44, PLCC52–84).
- LPKF ProtoFlow S/N2 — lead-free SMT reflow oven, up to 320 °C, with inert-gas connection.
- LPKF ProtoPrint S-RP — fine-pitch screen/stencil printer + ZelFlex QR 362x480 stretching frame.
- Support gear: silent compressor, HEPA variable-speed dust extraction, standard + RF tooling starter packs, ProConduct kit, flat-screen monitor.
Notes:
- Power: mix of 120 V and 220–240 V single phase (machine-dependent).
- CircuitPro software/licenses and original accessories included.
- Consumable plating chemicals not included (past shelf life).
- Serial numbers and full itemized LPKF part list available on request.
- Buyer arranges rigging/freight. Located in Pittsburgh, PA, USA. Will help coordinate.
- Will also consider selling individual machines.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Is this oven offered separately?
This oven is offered separately from other equipment.
Which component is included in this LPKF PCB Prototyping Line?
This LPKF PCB Prototyping Line includes ProtoMat S104.
Which module is included in this LPKF PCB Prototyping Line?
This LPKF PCB Prototyping Line includes MultiPress S.
Which unit is included in this LPKF PCB Prototyping Line?
This LPKF PCB Prototyping Line includes Contac S4.
Which item is included in this LPKF PCB Prototyping Line?
This LPKF PCB Prototyping Line includes ProtoPlace S.
Which piece is included in this LPKF PCB Prototyping Line?
This LPKF PCB Prototyping Line includes ProtoFlow Origin.
Is This LPKF MultiPress S available separately from the PCB Prototyping Line?
This LPKF MultiPress S is available separately from the complete LPKF PCB Prototyping Line.
The machine has been used twice; is it in like-new condition?
This LPKF MultiPress S has been used twice and is in like-new condition.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Complete LPKF in-house PCB prototyping line offered as a single set. The original listing indicates all equipment was purchased new in 2019 and the combined original purchase price was approximately $96,000 USD. The line provides the tools needed to mill, plate, print, place, reflow, and laminate multilayer prototype circuit boards in-house and includes software/licenses and many original accessories per the original listing.
Included equipment and key features (as stated in the original listing):
- LPKF ProtoMat S104: advanced milling system for single- and double-sided and multilayer prototype PCBs. Specified features include a 10,000–100,000 rpm spindle, 20-position automatic tool change, integrated copper-thickness sensing, fiducial alignment camera, vacuum table, solid granite base, acoustic cabinet, and CircuitPro software. Noted as suitable for RF/microwave work.
- LPKF MultiPress S (with auto pump): multilayer lamination press; the listing notes a 4-layer set sized 9x12 is included.
- LPKF Contac S4: galvanic through-hole plating system with reverse-pulse plating and a 7" touchscreen control.
- LPKF ProtoPlace S: semi-automatic pick-and-place with swiveling color micro camera, a motorized 75-bin component carousel, feeder carrier, 8/12/16 mm tape feeders, and stick feeders (SO8–SO28, PLCC28–44, PLCC52–84).
- LPKF ProtoFlow S/N2: lead-free SMT reflow oven with capability up to 320 °C and an inert-gas connection.
- LPKF ProtoPrint S-RP: fine-pitch screen/stencil printer plus a ZelFlex QR 362x480 stretching frame.
- Support gear listed: silent compressor, HEPA variable-speed dust extraction, standard and RF tooling starter packs, a ProConduct kit, and a flat-screen monitor.
Additional notes from the original listing: power requirements vary by machine (mix of 120 V and 220–240 V single phase), CircuitPro software/licenses and original accessories are included, and consumable plating chemicals are not included (noted as past shelf life). The seller indicated the line is offered as one set but would also consider selling individual machines. The buyer is responsible for rigging and freight arrangements.
If you need an itemized parts list or further equipment details that were in the original listing, request those specifics from the seller; serial numbers and seller contact details were provided in the original listing but are not reproduced here.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2026 |
| Offers online | 1 |
| Last activity | Sept. 10, 2026 |
Машина за пробиване и фрезоване LPKF ProtoMat S104 (complete prototyping line)
Vrtací a směrovací stroj LPKF ProtoMat S104 (complete prototyping line)
LPKF ProtoMat S104 (complete prototyping line) Bore- og fræsemaskine
LPKF ProtoMat S104 (complete prototyping line) Leiterplatte (PCB) - Bohr- und Formschneidemaschinen
Μηχάνημα διάτρησης και δρομολόγησης LPKF ProtoMat S104 (complete prototyping line)
Complete LPKF PCB Prototyping Line — ProtoMat S104, MultiPress S, Contac S4, ProtoPlace S, ProtoFlow
Máquina de taladrado y enrutamiento LPKF ProtoMat S104 (complete prototyping line)
Machine de perçage et routage LPKF ProtoMat S104 (complete prototyping line)
Stroj za bušenje i glodanje LPKF ProtoMat S104 (complete prototyping line)
LPKF ProtoMat S104 (complete prototyping line) Fúró és marógép
Perforatrice a pantografo LPKF ProtoMat S104 (complete prototyping line)
LPKF ProtoMat S104 (complete prototyping line) Gręžimo ir frezavimo staklės
LPKF ProtoMat S104 (complete prototyping line) Boor- en freesmachine
Maszyna do trasowania płytek obwodów drukowanych LPKF ProtoMat S104 (complete prototyping line)
Máquina de perfuração e fresagem LPKF ProtoMat S104 (complete prototyping line)
Mașină de găurit și frezat LPKF ProtoMat S104 (complete prototyping line)
LPKF ProtoMat S104 (complete prototyping line) Устройство для сверления и маршрутизации
Mašina za bušenje i glodanje LPKF ProtoMat S104 (complete prototyping line)
LPKF ProtoMat S104 (complete prototyping line) Borr- och fräsmaskin
Delme ve Yönlendirme Makinası LPKF ProtoMat S104 (complete prototyping line)
EN
- Languages
English (GB)