Contact us to receive an offer.
| Manufacturer | LNS |
|---|---|
| Model | Sprint S3 |
| Year | 2008 |
| Location | Denmark
|
This LNS Sprint S3 bar feeder, manufactured in 2008, is designed to support bar diameters up to 52.0 mm. It was previously mounted on an Okuma LT200-M machine from the same year. In 2022, the unit underwent partial renovation, during which the hand control, control panel, and PLC were replaced to enhance its operational control.
The bar feeder comes equipped with complete channel sets suitable for bar diameters of 28 mm, 43 mm, and 52 mm, providing versatility for different machining requirements. The unit features a long rectangular design with a protective cover on top to safeguard the feeding mechanism.
Safety and operational controls include an emergency stop button located on the side of the feeder, along with a yellow emergency stop switch positioned next to the control panel. The control panel itself includes buttons and a display screen, facilitating user interaction and monitoring.
Internally, the bar feeder houses well-organized electrical components such as wiring and relays, as well as mechanical and hydraulic parts including a red motor and pressure gauges. Hydraulic and pneumatic lines are neatly routed inside, and a pressure regulator with gauge is mounted externally on the side of the feeder.
The feeding mechanism and chains have been maintained in good condition, and the overall unit appears clean and well-kept with no visible damage or leaks. While the exterior shows some minor surface marks, there is no major damage, and the unit is supported by sturdy legs with adjustable bar supports underneath.
This bar feeder is suitable for integration into industrial CNC machining setups requiring reliable bar feeding capabilities for medium-sized bars.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Year: approx. 2008, has been mounted on an Okuma LT200-M also from 2008.
Renovation: When installed in 2022, the hand control/control panel and PLC were replaced.
Equipment: Complete channel sets for 28, 43 and 52 mm are included.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Factory – small or medium company |
| Active since | 2021 |
| Offers online | 1 |
| Last activity | June 4, 2026 |
Year: approx. 2008, has been mounted on an Okuma LT200-M also from 2008.
Renovation: When installed in 2022, the hand control/control panel and PLC were replaced.
Equipment: Complete channel sets for 28, 43 and 52 mm are included.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
This LNS Sprint S3 bar feeder, manufactured in 2008, is designed to support bar diameters up to 52.0 mm. It was previously mounted on an Okuma LT200-M machine from the same year. In 2022, the unit underwent partial renovation, during which the hand control, control panel, and PLC were replaced to enhance its operational control.
The bar feeder comes equipped with complete channel sets suitable for bar diameters of 28 mm, 43 mm, and 52 mm, providing versatility for different machining requirements. The unit features a long rectangular design with a protective cover on top to safeguard the feeding mechanism.
Safety and operational controls include an emergency stop button located on the side of the feeder, along with a yellow emergency stop switch positioned next to the control panel. The control panel itself includes buttons and a display screen, facilitating user interaction and monitoring.
Internally, the bar feeder houses well-organized electrical components such as wiring and relays, as well as mechanical and hydraulic parts including a red motor and pressure gauges. Hydraulic and pneumatic lines are neatly routed inside, and a pressure regulator with gauge is mounted externally on the side of the feeder.
The feeding mechanism and chains have been maintained in good condition, and the overall unit appears clean and well-kept with no visible damage or leaks. While the exterior shows some minor surface marks, there is no major damage, and the unit is supported by sturdy legs with adjustable bar supports underneath.
This bar feeder is suitable for integration into industrial CNC machining setups requiring reliable bar feeding capabilities for medium-sized bars.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2021 |
| Offers online | 1 |
| Last activity | June 4, 2026 |
Подавател на пръти LNS Sprint S3
Tyčový podavač LNS Sprint S3
LNS Sprint S3 Stangføder
LNS Sprint S3 Stangenlademagazin
Τροφοδότης ράβδων LNS Sprint S3
LNS Sprint S3 Bar feeder
Cargador de barras LNS Sprint S3
Embarreur LNS Sprint S3
Uređaj za hranjenje šipki LNS Sprint S3
LNS Sprint S3 Rúdadagoló
Caricatore di barre LNS Sprint S3
LNS Sprint S3 Strypų padavimo įrenginys
LNS Sprint S3 Staafaanvoerder
Podajnik LNS Sprint S3
Alimentador de barras LNS Sprint S3
Alimentator de bare LNS Sprint S3
LNS Sprint S3 Устройство для подачи прутка для одношпиндельных токарных станков
Uređaj za uvlačenje šipki LNS Sprint S3
LNS Sprint S3 Stångmatningsmaskin
Çubuk sürücü LNS Sprint S3
EN
- Languages
English (GB)