Contact us to receive an offer.
| Manufacturer | Lemorau |
|---|---|
| Model | MEBR+400 |
| Year | 2019 |
| Location | Germany
|
Lemorau MEBR+ — modular digital finishing machine designed for label production in both full rotary and semi-rotary modes. The machine is built with a modular concept allowing addition of modules to match job requirements and production volumes. Semi-rotary mode is intended for short runs; full rotary for higher-speed, longer runs. A servo-driven compensator and servo motor-based tension control maintain registration tolerance during acceleration, deceleration and production and provide constant and taper tension control in semi-rotary mode.
Key standard features
- Maximum rotary speed: 200 m/min (blank labels) and 120 m/min for die cutting to register. Maximum semi-rotary speed: 40 m/min (dependent on plate size) for die cutting to register.
- Web widths available: 250, 330, 400 mm (10, 13, 16 in).
- Electronic counter (labels/meters/rolls/total meters and labels).
- Adjustable splice table with pneumatic clamps and foot pedal for jog control.
- Electronic web guide system with ultrasonic sensor for guiding opaque and clear materials.
- 250-job memory for quick job setups.
- Six sets of circular knives with lateral adjustment.
- Two interchangeable pneumatic rewinders (diameters: 25, 40 and 76 mm / 1, 1.5, 3 in).
- Paper and matrix break detection; labels in / labels out rewinding; semi-automatic rewinding.
- Automatic stop at master roll end with programmable end-of-roll function.
- Multi-language touchscreen and remote assistance via internet connection.
- Die repeat ranges: rotary mode 203.20–431.80 mm (8–17 in); semi-rotary mode 41.30–371.00 mm (1.6–14.6 in).
- Max rewinder diameter: 600 mm for single-shaft or 350 mm for two shafts. Max unwinder diameter: 700 mm.
- CE conformity certification.
Additional equipment included (as listed)
- Anti-static bar
- Clear-on-clear sensor
- Corona treatment
- Speed pack (80 m/min semi-rotary)
- Turret rewinding
- 2 spot varnish flexo units (rotary register)
- Web cleaner
- QRC (Quick Remote Connection)
- Additional die repeat set for semi-rotary mode (41.30–371.00 mm)
If you need further clarification about configurations, module compatibility or available spare parts, please request specific details.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
LEMORAU MEBR+ Modular Digital Finishing Machine.
Lemorau MEBR+ is a digital finishing machine built in a modular concept where it can be added modules according to customer needs. MEBR+ runs in full rotary and semi-rotary mode. Semi-rotary for short runs and full rotary for high speed longer runs. The registration tolerance is maintained during acceleration, deceleration and production time due to the latest servo technology. Lemorau MEBR+ is equipped with servo-driven compensator system which provides superior web tension control when the machine is running in semi-rotary mode.
Standard Features
// Maximum rotary speed 200 m/min (656 ft/min.) – Blank labels
// Maximum rotary speed 120 m/min (394 ft/min.) – Die cutting to register
// Maximum semi-rotary speed 40 m/min (131 ft/min.) dependent on plate size – Die cutting to register
// Web width 250, 330, 400 mm (10, 13, 16 in)
// Electronic Counter (Labels/ Meters/ Rolls counter/ Total meters and labels Counter)
// Adjustable splice table with pneumatic clamps
// Electronic web guide system with ultrasonic sensor which enables guiding of opaque and clear materials
// Automatic web tension control system by servo motors – Constant and Taper tension
// 250 Job memory for easy and quick job set ups
// 6 sets of circular knives with lateral adjustment
// 2 interchangeable pneumatic rewinders of 25, 40 and 76 mm diameter (1, 1.5, 3 in)
// Paper and matrix break detection
// Labels in/ labels out rewinding
// Remote assistance through internet connection
// Automatic stop at master roll end with programmable end of roll function
// Semi- Automatic rewinding
// Foot pedal to jog the machine
// Multi language touch screen
// Die repeats 203,20 – 431,80 mm (8 – 17 in) – Rotary mode
// Die repeats 41,30- 371,00 mm (1,6 – 14,6 in) – Semi-Rotary mode
// Max rewinder diameter: 600 mm (23.7 in) for 1 shaft / 350 mm (13.8 in) for 2 shafts
// Max unwinder diameter 700 mm (27.5 in)
// CE conformity certification
Additional Equipment
/ 1 Anti-staticbar
/ 1 Clear on clear sensor
/ 1 Corana treatment
/ 1 Speed pack (80m/min semi-rotay)
/ 1 Turret rewinding
/ 2 Spot varnish flexo unit rotary registe
/ 1 Web cleaner
/ QRC (Quick remote connection)
/ 1 new Die repeats 41,30- 371,00 mm (1,6 – 14,6 in) – Semi-Rotary mode
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Factory – small or medium company |
| Active since | 2026 |
| Offers online | 1 |
| Last activity | Aug. 26, 2026 |
LEMORAU MEBR+ Modular Digital Finishing Machine.
Lemorau MEBR+ is a digital finishing machine built in a modular concept where it can be added modules according to customer needs. MEBR+ runs in full rotary and semi-rotary mode. Semi-rotary for short runs and full rotary for high speed longer runs. The registration tolerance is maintained during acceleration, deceleration and production time due to the latest servo technology. Lemorau MEBR+ is equipped with servo-driven compensator system which provides superior web tension control when the machine is running in semi-rotary mode.
Standard Features
// Maximum rotary speed 200 m/min (656 ft/min.) – Blank labels
// Maximum rotary speed 120 m/min (394 ft/min.) – Die cutting to register
// Maximum semi-rotary speed 40 m/min (131 ft/min.) dependent on plate size – Die cutting to register
// Web width 250, 330, 400 mm (10, 13, 16 in)
// Electronic Counter (Labels/ Meters/ Rolls counter/ Total meters and labels Counter)
// Adjustable splice table with pneumatic clamps
// Electronic web guide system with ultrasonic sensor which enables guiding of opaque and clear materials
// Automatic web tension control system by servo motors – Constant and Taper tension
// 250 Job memory for easy and quick job set ups
// 6 sets of circular knives with lateral adjustment
// 2 interchangeable pneumatic rewinders of 25, 40 and 76 mm diameter (1, 1.5, 3 in)
// Paper and matrix break detection
// Labels in/ labels out rewinding
// Remote assistance through internet connection
// Automatic stop at master roll end with programmable end of roll function
// Semi- Automatic rewinding
// Foot pedal to jog the machine
// Multi language touch screen
// Die repeats 203,20 – 431,80 mm (8 – 17 in) – Rotary mode
// Die repeats 41,30- 371,00 mm (1,6 – 14,6 in) – Semi-Rotary mode
// Max rewinder diameter: 600 mm (23.7 in) for 1 shaft / 350 mm (13.8 in) for 2 shafts
// Max unwinder diameter 700 mm (27.5 in)
// CE conformity certification
Additional Equipment
/ 1 Anti-staticbar
/ 1 Clear on clear sensor
/ 1 Corana treatment
/ 1 Speed pack (80m/min semi-rotay)
/ 1 Turret rewinding
/ 2 Spot varnish flexo unit rotary registe
/ 1 Web cleaner
/ QRC (Quick remote connection)
/ 1 new Die repeats 41,30- 371,00 mm (1,6 – 14,6 in) – Semi-Rotary mode
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Lemorau MEBR+ — modular digital finishing machine designed for label production in both full rotary and semi-rotary modes. The machine is built with a modular concept allowing addition of modules to match job requirements and production volumes. Semi-rotary mode is intended for short runs; full rotary for higher-speed, longer runs. A servo-driven compensator and servo motor-based tension control maintain registration tolerance during acceleration, deceleration and production and provide constant and taper tension control in semi-rotary mode.
Key standard features
- Maximum rotary speed: 200 m/min (blank labels) and 120 m/min for die cutting to register. Maximum semi-rotary speed: 40 m/min (dependent on plate size) for die cutting to register.
- Web widths available: 250, 330, 400 mm (10, 13, 16 in).
- Electronic counter (labels/meters/rolls/total meters and labels).
- Adjustable splice table with pneumatic clamps and foot pedal for jog control.
- Electronic web guide system with ultrasonic sensor for guiding opaque and clear materials.
- 250-job memory for quick job setups.
- Six sets of circular knives with lateral adjustment.
- Two interchangeable pneumatic rewinders (diameters: 25, 40 and 76 mm / 1, 1.5, 3 in).
- Paper and matrix break detection; labels in / labels out rewinding; semi-automatic rewinding.
- Automatic stop at master roll end with programmable end-of-roll function.
- Multi-language touchscreen and remote assistance via internet connection.
- Die repeat ranges: rotary mode 203.20–431.80 mm (8–17 in); semi-rotary mode 41.30–371.00 mm (1.6–14.6 in).
- Max rewinder diameter: 600 mm for single-shaft or 350 mm for two shafts. Max unwinder diameter: 700 mm.
- CE conformity certification.
Additional equipment included (as listed)
- Anti-static bar
- Clear-on-clear sensor
- Corona treatment
- Speed pack (80 m/min semi-rotary)
- Turret rewinding
- 2 spot varnish flexo units (rotary register)
- Web cleaner
- QRC (Quick Remote Connection)
- Additional die repeat set for semi-rotary mode (41.30–371.00 mm)
If you need further clarification about configurations, module compatibility or available spare parts, please request specific details.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2026 |
| Offers online | 1 |
| Last activity | Aug. 26, 2026 |
Използвана машина за следпечатна обработка Lemorau MEBR+400
Použitý stroj Lemorau MEBR+400 pro následné zpracování tiskovin
Brugt Lemorau MEBR+400 eftertryksmaskine
Gebrauchte Lemorau MEBR+400 Nachdruckmaschine
Μεταχειρισμένη μηχανή μετα-εκτύπωσης Lemorau MEBR+400
Used Lemorau MEBR+400 Post press machine
Máquina de postimpresión Lemorau MEBR+400 de segunda mano
Machine de finition Lemorau MEBR+400 d'occasion
Rabljena Lemorau MEBR+400 post-press mašina
Használt Lemorau MEBR+400 utómunkálati gép
Macchina post-stampa Lemorau MEBR+400 usata
Naudota „Lemorau MEBR+400“ spaudos apdorojimo mašina
Tweedehands Lemorau MEBR+400 nabewerkingsmachine
Używana maszyna do obróbki po druku Lemorau MEBR+400
Máquina de pós-impressão Lemorau MEBR+400 usada
Mașină de post-imprimare Lemorau MEBR+400, second-hand
Подержанная машина для послепечатной обработки Lemorau MEBR+400
Korišćena Lemorau MEBR+400 mašina za post-pres
Begagnad Lemorau MEBR+400 eftertrycksmaskin
İkinci el Lemorau MEBR+400 baskı sonrası makinesi
EN
- Languages
English (GB)