| Manufacturer | LAGUN |
|---|---|
| Model | FBF 1200 |
| Year | |
| Location | Italy
|
Product overview:
This listing is for a LAGUN FBF 1200 fixed-bed milling machine configured with CNC control. The machine’s stated capacity and working envelope are provided below in both metric and imperial units.
Key specifications:
- Category / Type: Milling Machine, Fixed Bed
- Brand / Model: LAGUN FBF 1200
- Working area (Longitudinal X): 1200 mm / 47.24 in
- Working area (Vertical Y): 660 mm / 25.98 in
- Cross ram (Z): 560 mm / 22.05 in
- Table size (V): 1400 x 550 mm / 55.12 x 21.65 in
- CNC control: HEIDENHAIN
- Spindle: Morse taper sleeve, ISO50
- Head 1 type: Birotative
- Motor power (listed): 15 HP
Additional notes:
The information above is taken from the provided product data. No accessories, tooling, or additional components are included here unless listed in the specifications above. There are no image-based observations included for this listing.
Disclaimer and recommendation:
The data supplied may originate from manufacturer information and other available sources; it might be incomplete or contain inaccuracies and therefore cannot be guaranteed or form a contractual commitment. Prospective buyers are advised to inspect the machine in person or request further confirmation of specifications, condition, and any additional equipment prior to purchase.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Category
Milling Machine
Type
Fixed Bed
Brand
LAGUN
Model
FBF 1200
Capacity
1200x660x560 mm / 47.24x25.98x22.05 in
Technical Specifications
Convert to Metric / Imperial
WORKING AREA
Longitudinal (X)
1200 mm / 47.24 in
Vertical (Y)
660 mm / 25.98 in
Cross RAM (Z)
560 mm / 22.05 in
Table (V)
1400x550 mm / 55.12x21.65 in
CNC
CNC
HEIDENHAIN
SPINDLE
Morse taper sleeve
ISO50
HEAD 1
Type
Birotative
EXTRA
Motor power
15 HP
The data provided is based on information available to us, where possible obtained from manufacturers; however, despite our good faith, due to the nature and complexity of the equipment, such data might be incomplete and/or inaccurate and cannot in any case be guaranteed or constitute any contractual obligation. We always recommend inspecting the equipment and requesting confirmation of the data.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2007 |
| Offers online | 181 |
| Last activity | Oct. 29, 2026 |
GAMBA GIOVANNI S.R.L., known by its brand Gamba Macchine, is a trusted Italian company with over 70 years of experience in the machine tool industry. Based in Gardone Val Trompia in the heart of Italy’s industrial region, the company specializes in the sale of high-quality new and used metalworking machinery for chip removal processes.
Founded in 1950 by Giovanni Gamba, the company has grown into a reference point for precision and reliability in the European industrial market. Today, it is managed by the second and third generations of the Gamba family who continue to uphold a strong tradition of technical expertise and customer-oriented service.
Gamba Macchine operates from two strategic locations in the province of Brescia, offering a wide range of machinery from leading international manufacturers. Their deep knowledge of production processes allows them to assist clients in finding the most suitable and efficient solutions for their machining needs.
With a strong focus on quality, performance, and after-sales support, Gamba Macchine is the ideal partner for companies looking to invest in reliable and cost-effective metalworking solutions. Whether you need a single machine or a complete production line, Gamba Macchine delivers value, expertise, and confidence.
Category
Milling Machine
Type
Fixed Bed
Brand
LAGUN
Model
FBF 1200
Capacity
1200x660x560 mm / 47.24x25.98x22.05 in
Technical Specifications
Convert to Metric / Imperial
WORKING AREA
Longitudinal (X)
1200 mm / 47.24 in
Vertical (Y)
660 mm / 25.98 in
Cross RAM (Z)
560 mm / 22.05 in
Table (V)
1400x550 mm / 55.12x21.65 in
CNC
CNC
HEIDENHAIN
SPINDLE
Morse taper sleeve
ISO50
HEAD 1
Type
Birotative
EXTRA
Motor power
15 HP
The data provided is based on information available to us, where possible obtained from manufacturers; however, despite our good faith, due to the nature and complexity of the equipment, such data might be incomplete and/or inaccurate and cannot in any case be guaranteed or constitute any contractual obligation. We always recommend inspecting the equipment and requesting confirmation of the data.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Product overview:
This listing is for a LAGUN FBF 1200 fixed-bed milling machine configured with CNC control. The machine’s stated capacity and working envelope are provided below in both metric and imperial units.
Key specifications:
- Category / Type: Milling Machine, Fixed Bed
- Brand / Model: LAGUN FBF 1200
- Working area (Longitudinal X): 1200 mm / 47.24 in
- Working area (Vertical Y): 660 mm / 25.98 in
- Cross ram (Z): 560 mm / 22.05 in
- Table size (V): 1400 x 550 mm / 55.12 x 21.65 in
- CNC control: HEIDENHAIN
- Spindle: Morse taper sleeve, ISO50
- Head 1 type: Birotative
- Motor power (listed): 15 HP
Additional notes:
The information above is taken from the provided product data. No accessories, tooling, or additional components are included here unless listed in the specifications above. There are no image-based observations included for this listing.
Disclaimer and recommendation:
The data supplied may originate from manufacturer information and other available sources; it might be incomplete or contain inaccuracies and therefore cannot be guaranteed or form a contractual commitment. Prospective buyers are advised to inspect the machine in person or request further confirmation of specifications, condition, and any additional equipment prior to purchase.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2007 |
| Offers online | 181 |
| Last activity | Oct. 29, 2026 |
GAMBA GIOVANNI S.R.L., known by its brand Gamba Macchine, is a trusted Italian company with over 70 years of experience in the machine tool industry. Based in Gardone Val Trompia in the heart of Italy’s industrial region, the company specializes in the sale of high-quality new and used metalworking machinery for chip removal processes.
Founded in 1950 by Giovanni Gamba, the company has grown into a reference point for precision and reliability in the European industrial market. Today, it is managed by the second and third generations of the Gamba family who continue to uphold a strong tradition of technical expertise and customer-oriented service.
Gamba Macchine operates from two strategic locations in the province of Brescia, offering a wide range of machinery from leading international manufacturers. Their deep knowledge of production processes allows them to assist clients in finding the most suitable and efficient solutions for their machining needs.
With a strong focus on quality, performance, and after-sales support, Gamba Macchine is the ideal partner for companies looking to invest in reliable and cost-effective metalworking solutions. Whether you need a single machine or a complete production line, Gamba Macchine delivers value, expertise, and confidence.
CNC фрезова машина с неподвижна станина LAGUN FBF 1200
CNC ložová frézka LAGUN FBF 1200
LAGUN FBF 1200 CNC planfræsemaskine med fast bord
LAGUN FBF 1200 CNC Bettfräsmaschine
Φρέζα CNC σταθερής κλίνης LAGUN FBF 1200
LAGUN FBF 1200 CNC bed type milling machine
Fresadora CNC de bancada fija LAGUN FBF 1200
Fraiseuse CNC à banc fixe LAGUN FBF 1200
CNC glodalica s nepomičnim ležištem LAGUN FBF 1200
LAGUN FBF 1200 CNC ágyas marógép
Fresatrice CNC a banco fisso LAGUN FBF 1200
LAGUN FBF 1200 CNC frezavimo staklė su fiksuota lova
LAGUN FBF 1200 CNC bedfreesmachine
Frezarka CNC łożowa LAGUN FBF 1200
Fresadora CNC de bancada fixa LAGUN FBF 1200
Mașină de frezat CNC cu banc fix LAGUN FBF 1200
LAGUN FBF 1200 Фрезерный станок с неподвижной станиной с ЧПУ
CNC glodalica sa nepokretnim ležištem LAGUN FBF 1200
LAGUN FBF 1200 CNC bäddfräsmaskin
CNC sabit tablalı freze tezgâhı LAGUN FBF 1200
EN
- Languages
English (GB)