Contact us to receive an offer.
| Manufacturer | KT |
|---|---|
| Model | 130 |
| Year | |
| Location | Sweden
|
| Category | Butchery - mincers / grinders |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Last availability date | 30/10/2026 |
| Product id | P261030039 |
| Language |
Мелница KT 130
Mlýnek na maso KT 130
KT 130 Kværn
KT 130 Fleischwolf
Τραπεζίτης KT 130
KT 130 Grinder
Molino triturador KT 130
Broyeur KT 130
Brusilica KT 130
KT 130 Őrlőgép
Macinatore KT 130
KT 130 Malūnėlis
KT 130 Slijper
Wilk masarski KT 130
Moedor KT 130
Polizor KT 130
KT 130 Мясорубка
Grinder KT 130
KT 130 Kvarn
Et kıyma makinesi KT 130
|
KT-130 mixed mill, manufactured by KT. The machine is listed as used. It operates only while the pedal is pressed, so operation depends on keeping the pedal engaged. A power supply of at least 32A is required. Please take these operating and electrical requirements into account when assessing whether the machine is suitable for your intended setup.
The supplied information identifies the manufacturer and model as KT and 130, respectively. No year of manufacture is specified. Further details about the machine’s configuration, included accessories, dimensions, capacity, power rating, or service history have not been provided, so these should not be assumed. The description also does not state that the machine has been tested, serviced, or refurbished. Its condition is recorded as used, and no additional condition details are available.
This listing is for a KT-130 mixed mill. The stated pedal-dependent operation and minimum 32A electrical requirement are the key details provided for this machine. Buyers should consider these requirements when planning installation and use. No other specifications or claims about performance are included.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Mixed mill KT-130. The machine only operates when the pedal is pressed. The machine requires at least 32A. Specifications: Manufacturer KT, Model Blandarkvarn KT-130, Condition Used, .
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 58 |
| Last activity | Nov. 3, 2026 |
Mixed mill KT-130. The machine only operates when the pedal is pressed. The machine requires at least 32A. Specifications: Manufacturer KT, Model Blandarkvarn KT-130, Condition Used, .
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Category | Butchery - mincers / grinders |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Last availability date | 30/10/2026 |
| Product id | P261030039 |
| Language |
Мелница KT 130
Mlýnek na maso KT 130
KT 130 Kværn
KT 130 Fleischwolf
Τραπεζίτης KT 130
KT 130 Grinder
Molino triturador KT 130
Broyeur KT 130
Brusilica KT 130
KT 130 Őrlőgép
Macinatore KT 130
KT 130 Malūnėlis
KT 130 Slijper
Wilk masarski KT 130
Moedor KT 130
Polizor KT 130
KT 130 Мясорубка
Grinder KT 130
KT 130 Kvarn
Et kıyma makinesi KT 130
|
KT-130 mixed mill, manufactured by KT. The machine is listed as used. It operates only while the pedal is pressed, so operation depends on keeping the pedal engaged. A power supply of at least 32A is required. Please take these operating and electrical requirements into account when assessing whether the machine is suitable for your intended setup.
The supplied information identifies the manufacturer and model as KT and 130, respectively. No year of manufacture is specified. Further details about the machine’s configuration, included accessories, dimensions, capacity, power rating, or service history have not been provided, so these should not be assumed. The description also does not state that the machine has been tested, serviced, or refurbished. Its condition is recorded as used, and no additional condition details are available.
This listing is for a KT-130 mixed mill. The stated pedal-dependent operation and minimum 32A electrical requirement are the key details provided for this machine. Buyers should consider these requirements when planning installation and use. No other specifications or claims about performance are included.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 58 |
| Last activity | Nov. 3, 2026 |
EN
- Languages
English (GB)