Contact us to receive an offer.
| Manufacturer | Krauss Maffei |
|---|---|
| Model | KM250-1400CX |
| Year | 2014 |
| Location | Slovakia
|
This Krauss Maffei KM250-1400CX injection moulding machine, manufactured in 2014, offers a clamping force of 250 tons (2500 kN) and is equipped with a horizontal hydraulic drive system. It features a screw diameter of 60 mm and a shot weight of 471 grams, suitable for various injection molding applications. The tie bar spacing is 630 x 630 mm, and the platen size measures 695 mm in length by 1050 mm in width, providing ample space for mold installation. The machine's maximum opening stroke is 630 mm, with a mold height range from 320 to 830 mm, accommodating a variety of mold sizes.
The injection unit is powered by an approximately 87 kW installed drive, capable of injection pressures up to 2387 bar. It offers an injection stroke of 210 mm and a maximum injection speed of 120 mm/s. The ejector system includes an ejector stroke of 180 mm and an ejector force of 78 kN, facilitating efficient part ejection.
Equipped with advanced features, this machine includes the BluePower servo pump drive system, which enhances energy efficiency through servo-hydraulics. It also comes with a hydraulic core pull on the operator side, an eight-fold water battery with magnetic valve shut-off, and a hot-runner control system with four zones (ZE 88.5404). The MC6 control system features a 19-inch touch TFT screen, offering PV-control for injection speed, hold pressure, and back pressure, along with event logging, quality monitoring, cycle analysis, and maintenance reminders.
A notable accessory is the integrated LRX 150 linear robot with a payload capacity under 15 kg, providing X, Y (telescopic), and Z-axis movements, including B-servo and C-pneumatic rotation axes. The robot is fully integrated with the MC6 control interface, enhancing automation capabilities.
Safety features include fencing, emergency stop, and key switch. The machine also has four vacuum circuits (Venturi), a transport conveyor interface, and control circuit. It complies with CE conformity for the integrated system (injection moulding machine plus robot).
Physically, the machine measures approximately 6.1 m in length, 2.2 m in width, and 2.2 m in height, with a weight around 14 to 14.3 tons. The hydraulic oil capacity is approximately 700 liters, and the total connected load is 87 kW. The exterior is painted in RAL 9002 grey-white and Pantone 3005 blue.
Visual inspection shows the machine is clean and well-maintained, with large transparent safety doors providing visibility of internal mold and injection components. The operator panel with a touchscreen interface is mounted on the right side and appears functional and clean. Hydraulic and pneumatic components are visible and intact, indicating good upkeep. An emergency stop button is located below the touchscreen for safety.
This Krauss Maffei KM250-1400CX is a robust and energy-efficient injection moulding machine with integrated robotic automation, suitable for high-precision and high-volume production environments.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Krauss Maffei KM250-1400CX (2014) Clamping force: 250 t Screw diameter: 60 mm Tie bar distance: 630x630 mm Show weight: 471 g/PS Shot volume: 518 cm3 Type: Horizontal Drive: Hydraulic Clamping Unit Clamping force: 2500 KN Platen size (H × V): 695 × 1050 mm Tie bar distance: 630 × 630 mm Opening stroke (max.): 630 mm Mould height (min. / max.): 320 / 830 mm Injection Unit Installed drive power: approx. 87 kW Screw diameter: 55 / 60 / 70 mm Injection pressure: 2387 / 2006 / 1473 bar Injection volume: 417 / 518 / 679 cm³ Shot weight (PS): 379 / 471 / 618 g Injection stroke: 210 mm Injection speed (max.): 120 mm/s Ejector System Ejector stroke: 180 mm Ejector force: 78 kN General Data Machine dimensions (L × W × H): approx. 6.1 × 2.2 × 2.2 m Machine weight: approx. 14.0 – 14.3 t Total connected load: 87 kW Hydraulic oil capacity: approx. 700 L Equipment of the machine: BluePower servo pump drive system (energy-efficient servo-hydraulics) Hydraulic core pull 1× on operator side + pressure release system 8-fold water battery with magnetic valve shut-off Hot-runner control 4 zones (ZE 88.5404) MC6 control with 19″ Touch TFT screen PV-control for injection speed, hold pressure, back pressure Event log / quality monitoring / cycle analysis / maintenance reminders BluePower energy-saving servo drive system LRX 150 linear robot (payload < 15 kg), incl.: X = 900 mm / Y = 700 + 700 mm (telescopic) / Z = 2000 mm B-servo / C-pneumatic rotation axes Full integration (MC6 control interface) Safety package – fencing, emergency stop, key switch Vacuum circuits × 4 (Venturi) Transport conveyor interface & control circuit CE conformity declaration for integrated system (IMM + Robot) Painted RAL 9002 grey-white / Pantone 3005 blue 2014 Running hours: 42.084
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 48 |
| Last activity | Oct. 29, 2026 |
Krauss Maffei KM250-1400CX (2014) Clamping force: 250 t Screw diameter: 60 mm Tie bar distance: 630x630 mm Show weight: 471 g/PS Shot volume: 518 cm3 Type: Horizontal Drive: Hydraulic Clamping Unit Clamping force: 2500 KN Platen size (H × V): 695 × 1050 mm Tie bar distance: 630 × 630 mm Opening stroke (max.): 630 mm Mould height (min. / max.): 320 / 830 mm Injection Unit Installed drive power: approx. 87 kW Screw diameter: 55 / 60 / 70 mm Injection pressure: 2387 / 2006 / 1473 bar Injection volume: 417 / 518 / 679 cm³ Shot weight (PS): 379 / 471 / 618 g Injection stroke: 210 mm Injection speed (max.): 120 mm/s Ejector System Ejector stroke: 180 mm Ejector force: 78 kN General Data Machine dimensions (L × W × H): approx. 6.1 × 2.2 × 2.2 m Machine weight: approx. 14.0 – 14.3 t Total connected load: 87 kW Hydraulic oil capacity: approx. 700 L Equipment of the machine: BluePower servo pump drive system (energy-efficient servo-hydraulics) Hydraulic core pull 1× on operator side + pressure release system 8-fold water battery with magnetic valve shut-off Hot-runner control 4 zones (ZE 88.5404) MC6 control with 19″ Touch TFT screen PV-control for injection speed, hold pressure, back pressure Event log / quality monitoring / cycle analysis / maintenance reminders BluePower energy-saving servo drive system LRX 150 linear robot (payload < 15 kg), incl.: X = 900 mm / Y = 700 + 700 mm (telescopic) / Z = 2000 mm B-servo / C-pneumatic rotation axes Full integration (MC6 control interface) Safety package – fencing, emergency stop, key switch Vacuum circuits × 4 (Venturi) Transport conveyor interface & control circuit CE conformity declaration for integrated system (IMM + Robot) Painted RAL 9002 grey-white / Pantone 3005 blue 2014 Running hours: 42.084
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
This Krauss Maffei KM250-1400CX injection moulding machine, manufactured in 2014, offers a clamping force of 250 tons (2500 kN) and is equipped with a horizontal hydraulic drive system. It features a screw diameter of 60 mm and a shot weight of 471 grams, suitable for various injection molding applications. The tie bar spacing is 630 x 630 mm, and the platen size measures 695 mm in length by 1050 mm in width, providing ample space for mold installation. The machine's maximum opening stroke is 630 mm, with a mold height range from 320 to 830 mm, accommodating a variety of mold sizes.
The injection unit is powered by an approximately 87 kW installed drive, capable of injection pressures up to 2387 bar. It offers an injection stroke of 210 mm and a maximum injection speed of 120 mm/s. The ejector system includes an ejector stroke of 180 mm and an ejector force of 78 kN, facilitating efficient part ejection.
Equipped with advanced features, this machine includes the BluePower servo pump drive system, which enhances energy efficiency through servo-hydraulics. It also comes with a hydraulic core pull on the operator side, an eight-fold water battery with magnetic valve shut-off, and a hot-runner control system with four zones (ZE 88.5404). The MC6 control system features a 19-inch touch TFT screen, offering PV-control for injection speed, hold pressure, and back pressure, along with event logging, quality monitoring, cycle analysis, and maintenance reminders.
A notable accessory is the integrated LRX 150 linear robot with a payload capacity under 15 kg, providing X, Y (telescopic), and Z-axis movements, including B-servo and C-pneumatic rotation axes. The robot is fully integrated with the MC6 control interface, enhancing automation capabilities.
Safety features include fencing, emergency stop, and key switch. The machine also has four vacuum circuits (Venturi), a transport conveyor interface, and control circuit. It complies with CE conformity for the integrated system (injection moulding machine plus robot).
Physically, the machine measures approximately 6.1 m in length, 2.2 m in width, and 2.2 m in height, with a weight around 14 to 14.3 tons. The hydraulic oil capacity is approximately 700 liters, and the total connected load is 87 kW. The exterior is painted in RAL 9002 grey-white and Pantone 3005 blue.
Visual inspection shows the machine is clean and well-maintained, with large transparent safety doors providing visibility of internal mold and injection components. The operator panel with a touchscreen interface is mounted on the right side and appears functional and clean. Hydraulic and pneumatic components are visible and intact, indicating good upkeep. An emergency stop button is located below the touchscreen for safety.
This Krauss Maffei KM250-1400CX is a robust and energy-efficient injection moulding machine with integrated robotic automation, suitable for high-precision and high-volume production environments.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 48 |
| Last activity | Oct. 29, 2026 |
Krauss Maffei KM250-1400CX
Krauss Maffei KM250-1400CX (2014) blue power LRX150 linear robot robot
Krauss Maffei KM250-1400CX
Krauss Maffei KM250-1400CX
Krauss Maffei KM250-1400CX
Krauss Maffei KM250-1400CX
Krauss Maffei KM250-1400CX
Krauss Maffei KM250-1400CX
Krauss Maffei KM250-1400CX
Krauss Maffei KM250-1400CX
Krauss Maffei KM250-1400CX
Krauss Maffei KM250-1400CX
Krauss Maffei KM250-1400CX
Krauss Maffei KM250-1400CX
Krauss Maffei KM250-1400CX
Krauss Maffei KM250-1400CX
Krauss Maffei KM250-1400CX
Krauss Maffei KM250-1400CX
Krauss Maffei KM250-1400CX
Krauss Maffei KM250-1400CX
EN
- Languages
English (GB)