| Manufacturer | Krauss Maffei |
|---|---|
| Model | KM 650 - 2700 C2 |
| Year | 2009 |
| Location | Germany
|
This Krauss Maffei KM 650 - 2700 C2 injection moulding machine, manufactured in 2009, offers a robust clamping force of 6500 kN (650 tons) suitable for high-demand production environments. The machine features a mould platen size of 1520 mm by 1470 mm, with tie bar spacing of 1000 mm horizontally and 930 mm vertically, providing flexibility for various mould sizes. The mould opening stroke is 1150 mm, with a minimum mould height of 675 mm and a maximum daylight of 1825 mm. The hydraulic ejector has a stroke of 135 mm and an ejector force of 226 kN. The injection unit is equipped with a 70 mm diameter screw with an L/D ratio of 23, delivering a shot volume of 1097 cm³ and a shot weight of approximately 998 grams (PS). It operates at an injection pressure of 2389 bar and an injection rate of 393 cm³/s, with a maximum plasticising rate of 83 g/s and a screw speed of 218 rpm. The nozzle pressure can reach up to 173 kN. The machine is powered by a 75 kW pump motor and includes 7 adjustable barrel heating zones with a total heating capacity of 36 kW. Dimensions of the machine are approximately 8.7 m in length, 2.9 m in width, and 2.8 m in height, with a total weight of 44,000 kg. It comes equipped with anti-vibration pads for stability. Additional features include one air valve, eight pneumatic sequential valves, an accumulator, two hydraulic core pulls on the movable plate, two on the fixed plate, and a robot interface compliant with EUROMAP 67 standards. The machine is equipped with a robot. Visually, the machine is housed within a transparent protective enclosure on the front and side, allowing clear view of the injection and clamping units. It appears clean and well-maintained without visible damage, although the frame shows some minor surface stains and signs of wear. The machine is mounted on wooden blocks for stability on a concrete floor. The rear side reveals two large hydraulic cylinders atop the clamping mechanism and control boxes, with a blue filter or oil separator attached near the bottom right side. This comprehensive setup makes the KM 650 - 2700 C2 a capable and versatile injection moulding machine suitable for various industrial applications.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Clamping unit:
Clamping force
6500
kN
Mould opening force, max.
346
kN
Travel force movable platen opening
169
kN
Travel force movable platen closing
144
kN
Size of mould platens (h x v)
1520 x 1470
mm
Distance between tie bars (h x v)
1000 x 930
mm
Mould opening stroke
1150
mm
Mould height min
675
mm
Max. daylight
1825
mm
Hydraulic ejector - stroke
135
mm
Ejector force
226
kN
Injection unit:
Screw diameter
70
mm
Ls/D ratio
23
Injection pressure
2389
bar
Stroke volume
1097
ccm
Shot weight (PS)
998
gr.
Injection rate
393
ccm/s
Screw speed
218
1/min
Plasticising rate max.
83
g/s
Nozzle pressure
173
kN
Electric and Hydraulic Equipment:
Nominal capacity of pump motor
75
kW
Installed heating capacity
36
kW
Adjustable barrel heating zones
7
Dimensions and weights:
Dimensions of the machine ca.
8,70 x 2,90 x 2,80
m
Total machine weight
44000
kg
Accessories:
- Anti vibration pads
Additional options:
- 1 x air valve
- 8 x pneumatic sequentional valves
- Accumulator
- 2 x hydr. core pulls on movable plate
- 2 x hydr. core pulls on fix plate
- Robot interface according to EUROMAP 67
Clamping force (kN): 6500
Manufacturer: Krauss Maffei
Stroke volume (ccm): 1097
Year: 2009
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
What year was this Krauss Maffei KM 650 - 2700 C2 made?
This Krauss Maffei KM 650 - 2700 C2 injection molding machine was manufactured in 2009.
What is the condition of the machine?
This injection molding machine is in used and tested condition.
Is this Krauss Maffei KM 650 - 2700 C2 currently dismantled?
This Krauss Maffei KM 650 - 2700 C2 injection molding machine is currently dismantled.
Is this Krauss Maffei KM 650 – 2700 C2 available for purchase?
This Krauss Maffei KM 650 – 2700 C2 injection molding machine is available for purchase.
What is the reference number for this machine?
This machine is identified by reference number 14194.
What type of operations is this machine suitable for?
This Krauss Maffei KM 650 – 2700 C2 injection molding machine is suitable for small to medium-sized factory operations.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2007 |
| Offers online | 16 |
| Last activity | Sept. 16, 2026 |
Clamping unit:
Clamping force
6500
kN
Mould opening force, max.
346
kN
Travel force movable platen opening
169
kN
Travel force movable platen closing
144
kN
Size of mould platens (h x v)
1520 x 1470
mm
Distance between tie bars (h x v)
1000 x 930
mm
Mould opening stroke
1150
mm
Mould height min
675
mm
Max. daylight
1825
mm
Hydraulic ejector - stroke
135
mm
Ejector force
226
kN
Injection unit:
Screw diameter
70
mm
Ls/D ratio
23
Injection pressure
2389
bar
Stroke volume
1097
ccm
Shot weight (PS)
998
gr.
Injection rate
393
ccm/s
Screw speed
218
1/min
Plasticising rate max.
83
g/s
Nozzle pressure
173
kN
Electric and Hydraulic Equipment:
Nominal capacity of pump motor
75
kW
Installed heating capacity
36
kW
Adjustable barrel heating zones
7
Dimensions and weights:
Dimensions of the machine ca.
8,70 x 2,90 x 2,80
m
Total machine weight
44000
kg
Accessories:
- Anti vibration pads
Additional options:
- 1 x air valve
- 8 x pneumatic sequentional valves
- Accumulator
- 2 x hydr. core pulls on movable plate
- 2 x hydr. core pulls on fix plate
- Robot interface according to EUROMAP 67
Clamping force (kN): 6500
Manufacturer: Krauss Maffei
Stroke volume (ccm): 1097
Year: 2009
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
What year was this Krauss Maffei KM 650 - 2700 C2 made?
This Krauss Maffei KM 650 - 2700 C2 injection molding machine was manufactured in 2009.
What is the condition of the machine?
This injection molding machine is in used and tested condition.
Is this Krauss Maffei KM 650 - 2700 C2 currently dismantled?
This Krauss Maffei KM 650 - 2700 C2 injection molding machine is currently dismantled.
Is this Krauss Maffei KM 650 – 2700 C2 available for purchase?
This Krauss Maffei KM 650 – 2700 C2 injection molding machine is available for purchase.
What is the reference number for this machine?
This machine is identified by reference number 14194.
What type of operations is this machine suitable for?
This Krauss Maffei KM 650 – 2700 C2 injection molding machine is suitable for small to medium-sized factory operations.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
This Krauss Maffei KM 650 - 2700 C2 injection moulding machine, manufactured in 2009, offers a robust clamping force of 6500 kN (650 tons) suitable for high-demand production environments. The machine features a mould platen size of 1520 mm by 1470 mm, with tie bar spacing of 1000 mm horizontally and 930 mm vertically, providing flexibility for various mould sizes. The mould opening stroke is 1150 mm, with a minimum mould height of 675 mm and a maximum daylight of 1825 mm. The hydraulic ejector has a stroke of 135 mm and an ejector force of 226 kN. The injection unit is equipped with a 70 mm diameter screw with an L/D ratio of 23, delivering a shot volume of 1097 cm³ and a shot weight of approximately 998 grams (PS). It operates at an injection pressure of 2389 bar and an injection rate of 393 cm³/s, with a maximum plasticising rate of 83 g/s and a screw speed of 218 rpm. The nozzle pressure can reach up to 173 kN. The machine is powered by a 75 kW pump motor and includes 7 adjustable barrel heating zones with a total heating capacity of 36 kW. Dimensions of the machine are approximately 8.7 m in length, 2.9 m in width, and 2.8 m in height, with a total weight of 44,000 kg. It comes equipped with anti-vibration pads for stability. Additional features include one air valve, eight pneumatic sequential valves, an accumulator, two hydraulic core pulls on the movable plate, two on the fixed plate, and a robot interface compliant with EUROMAP 67 standards. The machine is equipped with a robot. Visually, the machine is housed within a transparent protective enclosure on the front and side, allowing clear view of the injection and clamping units. It appears clean and well-maintained without visible damage, although the frame shows some minor surface stains and signs of wear. The machine is mounted on wooden blocks for stability on a concrete floor. The rear side reveals two large hydraulic cylinders atop the clamping mechanism and control boxes, with a blue filter or oil separator attached near the bottom right side. This comprehensive setup makes the KM 650 - 2700 C2 a capable and versatile injection moulding machine suitable for various industrial applications.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2007 |
| Offers online | 16 |
| Last activity | Sept. 16, 2026 |
Машина за леене под налягане Krauss Maffei KM 650 - 2700 C2
Vstřikolis Krauss Maffei KM 650 - 2700 C2
Krauss Maffei KM 650 - 2700 C2 Sprøjtestøbemaskine
Krauss Maffei KM 650 - 2700 C2 Spritzgießmaschine
Μηχανή χύτευσης με έγχυση Krauss Maffei KM 650 - 2700 C2
Krauss Maffei KM 650 - 2700 C2 Injection moulding machine
Inyectora de plástico Krauss Maffei KM 650 - 2700 C2
Presse à injecter Krauss Maffei KM 650 - 2700 C2
Stroj za injekcijsko prešanje Krauss Maffei KM 650 - 2700 C2
Krauss Maffei KM 650 - 2700 C2 Fröccsöntő gép
Pressa ad iniezione Krauss Maffei KM 650 - 2700 C2
Įpurškimo formavimo mašina Krauss Maffei KM 650 - 2700 C2
Krauss Maffei KM 650 - 2700 C2 Spuitgietmachine
Wtryskarka Krauss Maffei KM 650 - 2700 C2
Máquina de injecção Krauss Maffei KM 650 - 2700 C2
Mașină de turnat prin injecție Krauss Maffei KM 650 - 2700 C2
Krauss Maffei KM 650 - 2700 C2 Термопластавтомат
Mašina za brizganje Krauss Maffei KM 650 - 2700 C2
Krauss Maffei KM 650 - 2700 C2 Formsprutningsmaskin
Enjeksiyon kalıplama makinesi Krauss Maffei KM 650 - 2700 C2
EN
- Languages
English (GB)