Contact us to receive an offer.
| Manufacturer | KRAUSS MAFFEI |
|---|---|
| Model | KM 160-1000 PX |
| Year | 2018 |
| Location | Germany
|
This Krauss Maffei KM 160-1000 PX injection molding machine, manufactured in 2018, offers robust performance with a closing force of 1600 kN (160 tons). The machine features a platen size of 710 mm by 660 mm and tie bar spacing of 470 mm horizontally and 520 mm vertically, accommodating various mold sizes. It has an opening stroke of 950 mm and an ejector stroke of 150 mm with an ejector force of 33 kN, enabling efficient part ejection.
The injection unit is equipped with a 55 mm diameter screw, providing a shot volume of 523 cm³ and a shot weight of 297 grams. It operates at an injection pressure of up to 1904 bar. The screw length is 20 L/D, with a maximum screw speed of 243 min⁻¹ and torque of 827 Nm. The plasticizing unit supports a flow rate of 43 g/s (PS) and features six heating zones for precise temperature control.
Additional technical features include two pneumatic core pullers, a pressure accumulator to enhance injection performance, and low-wear plasticizing components. The machine includes interfaces such as EUROMAP 67 and a USB port, as well as connections for a temperature control unit. It is equipped with three freely programmable pneumatic inlets and outlets, two air valves, and a water cooling system.
The machine dimensions are approximately 6700 mm in length, 1600 mm in width, and 2300 mm in height, with a total weight of 10,900 kg. It includes levelling elements for stable installation.
The control panel features a touchscreen interface displaying the Krauss Maffei MC6 control system, with operational data and temperature settings visible. The panel also includes an emergency stop button and additional control buttons. The machine appears clean and well-maintained, with no visible damage. Hydraulic and electrical connections are visible at the rear, along with transparent fluid level indicators showing normal fluid levels. This setup is situated in a workshop environment, indicating readiness for industrial use.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Technical data closing side
Closing force: 1600 kN
Bar dimension v: 520 mm
Tie bar dimension h: 470 mm
Platen size h: 710 mm
Plate size v: 660 mm
Installation height min.: 200 mm
Installation height max.: 500 mm
Opening stroke: 950 mm
Ejector stroke: 150 mm
Ejector force: 33 kN
Technical data injection side
Screw diameter: 55 mm
Stroke volume: 523 ccm
Injection pressure: 1904 bar
Screw length: 20 l/d
Screw speed: 243 min
Screw torque: 827 N
Plasticising flow: 43 g/s PS
Injection flow into the atmosphere: 297 g/s PS
Number of heating zones: 6
2 x core pulling pneumatic
Dimensions & weight
Machine dimensions LxWxH: 6.7m x 1.6m x 2.3m
Total weight: 10900KG
Equipment
Screen text german
Pressure accumulator for increased injection performance
3 freely programmable inlets and outlets each
Air valve 2x
Machine with water battery
Levelling elements
Interface EUROMAP 67
Interface for temperature control unit
USB interface
Low-wear plasticising unit
Mould heating 24x
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
What is the closing force of this KRAUSS MAFFEI KM 160-1000 PX?
This KRAUSS MAFFEI KM 160-1000 PX injection moulding machine has a closing force of 1600 kN.
What are the bar dimensions of this machine?
This KRAUSS MAFFEI KM 160-1000 PX injection moulding machine features a bar dimension of 520 mm in the vertical direction and 470 mm in the horizontal direction.
What is the platen size of this KRAUSS MAFFEI KM 160-1000 PX?
This KRAUSS MAFFEI KM 160-1000 PX injection moulding machine has a platen size of 710 mm in height and 660 mm in width.
What is the installation height range for this machine?
This KRAUSS MAFFEI KM 160-1000 PX injection moulding machine has an installation height range from 200 mm to 500 mm.
What are the opening and ejector strokes of this machine?
This KRAUSS MAFFEI KM 160-1000 PX injection moulding machine has an opening stroke of 950 mm and an ejector stroke of 150 mm.
What is the ejector force of this KRAUSS MAFFEI KM 160-1000 PX?
This KRAUSS MAFFEI KM 160-1000 PX injection moulding machine has an ejector force of 33 kN.
What is the screw diameter and stroke volume of this machine?
This KRAUSS MAFFEI KM 160-1000 PX injection moulding machine features a screw diameter of 55 mm and a stroke volume of 523 ccm.
What is the injection pressure of this KRAUSS MAFFEI KM 160-1000 PX?
This KRAUSS MAFFEI KM 160-1000 PX injection moulding machine operates at an injection pressure of 1904 bar.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2007 |
| Offers online | 24 |
| Last activity | Oct. 30, 2026 |
Technical data closing side
Closing force: 1600 kN
Bar dimension v: 520 mm
Tie bar dimension h: 470 mm
Platen size h: 710 mm
Plate size v: 660 mm
Installation height min.: 200 mm
Installation height max.: 500 mm
Opening stroke: 950 mm
Ejector stroke: 150 mm
Ejector force: 33 kN
Technical data injection side
Screw diameter: 55 mm
Stroke volume: 523 ccm
Injection pressure: 1904 bar
Screw length: 20 l/d
Screw speed: 243 min
Screw torque: 827 N
Plasticising flow: 43 g/s PS
Injection flow into the atmosphere: 297 g/s PS
Number of heating zones: 6
2 x core pulling pneumatic
Dimensions & weight
Machine dimensions LxWxH: 6.7m x 1.6m x 2.3m
Total weight: 10900KG
Equipment
Screen text german
Pressure accumulator for increased injection performance
3 freely programmable inlets and outlets each
Air valve 2x
Machine with water battery
Levelling elements
Interface EUROMAP 67
Interface for temperature control unit
USB interface
Low-wear plasticising unit
Mould heating 24x
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
What is the closing force of this KRAUSS MAFFEI KM 160-1000 PX?
This KRAUSS MAFFEI KM 160-1000 PX injection moulding machine has a closing force of 1600 kN.
What are the bar dimensions of this machine?
This KRAUSS MAFFEI KM 160-1000 PX injection moulding machine features a bar dimension of 520 mm in the vertical direction and 470 mm in the horizontal direction.
What is the platen size of this KRAUSS MAFFEI KM 160-1000 PX?
This KRAUSS MAFFEI KM 160-1000 PX injection moulding machine has a platen size of 710 mm in height and 660 mm in width.
What is the installation height range for this machine?
This KRAUSS MAFFEI KM 160-1000 PX injection moulding machine has an installation height range from 200 mm to 500 mm.
What are the opening and ejector strokes of this machine?
This KRAUSS MAFFEI KM 160-1000 PX injection moulding machine has an opening stroke of 950 mm and an ejector stroke of 150 mm.
What is the ejector force of this KRAUSS MAFFEI KM 160-1000 PX?
This KRAUSS MAFFEI KM 160-1000 PX injection moulding machine has an ejector force of 33 kN.
What is the screw diameter and stroke volume of this machine?
This KRAUSS MAFFEI KM 160-1000 PX injection moulding machine features a screw diameter of 55 mm and a stroke volume of 523 ccm.
What is the injection pressure of this KRAUSS MAFFEI KM 160-1000 PX?
This KRAUSS MAFFEI KM 160-1000 PX injection moulding machine operates at an injection pressure of 1904 bar.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
This Krauss Maffei KM 160-1000 PX injection molding machine, manufactured in 2018, offers robust performance with a closing force of 1600 kN (160 tons). The machine features a platen size of 710 mm by 660 mm and tie bar spacing of 470 mm horizontally and 520 mm vertically, accommodating various mold sizes. It has an opening stroke of 950 mm and an ejector stroke of 150 mm with an ejector force of 33 kN, enabling efficient part ejection.
The injection unit is equipped with a 55 mm diameter screw, providing a shot volume of 523 cm³ and a shot weight of 297 grams. It operates at an injection pressure of up to 1904 bar. The screw length is 20 L/D, with a maximum screw speed of 243 min⁻¹ and torque of 827 Nm. The plasticizing unit supports a flow rate of 43 g/s (PS) and features six heating zones for precise temperature control.
Additional technical features include two pneumatic core pullers, a pressure accumulator to enhance injection performance, and low-wear plasticizing components. The machine includes interfaces such as EUROMAP 67 and a USB port, as well as connections for a temperature control unit. It is equipped with three freely programmable pneumatic inlets and outlets, two air valves, and a water cooling system.
The machine dimensions are approximately 6700 mm in length, 1600 mm in width, and 2300 mm in height, with a total weight of 10,900 kg. It includes levelling elements for stable installation.
The control panel features a touchscreen interface displaying the Krauss Maffei MC6 control system, with operational data and temperature settings visible. The panel also includes an emergency stop button and additional control buttons. The machine appears clean and well-maintained, with no visible damage. Hydraulic and electrical connections are visible at the rear, along with transparent fluid level indicators showing normal fluid levels. This setup is situated in a workshop environment, indicating readiness for industrial use.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2007 |
| Offers online | 24 |
| Last activity | Oct. 30, 2026 |
KRAUSS MAFFEI KM 160-1000 PX
Vstřikolis KRAUSS MAFFEI KM 160-1000 PX
KRAUSS MAFFEI KM 160-1000 PX
Wie neue KRAUSS MAFFEI KM 160-1000 PX Spritzgießmaschine
KRAUSS MAFFEI KM 160-1000 PX
Like new KRAUSS MAFFEI KM 160-1000 PX Injection moulding machine
Inyectora de plástico KRAUSS MAFFEI KM 160-1000 PX
Presse à injecter KRAUSS MAFFEI KM 160-1000 PX
KRAUSS MAFFEI KM 160-1000 PX
KRAUSS MAFFEI KM 160-1000 PX
Pressa ad iniezione KRAUSS MAFFEI KM 160-1000 PX
KRAUSS MAFFEI KM 160-1000 PX
KRAUSS MAFFEI KM 160-1000 PX
Wtryskarka KRAUSS MAFFEI KM 160-1000 PX
KRAUSS MAFFEI KM 160-1000 PX
KRAUSS MAFFEI KM 160-1000 PX
KRAUSS MAFFEI KM 160-1000 PX Термопластавтомат
KRAUSS MAFFEI KM 160-1000 PX
KRAUSS MAFFEI KM 160-1000 PX
Enjeksiyon kalıplama makinesi KRAUSS MAFFEI KM 160-1000 PX
EN
- Languages
English (GB)