Contact us to receive an offer.
| Category | Thermoforming - Form, Fill and Seal (FFS) lines |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | yes |
| status | visible |
| Last availability date | 12/10/2026 |
| Product id | P260910027 |
| Language |
Manufacturer: KRAMER + GREBE
Model: TIROMAT 3000/430
Year manufactured: 1991
Type: Thermoforming (form, fill and seal) packaging machine
Application: Food / dairy packaging
Film width: 430 mm
Description:
Used TIROMAT 3000/430 thermoforming packaging machine previously employed for food and dairy product packaging. The unit was removed from production and has been stored since—now offered for sale due to equipment renewal. Additional photos and technical information are available on request.
Included components and accessories (as observed):
- Long stainless steel conveyor/frame with a black conveyor belt and a return section.
- Upper sealing/heat unit positioned over the conveyor.
- Film handling: a yellow film roll mounted above the conveyor near the center and a clear plastic film roll mounted on a spindle at the lower assembly.
- Series of rollers and metal guide shafts, including a black rubber roller and a pneumatic cylinder/actuator attached to the roller assembly.
- Control/interface elements on a stainless cabinet, including a red emergency stop button and other control buttons.
- Tall stainless cabinet/enclosure with manufacturer nameplate (KRÄMER + GREBE and ALFA-LAVAL shown) and CE and GS stickers; an analog gauge/dial on the cabinet front; piping, wrapped hose connections and a pump or motor assembly at the cabinet base.
- Open electrical control cabinet containing relays, circuit breakers, terminal blocks and wiring (cabinet door shown open).
- Flexible white corrugated hose attached to the left side of the machine.
- Perforated stainless steel basket with handle mounted on the conveyor; multiple rectangular metal blocks stacked on the basket.
- Electrical/power cables and an extension cord located adjacent to the machine.
Condition notes:
The exterior and stainless components show surface dirt, residue, light soiling, discoloration, scratches and scuff marks consistent with prior production use and storage. No obvious major structural damage was observed in the photographed areas, but visual condition varies across components; prospective buyers should inspect the machine in person or request further detailed photos and documentation.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Used TIROMAT 3000/430 thermoforming packaging machine, previously used for food and dairy product packaging.
The machine was fully operational when taken out of production and was replaced due to the installation of newer packaging equipment.
It has been stored since being removed from production and is now available for sale due to equipment renewal.
Machine details:
Manufacturer: TIROMAT
Model: 3000/430
Type: Thermoforming packaging machine
Application: Food / dairy packaging
Film width: 430 mm
Condition: Used – operational when removed from production
Location: Thessaloniki, Greece
Additional photos, technical information and details of the installed equipment are available upon request.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Factory – large company |
| Active since | 2026 |
| Offers online | 2 |
| Last activity | Oct. 12, 2026 |
Used TIROMAT 3000/430 thermoforming packaging machine, previously used for food and dairy product packaging.
The machine was fully operational when taken out of production and was replaced due to the installation of newer packaging equipment.
It has been stored since being removed from production and is now available for sale due to equipment renewal.
Machine details:
Manufacturer: TIROMAT
Model: 3000/430
Type: Thermoforming packaging machine
Application: Food / dairy packaging
Film width: 430 mm
Condition: Used – operational when removed from production
Location: Thessaloniki, Greece
Additional photos, technical information and details of the installed equipment are available upon request.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Category | Thermoforming - Form, Fill and Seal (FFS) lines |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | yes |
| status | visible |
| Last availability date | 12/10/2026 |
| Product id | P260910027 |
| Language |
Manufacturer: KRAMER + GREBE
Model: TIROMAT 3000/430
Year manufactured: 1991
Type: Thermoforming (form, fill and seal) packaging machine
Application: Food / dairy packaging
Film width: 430 mm
Description:
Used TIROMAT 3000/430 thermoforming packaging machine previously employed for food and dairy product packaging. The unit was removed from production and has been stored since—now offered for sale due to equipment renewal. Additional photos and technical information are available on request.
Included components and accessories (as observed):
- Long stainless steel conveyor/frame with a black conveyor belt and a return section.
- Upper sealing/heat unit positioned over the conveyor.
- Film handling: a yellow film roll mounted above the conveyor near the center and a clear plastic film roll mounted on a spindle at the lower assembly.
- Series of rollers and metal guide shafts, including a black rubber roller and a pneumatic cylinder/actuator attached to the roller assembly.
- Control/interface elements on a stainless cabinet, including a red emergency stop button and other control buttons.
- Tall stainless cabinet/enclosure with manufacturer nameplate (KRÄMER + GREBE and ALFA-LAVAL shown) and CE and GS stickers; an analog gauge/dial on the cabinet front; piping, wrapped hose connections and a pump or motor assembly at the cabinet base.
- Open electrical control cabinet containing relays, circuit breakers, terminal blocks and wiring (cabinet door shown open).
- Flexible white corrugated hose attached to the left side of the machine.
- Perforated stainless steel basket with handle mounted on the conveyor; multiple rectangular metal blocks stacked on the basket.
- Electrical/power cables and an extension cord located adjacent to the machine.
Condition notes:
The exterior and stainless components show surface dirt, residue, light soiling, discoloration, scratches and scuff marks consistent with prior production use and storage. No obvious major structural damage was observed in the photographed areas, but visual condition varies across components; prospective buyers should inspect the machine in person or request further detailed photos and documentation.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – large company |
| Active since | 2026 |
| Offers online | 2 |
| Last activity | Oct. 12, 2026 |