Contact us to receive an offer.
| Manufacturer | Kovosvit MAS |
|---|---|
| Model | VR 2 |
| Year | |
| Location | Czech Republic
|
Item: Kovosvit MAS VR 2 — radial drilling machine
Basic parameters provided: drilling capacity 25.0 mm; spindle taper Morse 3. Manufacturer and model: Kovosvit MAS, VR 2. Category: radial drilling machine.
Included/visible components and features (as noted): a vertical column with a large rotating head and radial arm; spindle head with drive motor located at the left side of the head and a vertical quill assembly; a control panel/feed mechanism on the left side of the head; a tooling/holding block attached near the spindle area; machine marking with MAS/VR2 identification on the housing.
Condition notes: paint wear and corrosion spots are present on the housing. Rust and grime are visible on the base and working surfaces, and there is general surface wear consistent with long-term use. Electrical cables, hoses or wiring are observed draped or loosely arranged on/around the machine; this may present a trip or electrical hazard and should be addressed.
Seller note (from current description): the machine is reported to be in good technical condition; inspection is available by appointment. Prospective buyers should verify mechanical and electrical condition during an inspection or prior to purchase. No additional numeric specifications (year, motor power, spindle speeds, dimensions, operating hours) are provided in the listing.
What’s not included here: any claims of testing, refurbishment, warranty or guaranteed working condition are not stated beyond the seller’s note; please request further documentation, test runs, or a formal condition report if required.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Type: VR 2
Parameters: 25 mm, Morse 3
Manufacturer: Kovosvit MAS
Year of manufacture/SO/GO: -/-/-
Description: The machine is in good technical condition, inspection available by appointment.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2020 |
| Offers online | 479 |
| Last activity | Oct. 31, 2026 |
Type: VR 2
Parameters: 25 mm, Morse 3
Manufacturer: Kovosvit MAS
Year of manufacture/SO/GO: -/-/-
Description: The machine is in good technical condition, inspection available by appointment.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Item: Kovosvit MAS VR 2 — radial drilling machine
Basic parameters provided: drilling capacity 25.0 mm; spindle taper Morse 3. Manufacturer and model: Kovosvit MAS, VR 2. Category: radial drilling machine.
Included/visible components and features (as noted): a vertical column with a large rotating head and radial arm; spindle head with drive motor located at the left side of the head and a vertical quill assembly; a control panel/feed mechanism on the left side of the head; a tooling/holding block attached near the spindle area; machine marking with MAS/VR2 identification on the housing.
Condition notes: paint wear and corrosion spots are present on the housing. Rust and grime are visible on the base and working surfaces, and there is general surface wear consistent with long-term use. Electrical cables, hoses or wiring are observed draped or loosely arranged on/around the machine; this may present a trip or electrical hazard and should be addressed.
Seller note (from current description): the machine is reported to be in good technical condition; inspection is available by appointment. Prospective buyers should verify mechanical and electrical condition during an inspection or prior to purchase. No additional numeric specifications (year, motor power, spindle speeds, dimensions, operating hours) are provided in the listing.
What’s not included here: any claims of testing, refurbishment, warranty or guaranteed working condition are not stated beyond the seller’s note; please request further documentation, test runs, or a formal condition report if required.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2020 |
| Offers online | 479 |
| Last activity | Oct. 31, 2026 |
Радиално-пробивна машина Kovosvit MAS VR 2
Radiální vrtačka Kovosvit MAS VR 2
Kovosvit MAS VR 2 Radialboremaskine
Kovosvit MAS VR 2 Radialbohrmaschine
Ακτινικό δράπανο Kovosvit MAS VR 2
Kovosvit MAS VR 2 Radial drilling machine
Taladro radial Kovosvit MAS VR 2
Perceuse radiale Kovosvit MAS VR 2
Radijalna bušilica Kovosvit MAS VR 2
Kovosvit MAS VR 2 Radiál fúrógép
Trapano radiale Kovosvit MAS VR 2
Kovosvit MAS VR 2 Radialinė gręžimo staklė
Kovosvit MAS VR 2 Radiaalboormachine
Wiertarka promieniowa Kovosvit MAS VR 2
Furadeira radial Kovosvit MAS VR 2
Mașină de găurit radială Kovosvit MAS VR 2
Kovosvit MAS VR 2 Радиально-сверлильный станок
Radijalna bušilica Kovosvit MAS VR 2
Kovosvit MAS VR 2 Radialborrmaskin
Radyal matkap tezgâhı Kovosvit MAS VR 2
EN
- Languages
English (GB)