24,000 €
Make an offerContact us to receive an offer.
| ------------------- | |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | |
| Last availability date | 14/04/2026 |
For sale are two KOCH wire drawing machines, model 4/6 drums, equipped with 600mm drums. These machines are designed for wire drawing processes and come with multiple wire drawing dies, each protected by yellow mesh guards to enhance operator safety. The machines feature control boxes attached to each section, allowing for operational management.
The machines are mounted on large vertical metal frames, which include motor and gearbox assemblies. A handwheel is attached to the gearbox for manual operation, providing additional control options. Metal lever or foot pedal mechanisms are visible near the machine bases, likely contributing to operational functionality.
Included with the machines is a decoiler compatible with wire rod, facilitating wire feeding into the drawing process.
Regarding condition, the machines exhibit signs of surface rust and dirt accumulation, with some wear visible on the wire drawing dies and protective guards, including chipped paint and rust on die surfaces. Despite these signs of aging and wear, the structural integrity of the machines appears intact. One of the machines shows a cleaner and better-maintained appearance compared to the other. The floor area around the machines is somewhat cluttered with dust and debris, and various metal parts and components are stored around the frames.
These KOCH 4/6 drums wire drawing machines are suitable for buyers looking for industrial wire drawing equipment with visible wear consistent with used machinery. Further inspection is recommended to assess operational status and maintenance requirements.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Two KOCH 4/6-stand wire drawing machines for sale. 600 mm drums.
The machine comes with a wire rod uncoiler.
In good working condition.
The drawing machine consists of 6 blocks (3 sets of 2 drums)
The drawing machine comes with a wire rod unwinding stand and either a vertical winder or a spooler for 1-ton spools, depending on the customer’s preference.
No control system included. To be built by the buyer.
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
What components are included with this KOCH wire drawing machine?
This KOCH 4/6 drums wire drawing machine is complete and includes wire rod deflaters.
What is the condition of the machine?
This equipment is in good condition.
Is this KOCH wire drawing machine ready for loading?
This KOCH wire drawing machine is dismantled and ready for loading.
How many blocks does this KOCH 4/6 drums wire drawing machine have?
This KOCH 4/6 drums wire drawing machine consists of 6 blocks (3x 2 drums).
What does this equipment include for unwinding wire rod?
This equipment includes a stand for unwinding wire rod.
What options are available for this KOCH 4/6 drums wire drawing machine?
This KOCH 4/6 drums wire drawing machine comes with either a vertical winder or a spooler for ton-sized spools.
Does this machine have a control system?
The machine does not have a control system; it is to be custom made.
How many modules and drawing drums does this KOCH wire drawing machine have?
This KOCH wire drawing machine consists of three modules with two drawing drums each.
Can this equipment transfer wire directly between drums?
This equipment allows for direct wire transfer from one drum to another without passing through a post.
What wire rod diameters can this KOCH machine process?
This KOCH machine can process wire rod with diameters ranging from 5.5 mm to 6.5 mm.
What is the minimum wire diameter that can be produced from a 5.5 mm rod?
From a 5.5 mm wire rod, it is possible to directly produce 2.0 mm wire.
What is the production capacity of this machine for 3.0 mm wire?
This machine has a production capacity of approximately 6 tons of 3.0 mm wire in 8 hours.
What options are available for winding wire on this KOCH wire drawing machine?
This KOCH wire drawing machine can be equipped with a vertical winder that coils wire into rosettes or a spooler that winds wire onto removable spools.
Does this equipment come with a wire rod uncoiler?
This equipment includes a wire rod uncoiler (post).
Does this machine require customization for electrical control?
This machine does not have electrical control and must be customized according to user needs.
Was this unit operational before it was dismantled?
The unit has been dismantled from production and was operational until the end.
What is the diameter of the drums on this KOCH wire drawing machine?
This KOCH wire drawing machine features drum diameters of 600 mm.
Is there an option for cooling installation with this equipment?
This equipment has the option for cooling installation.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2016 |
| Offers online | 2 |
| Last activity | April 21, 2026 |
Two KOCH 4/6-stand wire drawing machines for sale. 600 mm drums.
The machine comes with a wire rod uncoiler.
In good working condition.
The drawing machine consists of 6 blocks (3 sets of 2 drums)
The drawing machine comes with a wire rod unwinding stand and either a vertical winder or a spooler for 1-ton spools, depending on the customer’s preference.
No control system included. To be built by the buyer.
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
What components are included with this KOCH wire drawing machine?
This KOCH 4/6 drums wire drawing machine is complete and includes wire rod deflaters.
What is the condition of the machine?
This equipment is in good condition.
Is this KOCH wire drawing machine ready for loading?
This KOCH wire drawing machine is dismantled and ready for loading.
How many blocks does this KOCH 4/6 drums wire drawing machine have?
This KOCH 4/6 drums wire drawing machine consists of 6 blocks (3x 2 drums).
What does this equipment include for unwinding wire rod?
This equipment includes a stand for unwinding wire rod.
What options are available for this KOCH 4/6 drums wire drawing machine?
This KOCH 4/6 drums wire drawing machine comes with either a vertical winder or a spooler for ton-sized spools.
Does this machine have a control system?
The machine does not have a control system; it is to be custom made.
How many modules and drawing drums does this KOCH wire drawing machine have?
This KOCH wire drawing machine consists of three modules with two drawing drums each.
Can this equipment transfer wire directly between drums?
This equipment allows for direct wire transfer from one drum to another without passing through a post.
What wire rod diameters can this KOCH machine process?
This KOCH machine can process wire rod with diameters ranging from 5.5 mm to 6.5 mm.
What is the minimum wire diameter that can be produced from a 5.5 mm rod?
From a 5.5 mm wire rod, it is possible to directly produce 2.0 mm wire.
What is the production capacity of this machine for 3.0 mm wire?
This machine has a production capacity of approximately 6 tons of 3.0 mm wire in 8 hours.
What options are available for winding wire on this KOCH wire drawing machine?
This KOCH wire drawing machine can be equipped with a vertical winder that coils wire into rosettes or a spooler that winds wire onto removable spools.
Does this equipment come with a wire rod uncoiler?
This equipment includes a wire rod uncoiler (post).
Does this machine require customization for electrical control?
This machine does not have electrical control and must be customized according to user needs.
Was this unit operational before it was dismantled?
The unit has been dismantled from production and was operational until the end.
What is the diameter of the drums on this KOCH wire drawing machine?
This KOCH wire drawing machine features drum diameters of 600 mm.
Is there an option for cooling installation with this equipment?
This equipment has the option for cooling installation.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| ------------------- | |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | |
| Last availability date | 14/04/2026 |
For sale are two KOCH wire drawing machines, model 4/6 drums, equipped with 600mm drums. These machines are designed for wire drawing processes and come with multiple wire drawing dies, each protected by yellow mesh guards to enhance operator safety. The machines feature control boxes attached to each section, allowing for operational management.
The machines are mounted on large vertical metal frames, which include motor and gearbox assemblies. A handwheel is attached to the gearbox for manual operation, providing additional control options. Metal lever or foot pedal mechanisms are visible near the machine bases, likely contributing to operational functionality.
Included with the machines is a decoiler compatible with wire rod, facilitating wire feeding into the drawing process.
Regarding condition, the machines exhibit signs of surface rust and dirt accumulation, with some wear visible on the wire drawing dies and protective guards, including chipped paint and rust on die surfaces. Despite these signs of aging and wear, the structural integrity of the machines appears intact. One of the machines shows a cleaner and better-maintained appearance compared to the other. The floor area around the machines is somewhat cluttered with dust and debris, and various metal parts and components are stored around the frames.
These KOCH 4/6 drums wire drawing machines are suitable for buyers looking for industrial wire drawing equipment with visible wear consistent with used machinery. Further inspection is recommended to assess operational status and maintenance requirements.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2016 |
| Offers online | 2 |
| Last activity | April 21, 2026 |
Машина за теглене на тел KOCH 4/6 drums
Drátotah KOCH 4/6 drums
KOCH 4/6 drums Trådtræksmaskine
KOCH 4/6 drums Drahtziehmaschine
Μηχανή σχεδίασης συρμάτων KOCH 4/6 drums
KOCH 4/6 drums Wire drawing machine
Máquina estiradora de hilos KOCH 4/6 drums
Etireuse de fils KOCH 4/6 drums
Stroj za izvlačenje žice KOCH 4/6 drums
KOCH 4/6 drums Huzalhúzó gép
Trafilatrice KOCH 4/6 drums
Vielos tempimo mašina KOCH 4/6 drums
KOCH 4/6 drums Draadtrekmachine
Ciągarka do drutu KOCH 4/6 drums
Máquina de trefilação KOCH 4/6 drums
Mașină de trefilat KOCH 4/6 drums
KOCH 4/6 drums Волочильный стан
Mašina za izvlačenje žice KOCH 4/6 drums
KOCH 4/6 drums Tråddragningsmaskin
Tel çekme makinesi KOCH 4/6 drums
EN
- Languages
English (GB)