Contact us to receive an offer.
| Manufacturer | Kitamura |
|---|---|
| Model | Mycenter-4XD |
| Year | 2014 |
| Location | United Kingdom
|
The Kitamura Mycenter-4XD is a vertical machining center manufactured in 2014, designed for precision and versatility in machining operations. It features a robust machine weight of 7300 kg and offers a substantial working envelope with traverse dimensions of 1100 mm on the X-axis, and 610 mm on both the Y and Z axes. The machine is equipped with a worktable measuring 1270 mm in length and 640 mm in width, capable of supporting a maximum workpiece weight of 1200 kg.
This machining center is fitted with a FANUC 0i-MD control system, which includes a control panel with a screen and multiple buttons and switches for efficient operation. The spindle can reach speeds up to 10,000 rpm, accommodating a maximum tool diameter of 74 mm, or up to 150 mm when adjacent pockets are empty. The tool magazine has a capacity of 30 stations, allowing for a wide range of tooling options, with a chip-to-chip tool change time of approximately 5 seconds. The machine uses BT50 tool holders, supporting tools up to 8 kg in weight and 300 mm in length.
Rapid feed rates for the XYZ axes are 36 m/min for X and Y, and 30 m/min for Z, with a maximum cutting feed rate of 24,000 mm/min. The spindle height can be adjusted between 100 mm and 710 mm, providing flexibility for various part sizes. The table includes five T-slots, each 18 mm wide, for secure workpiece mounting.
The machine features an enclosed work area with a visible spindle head and a worktable outfitted with multiple fixtures or vises. A chip conveyor system is attached to the left side of the machine, helping to efficiently remove metal chips during machining. The exterior shows signs of use and dirt, including a vertical mark below the Mycenter 4XD logo, but no major damage is visible. Additionally, tooling and tool holders are organized on a separate tool cart, indicating readiness for operation.
This machining center is powered by a 3-phase AC 200/220V 50/60 Hz power supply with a consumption of 35 KVA. The Kitamura Mycenter-4XD is a reliable solution for demanding machining tasks, combining substantial capacity with precise control and efficient tool handling.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Control
FANUC 0i-MD
Machine Weight
7300kg
Maximum Cutting Feedrate
24000mm/minute
Maximum Tool Diameter
74mm
Maximum Tool Diameter with Empty Adjacent Pockets
150mm
Maximum Tool Length
300mm
Maximum Tool Weight
8kg
Maximum workpiece weight
1200kg
Min - Max Height under Spindle
100 - 710mm
Rapid Feedrates
XYZ: 36 x 36 x 30m/minute
Spindle Speed
10000rpm
T- Slots
5 x 18mm
Table Size
1270 x 640mm
Tool Change Capacity
30 Station
Tool Change Time (Chip to Chip)
5 seconds
Tool Size
BT50
Traverses XYZ
1100 x 610 x 610mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
What are the traverse dimensions of this Kitamura Mycenter-4XD?
This Kitamura Mycenter-4XD vertical machining center has a traverse of 1100mm in the X-axis, 610mm in the Y-axis, and 610mm in the Z-axis.
What is the table size of the machine?
The unit features a table size of 1270mm x 640mm.
What is the table load capacity of this Kitamura Mycenter-4XD?
This Kitamura Mycenter-4XD has a table load capacity of 1200kgs.
What is the spindle taper of the machine?
The spindle taper of this equipment is BT50.
What is the spindle speed of this Kitamura Mycenter-4XD?
This Kitamura Mycenter-4XD has a spindle speed of 10,000rpm.
How many stations does the tool changer have?
The unit includes a 30-station tool changer.
What year was this Kitamura Mycenter-4XD manufactured?
This Kitamura Mycenter-4XD was manufactured in 2014.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2009 |
| Offers online | 174 |
| Last activity | Nov. 2, 2026 |
Control
FANUC 0i-MD
Machine Weight
7300kg
Maximum Cutting Feedrate
24000mm/minute
Maximum Tool Diameter
74mm
Maximum Tool Diameter with Empty Adjacent Pockets
150mm
Maximum Tool Length
300mm
Maximum Tool Weight
8kg
Maximum workpiece weight
1200kg
Min - Max Height under Spindle
100 - 710mm
Rapid Feedrates
XYZ: 36 x 36 x 30m/minute
Spindle Speed
10000rpm
T- Slots
5 x 18mm
Table Size
1270 x 640mm
Tool Change Capacity
30 Station
Tool Change Time (Chip to Chip)
5 seconds
Tool Size
BT50
Traverses XYZ
1100 x 610 x 610mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
What are the traverse dimensions of this Kitamura Mycenter-4XD?
This Kitamura Mycenter-4XD vertical machining center has a traverse of 1100mm in the X-axis, 610mm in the Y-axis, and 610mm in the Z-axis.
What is the table size of the machine?
The unit features a table size of 1270mm x 640mm.
What is the table load capacity of this Kitamura Mycenter-4XD?
This Kitamura Mycenter-4XD has a table load capacity of 1200kgs.
What is the spindle taper of the machine?
The spindle taper of this equipment is BT50.
What is the spindle speed of this Kitamura Mycenter-4XD?
This Kitamura Mycenter-4XD has a spindle speed of 10,000rpm.
How many stations does the tool changer have?
The unit includes a 30-station tool changer.
What year was this Kitamura Mycenter-4XD manufactured?
This Kitamura Mycenter-4XD was manufactured in 2014.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
The Kitamura Mycenter-4XD is a vertical machining center manufactured in 2014, designed for precision and versatility in machining operations. It features a robust machine weight of 7300 kg and offers a substantial working envelope with traverse dimensions of 1100 mm on the X-axis, and 610 mm on both the Y and Z axes. The machine is equipped with a worktable measuring 1270 mm in length and 640 mm in width, capable of supporting a maximum workpiece weight of 1200 kg.
This machining center is fitted with a FANUC 0i-MD control system, which includes a control panel with a screen and multiple buttons and switches for efficient operation. The spindle can reach speeds up to 10,000 rpm, accommodating a maximum tool diameter of 74 mm, or up to 150 mm when adjacent pockets are empty. The tool magazine has a capacity of 30 stations, allowing for a wide range of tooling options, with a chip-to-chip tool change time of approximately 5 seconds. The machine uses BT50 tool holders, supporting tools up to 8 kg in weight and 300 mm in length.
Rapid feed rates for the XYZ axes are 36 m/min for X and Y, and 30 m/min for Z, with a maximum cutting feed rate of 24,000 mm/min. The spindle height can be adjusted between 100 mm and 710 mm, providing flexibility for various part sizes. The table includes five T-slots, each 18 mm wide, for secure workpiece mounting.
The machine features an enclosed work area with a visible spindle head and a worktable outfitted with multiple fixtures or vises. A chip conveyor system is attached to the left side of the machine, helping to efficiently remove metal chips during machining. The exterior shows signs of use and dirt, including a vertical mark below the Mycenter 4XD logo, but no major damage is visible. Additionally, tooling and tool holders are organized on a separate tool cart, indicating readiness for operation.
This machining center is powered by a 3-phase AC 200/220V 50/60 Hz power supply with a consumption of 35 KVA. The Kitamura Mycenter-4XD is a reliable solution for demanding machining tasks, combining substantial capacity with precise control and efficient tool handling.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2009 |
| Offers online | 174 |
| Last activity | Nov. 2, 2026 |
Вертикален обработващ център Kitamura Mycenter-4XD
Vertikální obráběcí centrum Kitamura Mycenter-4XD
Kitamura Mycenter-4XD Lodret bearbejdningscenter
Kitamura Mycenter-4XD Vertikales Bearbeitungszentrum
Κάθετο κέντρο κατεργασίας Kitamura Mycenter-4XD
Kitamura Mycenter-4XD Vertical machining center
Centro de mecanizado vertical Kitamura Mycenter-4XD
Centre d'usinage vertical Kitamura Mycenter-4XD
Vertikalni obradni centar Kitamura Mycenter-4XD
Kitamura Mycenter-4XD Függőleges megmunkáló központ
Centro di lavoro verticale Kitamura Mycenter-4XD
Kitamura Mycenter-4XD Vertikalus apdirbimo centras
Kitamura Mycenter-4XD Verticaal bewerkingscentrum
Pionowe centrum obróbcze Kitamura Mycenter-4XD
Centro de usinagem vertical Kitamura Mycenter-4XD
Centru de prelucrare vertical Kitamura Mycenter-4XD
Kitamura Mycenter-4XD Вертикальный обрабатывающий центр
Vertikalni obradni centar Kitamura Mycenter-4XD
Kitamura Mycenter-4XD Vertikalt bearbetningscenter
Dikey işleme merkezi Kitamura Mycenter-4XD
EN
- Languages
English (GB)