| Manufacturer | KFP |
|---|---|
| Model | Tunnel di lavaggio |
| Year | 2016 |
| Location | Italy
|
MORO tunnel finishing equipment for washing, degreasing, passivating and drying metal components, manufactured in 2016. The listing describes two tunnel lines and states that the equipment is new and has never been assembled. It is a long, green, connected tunnel-style machine with a roller conveyor visible at the front entrance and along the machine. Stainless-steel lower enclosures are fitted along the equipment, with pipes, valves and pressure gauges visible.
The machine is equipped with a 950 mm-wide crimped wire-mesh conveyor belt. The listing gives the conveyor operating speed as 0.4 m/min and a maximum belt load of 15 kg/m². The process equipment includes a pretreatment tunnel, an oven operating at 120°C with 50 kW power, and a drying system with two centrifugal hot-air fans rated at 5,000 m³/h and 4 kW each. Other listed equipment includes a vapor exhaust stack with a MORO MN 302 extraction fan and an electrical control panel. The stated cycle time is 7.5 minutes.
Please note that the supplied information gives the speed as 0.4 m/min in the description, while the known-field speed is recorded as 0.4 rpm; these values are not consistent. Also, although the listing states that the machine is new and never assembled, its visible surfaces and surrounding base appear dusty and dirty, with debris present. Buyers should take this apparent condition discrepancy into account.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
2 tunnel lines for washing, degreasing, passivating and drying metal components. New, never assembled. Year of manufacture: 2016. Equipped with a 950 mm wide crimped wire mesh conveyor belt, operating at 0.4 m/min. Includes pretreatment tunnel, oven (120°C, 50 kW), drying system (2 centrifugal hot-air fans, 5,000 m³/h, 4 kW each), vapor exhaust stack with MORO MN 302 extraction fan, and electrical control panel. Cycle time: 7.5 minutes. Max conveyor belt load: 15 kg/m².
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2018 |
| Offers online | 18 |
| Last activity | Nov. 12, 2026 |
Valmatrading GmbH, headquartered in Villach, Austria, is a trusted name in the international market for metalworking machinery. With years of industry expertise, the company offers a carefully curated selection of both new and used equipment, ranging from CNC machines and lathes to hydraulic and mechanical presses. Their commitment goes beyond just selling machines—they deliver full-service solutions tailored to the needs of industrial clients.
Valmatrading distinguishes itself with comprehensive support services including dismantling, reassembly, electrical and mechanical adjustments, CE certification, and even complete plant relocations. Whether you're looking to purchase high-quality machinery or sell surplus equipment, Valmatrading ensures a smooth and professional process from start to finish.
Their global reach and personalized approach make them a reliable partner for manufacturers and dealers alike. With a strong reputation for efficiency and transparency, Valmatrading GmbH is a solid choice for anyone looking to invest in or offload industrial machinery.
2 tunnel lines for washing, degreasing, passivating and drying metal components. New, never assembled. Year of manufacture: 2016. Equipped with a 950 mm wide crimped wire mesh conveyor belt, operating at 0.4 m/min. Includes pretreatment tunnel, oven (120°C, 50 kW), drying system (2 centrifugal hot-air fans, 5,000 m³/h, 4 kW each), vapor exhaust stack with MORO MN 302 extraction fan, and electrical control panel. Cycle time: 7.5 minutes. Max conveyor belt load: 15 kg/m².
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
MORO tunnel finishing equipment for washing, degreasing, passivating and drying metal components, manufactured in 2016. The listing describes two tunnel lines and states that the equipment is new and has never been assembled. It is a long, green, connected tunnel-style machine with a roller conveyor visible at the front entrance and along the machine. Stainless-steel lower enclosures are fitted along the equipment, with pipes, valves and pressure gauges visible.
The machine is equipped with a 950 mm-wide crimped wire-mesh conveyor belt. The listing gives the conveyor operating speed as 0.4 m/min and a maximum belt load of 15 kg/m². The process equipment includes a pretreatment tunnel, an oven operating at 120°C with 50 kW power, and a drying system with two centrifugal hot-air fans rated at 5,000 m³/h and 4 kW each. Other listed equipment includes a vapor exhaust stack with a MORO MN 302 extraction fan and an electrical control panel. The stated cycle time is 7.5 minutes.
Please note that the supplied information gives the speed as 0.4 m/min in the description, while the known-field speed is recorded as 0.4 rpm; these values are not consistent. Also, although the listing states that the machine is new and never assembled, its visible surfaces and surrounding base appear dusty and dirty, with debris present. Buyers should take this apparent condition discrepancy into account.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2018 |
| Offers online | 18 |
| Last activity | Nov. 12, 2026 |
Valmatrading GmbH, headquartered in Villach, Austria, is a trusted name in the international market for metalworking machinery. With years of industry expertise, the company offers a carefully curated selection of both new and used equipment, ranging from CNC machines and lathes to hydraulic and mechanical presses. Their commitment goes beyond just selling machines—they deliver full-service solutions tailored to the needs of industrial clients.
Valmatrading distinguishes itself with comprehensive support services including dismantling, reassembly, electrical and mechanical adjustments, CE certification, and even complete plant relocations. Whether you're looking to purchase high-quality machinery or sell surplus equipment, Valmatrading ensures a smooth and professional process from start to finish.
Their global reach and personalized approach make them a reliable partner for manufacturers and dealers alike. With a strong reputation for efficiency and transparency, Valmatrading GmbH is a solid choice for anyone looking to invest in or offload industrial machinery.
Машина за довършителни работи MORO for WASHING, DEGREASING, PASSIVATING and DRYING METAL COMPONENTS
Dokončovací obráběcí stroj MORO for WASHING, DEGREASING, PASSIVATING and DRYING METAL COMPONENTS
MORO for WASHING, DEGREASING, PASSIVATING and DRYING METAL COMPONENTS Sletbearbejdningsmaskine
MORO for WASHING, DEGREASING, PASSIVATING and DRYING METAL COMPONENTS Werkzeugmaschine zur Endbearbeitung
Εργαλειομηχανή φινιρίσματος MORO for WASHING, DEGREASING, PASSIVATING and DRYING METAL COMPONENTS
MORO for WASHING, DEGREASING, PASSIVATING and DRYING METAL COMPONENTS Finishing machine-tool
Máquina-herramienta de acabado MORO for WASHING, DEGREASING, PASSIVATING and DRYING METAL COMPONENTS
Machine-outil de finition MORO for WASHING, DEGREASING, PASSIVATING and DRYING METAL COMPONENTS
Alatni stroj za završnu obradu MORO for WASHING, DEGREASING, PASSIVATING and DRYING METAL COMPONENTS
MORO for WASHING, DEGREASING, PASSIVATING and DRYING METAL COMPONENTS Befejező szerszámgép
Impianto a tunnel di lavaggio, sgrassaggio, passivazione e asciugatura
MORO for WASHING, DEGREASING, PASSIVATING and DRYING METAL COMPONENTS Apdailos staklės
MORO for WASHING, DEGREASING, PASSIVATING and DRYING METAL COMPONENTS Afwerkingsmachine
Obrabiarka wykańczająca MORO for WASHING, DEGREASING, PASSIVATING and DRYING METAL COMPONENTS
Máquina-ferramenta de acabamento MORO for WASHING, DEGREASING, PASSIVATING and DRYING METAL COMPONENTS
Mașini-unelte de finisare MORO for WASHING, DEGREASING, PASSIVATING and DRYING METAL COMPONENTS
MORO for WASHING, DEGREASING, PASSIVATING and DRYING METAL COMPONENTS Отделочный станок
Mašina za završnu obradu MORO for WASHING, DEGREASING, PASSIVATING and DRYING METAL COMPONENTS
MORO for WASHING, DEGREASING, PASSIVATING and DRYING METAL COMPONENTS Finbearbetningsmaskin
Bitirme makine takımı MORO for WASHING, DEGREASING, PASSIVATING and DRYING METAL COMPONENTS
EN
- Languages
English (GB)