Contact us to receive an offer.
| Manufacturer | KABEX |
|---|---|
| Model | AL-2500/KX |
| Year | 2013 |
| Location | Poland
|
| Category | Miscellaneous sheet metal machines |
| Length x width x height | 4500.0 × 2200.0 × 2100.0 |
| Weight | 2200 kg |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | |
| Last availability date | 03/11/2026 |
| Product id | P230615062 |
| Language |
KABEX AL-2500/KX
Tvářecí stroj KABEX AL-2500/KX
KABEX AL-2500/KX
KABEX AL-2500/KX Blechbearbeitungsmaschine
KABEX AL-2500/KX
KABEX AL-2500/KX Sheet metal machine
Máquina para deformación de chapa KABEX AL-2500/KX
Machine de tôlerie KABEX AL-2500/KX
KABEX AL-2500/KX
KABEX AL-2500/KX
Macchina per lavorazione lamiera KABEX AL-2500/KX
KABEX AL-2500/KX
KABEX AL-2500/KX
Maszyna do obróbki blach KABEX AL-2500/KX
KABEX AL-2500/KX
KABEX AL-2500/KX
KABEX AL-2500/KX Листопрокатный станок
KABEX AL-2500/KX
KABEX AL-2500/KX
Sac işleme makinası KABEX AL-2500/KX
|
The KABEX AL-2500/KX is a specialized machine designed for the production of knotted forest mesh. Manufactured in 2013, this equipment is engineered to produce durable mesh resistant to mechanical damage, with a maximum net length of up to 100 meters and a variety of wire cross-sections.
The machine has overall dimensions of 4500 mm in length, 2200 mm in width, and 2100 mm in height, and it weighs approximately 2200 kg. It requires a power supply of 400V and 50 Hz, with a total power consumption of 5.5 kW.
Key components of the AL-2500/KX include an unwinder frame, stands for wire rolls accommodating up to 53 pieces, a machine body, pulling and net winding drums, a guide shaft with a brake to enhance wire tension, and a tool table equipped with capping rollers, tubes, and wire guide plates. The machine also features wire feeders with wheels for precise wire length feeding, multiple screwing mechanisms, guillotines, wire bending clamps, and a reciprocating table to accurately arrange the mesh rolls side by side. Safety barriers with sensors are also part of the setup.
The weaving process involves feeding wire onto the mesh via the pulling drum, followed by the feeder delivering the correct wire length to the tool table for wrapping. Guillotines cut and bend wire tips simultaneously, while wire bending clamps assist in shaping the wire ends. The curling shaft then makes eight turns to form the appropriate curl before the cycle repeats. The machine can perform up to 50 such cycles per minute.
The AL-2500/KX produces mesh with a height range from 0.3 to 2.5 meters, with wire counts between 29 and 53 pieces and wire diameters ranging from 1.6 to 3 mm. Wire spacing options include 16x5 cm, 3x10 cm, 2x15 cm, 3x20 cm, and 2x25 cm. The maximum forming speed is 1.5 m/min, with cutting length accuracy of ±1 mm. The net roll winding mechanism uses a smooth drum with a net blocking feature, and net roll cutting is manual after winding the desired length.
The machine is equipped with a PLC controller (ARRAY APB-22-MRDL), SH-300 operator panel, and several geared motors for different functions: feeder (1.5 kW, 83 rpm), turning (5.5 kW, 83 rpm), drum (2.2 kW, 15 rpm), and guillotine (4 kW, 90 rpm).
From the images, the machine appears clean and well-maintained, featuring a control panel with buttons and a display screen on the left side. A prominent yellow rotating drum with multiple hooks or pins for wire handling is visible, along with a robust metal frame supporting the entire structure. Multiple wires extend from the machine, consistent with its wire feeding and mesh production functions. No visible damage or significant wear is apparent on the machine parts.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
The line for the production of forest mesh AL-2500/KX, built in 2013 by KABEX P.P.H.U., produces a durable and resistant to mechanical damage mesh with a maximum length of 100 meters and a diverse cross-section of wires.
The AL 2500 KX forest mesh machine consists of:
- unwinder frame (1 pc),
- stand for wire rolls (53 pcs.),
- unwinding basket (53 pcs.),
- machine body (1 set),
- pulling drum (1 pc.),
- net winding drum (1 item),
- a guide shaft with a brake to increase the tension of the wire (1 pc.),
- tool table with capping rollers, tubes and wire guide plates (1 item),
- wire feeder with wheels feeding the appropriate length of wire to the tool table for wrapping it in the net (1 set),
- screwing mechanisms (27 sets),
- guillotines (26 sets),
- wire bending clamps (27 sets),
- a table that lays the net, performing a reciprocating movement in order to precisely arrange the rolls of the net next to each other (1 item),
- safety barriers with a sensor (2 pcs.).
The weaving of the mesh begins with feeding a certain amount of wire onto the mesh by the pulling drum, followed by the start of the feeder responsible for feeding the appropriate length of wire to the tool table of the machine in order to wrap it in the mesh. In the next stage, the guillotine simultaneously cuts the wire and bends its tip with the tip of the knife. At the same time, the wire bending fingers work together with the guillotine, which bend the other end of the cut wire section.
While the guillotine and the bending fingers move away, the curling shaft makes 8 turns in order to make the appropriate number of turns of the curl. Finally, the guillotine returns to its initial position, which restarts the entire meshing cycle from the beginning. The AL-2500/KX knotted forest mesh production machine performs a maximum of 50 such cycles per minute.
Technical data of the machine for the production of knotted mesh AL-2500/KX
- height range of the produced net: 0.3-2.5 m
- length of the net produced: 50 or 100 m
- number of wires: 29-53 pcs.
- range of wire diameters: 1.6-3 mm
- spacing of wires in the mesh: 16x5 cm, 3x10 cm, 2x15 cm, 3x20 cm, 2x25 cm
- maximum forming speed: 1.5 m/min
- cutting length accuracy: ± 1 mm
- net roll winding mechanism: smooth drum with net blocking mechanism in the shaft
- net closing mechanism: wrapper, guillotine, bending claw
- cutting the net roll: manual (after winding the desired length of the net)
- power consumption: 5.5 kW
- power supply: 400V; 50 Hz
- space requirement (with unwinder): approx. 170 m2
- dimensions (length x width x height): 4500 x 2200 x 2100 mm
- machine weight AL 2500/KX: 2200 kg
Equipment for the machine for the production of forest mesh AL-2500/KX
- PLC controller: ARRAY APB-22-MRDL
- SH-300 operator panel
- geared motor (feeder): 1.5 kW, 83 rpm
- geared motor (turning): 5.5 kW, 83 rpm
- gear motor (drum): 2.2 kW, 15 rpm
- geared motor (guillotine): 4 kW, 90 rpm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2010 |
| Offers online | 424 |
| Last activity | Nov. 7, 2026 |
The line for the production of forest mesh AL-2500/KX, built in 2013 by KABEX P.P.H.U., produces a durable and resistant to mechanical damage mesh with a maximum length of 100 meters and a diverse cross-section of wires.
The AL 2500 KX forest mesh machine consists of:
- unwinder frame (1 pc),
- stand for wire rolls (53 pcs.),
- unwinding basket (53 pcs.),
- machine body (1 set),
- pulling drum (1 pc.),
- net winding drum (1 item),
- a guide shaft with a brake to increase the tension of the wire (1 pc.),
- tool table with capping rollers, tubes and wire guide plates (1 item),
- wire feeder with wheels feeding the appropriate length of wire to the tool table for wrapping it in the net (1 set),
- screwing mechanisms (27 sets),
- guillotines (26 sets),
- wire bending clamps (27 sets),
- a table that lays the net, performing a reciprocating movement in order to precisely arrange the rolls of the net next to each other (1 item),
- safety barriers with a sensor (2 pcs.).
The weaving of the mesh begins with feeding a certain amount of wire onto the mesh by the pulling drum, followed by the start of the feeder responsible for feeding the appropriate length of wire to the tool table of the machine in order to wrap it in the mesh. In the next stage, the guillotine simultaneously cuts the wire and bends its tip with the tip of the knife. At the same time, the wire bending fingers work together with the guillotine, which bend the other end of the cut wire section.
While the guillotine and the bending fingers move away, the curling shaft makes 8 turns in order to make the appropriate number of turns of the curl. Finally, the guillotine returns to its initial position, which restarts the entire meshing cycle from the beginning. The AL-2500/KX knotted forest mesh production machine performs a maximum of 50 such cycles per minute.
Technical data of the machine for the production of knotted mesh AL-2500/KX
- height range of the produced net: 0.3-2.5 m
- length of the net produced: 50 or 100 m
- number of wires: 29-53 pcs.
- range of wire diameters: 1.6-3 mm
- spacing of wires in the mesh: 16x5 cm, 3x10 cm, 2x15 cm, 3x20 cm, 2x25 cm
- maximum forming speed: 1.5 m/min
- cutting length accuracy: ± 1 mm
- net roll winding mechanism: smooth drum with net blocking mechanism in the shaft
- net closing mechanism: wrapper, guillotine, bending claw
- cutting the net roll: manual (after winding the desired length of the net)
- power consumption: 5.5 kW
- power supply: 400V; 50 Hz
- space requirement (with unwinder): approx. 170 m2
- dimensions (length x width x height): 4500 x 2200 x 2100 mm
- machine weight AL 2500/KX: 2200 kg
Equipment for the machine for the production of forest mesh AL-2500/KX
- PLC controller: ARRAY APB-22-MRDL
- SH-300 operator panel
- geared motor (feeder): 1.5 kW, 83 rpm
- geared motor (turning): 5.5 kW, 83 rpm
- gear motor (drum): 2.2 kW, 15 rpm
- geared motor (guillotine): 4 kW, 90 rpm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Category | Miscellaneous sheet metal machines |
| Length x width x height | 4500.0 × 2200.0 × 2100.0 |
| Weight | 2200 kg |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | |
| Last availability date | 03/11/2026 |
| Product id | P230615062 |
| Language |
KABEX AL-2500/KX
Tvářecí stroj KABEX AL-2500/KX
KABEX AL-2500/KX
KABEX AL-2500/KX Blechbearbeitungsmaschine
KABEX AL-2500/KX
KABEX AL-2500/KX Sheet metal machine
Máquina para deformación de chapa KABEX AL-2500/KX
Machine de tôlerie KABEX AL-2500/KX
KABEX AL-2500/KX
KABEX AL-2500/KX
Macchina per lavorazione lamiera KABEX AL-2500/KX
KABEX AL-2500/KX
KABEX AL-2500/KX
Maszyna do obróbki blach KABEX AL-2500/KX
KABEX AL-2500/KX
KABEX AL-2500/KX
KABEX AL-2500/KX Листопрокатный станок
KABEX AL-2500/KX
KABEX AL-2500/KX
Sac işleme makinası KABEX AL-2500/KX
|
The KABEX AL-2500/KX is a specialized machine designed for the production of knotted forest mesh. Manufactured in 2013, this equipment is engineered to produce durable mesh resistant to mechanical damage, with a maximum net length of up to 100 meters and a variety of wire cross-sections.
The machine has overall dimensions of 4500 mm in length, 2200 mm in width, and 2100 mm in height, and it weighs approximately 2200 kg. It requires a power supply of 400V and 50 Hz, with a total power consumption of 5.5 kW.
Key components of the AL-2500/KX include an unwinder frame, stands for wire rolls accommodating up to 53 pieces, a machine body, pulling and net winding drums, a guide shaft with a brake to enhance wire tension, and a tool table equipped with capping rollers, tubes, and wire guide plates. The machine also features wire feeders with wheels for precise wire length feeding, multiple screwing mechanisms, guillotines, wire bending clamps, and a reciprocating table to accurately arrange the mesh rolls side by side. Safety barriers with sensors are also part of the setup.
The weaving process involves feeding wire onto the mesh via the pulling drum, followed by the feeder delivering the correct wire length to the tool table for wrapping. Guillotines cut and bend wire tips simultaneously, while wire bending clamps assist in shaping the wire ends. The curling shaft then makes eight turns to form the appropriate curl before the cycle repeats. The machine can perform up to 50 such cycles per minute.
The AL-2500/KX produces mesh with a height range from 0.3 to 2.5 meters, with wire counts between 29 and 53 pieces and wire diameters ranging from 1.6 to 3 mm. Wire spacing options include 16x5 cm, 3x10 cm, 2x15 cm, 3x20 cm, and 2x25 cm. The maximum forming speed is 1.5 m/min, with cutting length accuracy of ±1 mm. The net roll winding mechanism uses a smooth drum with a net blocking feature, and net roll cutting is manual after winding the desired length.
The machine is equipped with a PLC controller (ARRAY APB-22-MRDL), SH-300 operator panel, and several geared motors for different functions: feeder (1.5 kW, 83 rpm), turning (5.5 kW, 83 rpm), drum (2.2 kW, 15 rpm), and guillotine (4 kW, 90 rpm).
From the images, the machine appears clean and well-maintained, featuring a control panel with buttons and a display screen on the left side. A prominent yellow rotating drum with multiple hooks or pins for wire handling is visible, along with a robust metal frame supporting the entire structure. Multiple wires extend from the machine, consistent with its wire feeding and mesh production functions. No visible damage or significant wear is apparent on the machine parts.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2010 |
| Offers online | 424 |
| Last activity | Nov. 7, 2026 |
Denmark
2026
Poland
2023
Poland
1995
Poland
2019
Poland
2015
United Kingdom
2020
Italy
2017
Turkey
2005
Czech Republic
2000
| Working width | 1600 mm |
|---|---|
| Working length | 6250 mm |
| Working height | 1600 mm |
|---|
Turkey
2010
Turkey
2022
Netherlands
2014
Czech Republic
Germany
2004
| Working length | 1500 mm |
|---|
| Working width | 600 mm |
|---|---|
| Type | forming |
| Material thickness | 0.6 mm |
|---|
Czech Republic
Czech Republic
Turkey
2014
Austria
2001
EN
- Languages
English (GB)