| Manufacturer | Jiangsu Beier Machinery Co., Ltd |
|---|---|
| Model | SS1400 |
| Year | 2017 |
| Location | Poland
|
For sale: complete industrial extrusion line for production of flat polypropylene (PP) sheet/web. The line is configured for a maximum working web width of 1,600 mm and a nominal output of up to 600 kg/h. It comprises two independent extrusion units arranged to allow co-extrusion or combining of two material streams.
Key features and components
- Application: PP flat sheet / web extrusion
- Main material: Polypropylene (PP)
- Maximum nominal output: up to 600 kg/h
- Maximum web width: 1,600 mm
- Product thickness range: approx. 0.30–3.00 mm
- Two independent extrusion units (co-extrusion capability)
- Two independent granulate feeding and material preparation systems (including hopper drying/feeding units)
- Flat/slot die with mechanical screw adjustment for die gap setting
- Multi-roll industrial calender for thickness stabilisation and cooling
- Automatic online thickness measurement system for continuous thickness control
- Double-sided corona treatment unit for surface treatment
- Dual winding system with in-line guillotine cutting system for roll production and web cutting
- CE marking and original manufacturer identification plates present
- Main components supplied by Jiangsu Beier Machinery Co., Ltd. (BEIER)
Condition and operating history
The line was purchased new, installed, commissioned and subjected to technological trials. During commissioning and trials the line processed approximately 40 tonnes of PP material. It was not subsequently used for regular serial or continuous industrial production.
Documentation
Complete technical and operating documentation is available and can be provided to serious prospective buyers for technical due diligence, including CE documentation and operating/maintenance manuals.
Advantages and considerations
The line’s two-extruder, two-feed configuration supports co-extrusion, use of different PP grades, masterbatches, additives or combinations of recycled and virgin material. The combination of automatic thickness control, multi-roll calendering, double-sided corona treatment and dual winding with guillotine cutting covers the main process stages from extrusion to finished rolls.
Inspection and next steps
The complete line is available for technical inspection by prior appointment. Prospective buyers are advised to carry out a standard recommissioning inspection before restarting production; recommended checks include electrical installations, heating/cooling circuits, hydraulic systems, drives and motors, control systems, sensors, seals and wear components. Price and transport/dismantling arrangements: upon request/negotiable.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
We are offering for sale a complete industrial extrusion line for the production of flat polypropylene (PP) sheet/web, with a maximum working width of 1,600 mm and a nominal output of up to 600 kg/h.
The line is equipped with two independent extrusion units and a configuration suitable for co-extrusion / combining two material streams, depending on the required production process.
The equipment was purchased new for a planned industrial production project and was supplied by a specialized Polish company operating in the plastics processing machinery and technology sector.
The complete line was installed, commissioned and subjected to technological trials. It was never used for regular industrial production.
During all commissioning and testing activities, the line processed a total of approximately 40 tonnes of PP material.
Following the testing phase, the planned production launch was suspended due to the COVID-19 pandemic. Subsequently, following the outbreak of the war in Ukraine, the company changed its business profile and ultimately decided not to proceed with the planned production project.
As a result, the line has an exceptionally low operating history compared with a conventional industrial extrusion line of this capacity.
KEY TECHNICAL SPECIFICATIONS
Parameter Specification
Application PP flat sheet / web extrusion
Main material Polypropylene (PP)
Maximum output Up to 600 kg/h
Maximum web width 1,600 mm
Product thickness Approx. 0.30–3.00 mm
Extruders 2 independent extrusion units
Process configuration Co-extrusion / two material streams
Granulate feeding 2 independent feeding systems
Material preparation 2 hopper drying/feeding units
Die Flat / slot die
Die adjustment Mechanical screw adjustment
Calendering Multi-roll industrial calender
Thickness control Automatic online thickness measurement
Surface treatment Double-sided corona treatment
Winding Dual winding system
Cutting Guillotine cutting system for in-line cutting
Operating history Commissioning and testing only
Material processed Approx. 40 tonnes of PP
Documentation Complete technical and operating documentation
Marking CE
Location Poland
LINE CONFIGURATION
1. TWO EXTRUSION UNITS
The line is equipped with two independent extrusion units, allowing two separate material streams to be processed.
This configuration provides the possibility of co-extrusion and material combining, depending on the required production technology and recipe.
The two-stream configuration can provide additional flexibility for the use of:
different PP grades,
additives,
masterbatches and colour concentrates,
recycled and virgin material combinations,
specially formulated material compositions.
The exact production configuration should be selected according to the intended product and process requirements.
2. GRANULATE FEEDING AND MATERIAL PREPARATION
The line includes two independent systems for material feeding and preparation.
The system comprises equipment for:
conveying polypropylene granulate,
material preparation,
drying,
controlled feeding,
independent supply of material to the two extrusion units.
This configuration allows the material streams to be prepared independently before entering the extrusion process.
3. FLAT / SLOT DIE
The extruded material is formed through an industrial flat slot die designed for the production of wide PP sheet/web.
Maximum working width:
1,600 mm
Product thickness range:
Approx. 0.30–3.00 mm
The die is equipped with a mechanical screw adjustment system for setting and fine-tuning the die gap.
4. INDUSTRIAL CALENDERING UNIT
After leaving the die, the molten PP web is transferred to the multi-roll calendering section.
The calendering system is used for:
stabilising product thickness,
cooling the material,
controlling surface characteristics,
maintaining web geometry,
stabilising the production process.
The line includes adjustment systems for controlling the operating parameters of the individual rolls.
5. AUTOMATIC ONLINE THICKNESS MEASUREMENT
The line is equipped with an automatic online thickness measurement system.
The system enables continuous monitoring of the produced web and provides process information that can be used to optimise:
product thickness,
thickness uniformity,
die settings,
process parameters.
This is particularly important for the production of wide PP material where consistent thickness across the entire web width is required.
6. DOUBLE-SIDED CORONA TREATMENT
The line includes a double-sided corona treatment system for surface treatment of the PP web.
Corona treatment increases the surface energy of polypropylene, improving its suitability for subsequent processes such as:
printing,
adhesive bonding,
lamination,
coating,
varnishing,
application of functional layers.
The double-sided configuration significantly expands the potential downstream applications of the produced material.
7. DUAL WINDING SYSTEM
The finished PP web is transferred to a dual winding system for roll production.
The configuration allows efficient winding of the finished material and facilitates roll changes.
The line also includes an in-line guillotine cutting system, allowing the web to be cut during operation and helping to reduce downtime associated with finished roll changes.
CONDITION AND OPERATING HISTORY
The line was purchased new as part of a planned industrial production investment.
After installation, the equipment underwent:
commissioning,
technological start-up,
process testing,
trial production.
The total amount of PP material processed during all testing and commissioning activities was approximately 40 tonnes.
The line was never subsequently used for regular serial or continuous industrial production.
The planned production project was initially suspended due to the COVID-19 pandemic. Following the outbreak of the war in Ukraine, the owner changed its business profile and decided not to proceed with the planned PP production operation.
Important:
The line has therefore accumulated only very limited actual processing time compared with its industrial capacity.
MANUFACTURER
The main components of the line are supplied by:
Jiangsu Beier Machinery Co., Ltd. (BEIER)
The equipment bears the manufacturer's original identification plates and CE marking.
The line was delivered as a complete technological system through a specialized Polish supplier of machinery and production lines for the plastics processing industry.
DOCUMENTATION
Complete technical and operating documentation is available.
The documentation received with the original purchase and installation of the line can be made available to serious prospective buyers during the technical due diligence process.
The buyer may review the available documentation and verify:
machine identification,
technical specifications,
configuration,
equipment completeness,
CE documentation,
operating and maintenance documentation.
KEY ADVANTAGES
VERY LOW OPERATING HISTORY
Only approximately 40 tonnes of PP material were processed during commissioning and technological trials.
NEVER USED FOR REGULAR PRODUCTION
The line did not operate in normal serial production or multi-shift industrial operation.
HIGH OUTPUT
Maximum nominal output of up to 600 kg/h.
1,600 MM WORKING WIDTH
Suitable for production of wide PP sheet/web.
WIDE THICKNESS RANGE
Approx. 0.30–3.00 mm, depending on material, configuration and process conditions.
TWO EXTRUSION UNITS
Two independent extrusion systems providing flexibility for two material streams and co-extrusion applications.
AUTOMATIC THICKNESS MEASUREMENT
Online monitoring of web thickness during production.
DOUBLE-SIDED CORONA TREATMENT
Improves the surface properties of PP for downstream printing, bonding, lamination and coating applications.
DUAL WINDING SYSTEM
Designed for efficient roll production and reduced downtime during roll changes.
IN-LINE CUTTING
Guillotine system allowing the web to be cut during operation.
COMPLETE LINE
The offer includes a complete technological line rather than individual standalone components.
FULL DOCUMENTATION
Technical and operating documentation available.
POTENTIAL APPLICATIONS
Depending on the PP grade, formulation, product specifications and process configuration, the line can potentially be used for the production of PP sheet/web for applications including:
packaging industry,
technical packaging,
thermoforming,
separators and intermediate layers,
technical components,
lamination,
printing substrates,
advertising and display materials,
industrial semi-finished PP products,
protective and functional sheets,
other applications requiring wide polypropylene sheet/web.
The final application and achievable production parameters should be verified against the intended PP formulation and product specifications.
INSPECTION AND DUE DILIGENCE
The complete line is available for technical inspection in Poland by prior appointment.
Prospective buyers are welcome to carry out a detailed inspection of the equipment.
The inspection may include:
visual inspection of the complete line,
verification of machine identification plates,
inspection of individual line components,
review of available technical documentation,
verification of line completeness,
technical inspection by the buyer's engineers or representatives.
Due to the extended period during which the line has not been in regular operation, a standard recommissioning inspection is recommended before restarting production.
This should include inspection and testing of, among other systems:
electrical installations,
heating systems,
cooling circuits,
hydraulic systems,
drives and motors,
control systems,
sensors,
seals and other wear components.
LOCATION AND SALE CONDITIONS
Documentation: Complete documentation available
Price: Negotiable / upon request
Transport: Dismantling, loading and transport arrangements can be discussed with the buyer.
The line can be made available for inspection by serious prospective buyers and their technical representatives.
SUMMARY
For sale is a complete BEIER PP sheet extrusion line with a maximum working width of 1,600 mm and nominal output of up to 600 kg/h.
The line features:
2 extrusion units,
co-extrusion capability,
two independent material feeding/preparation systems,
flat slot die,
industrial multi-roll calender,
automatic online thickness measurement,
double-sided corona treatment,
dual winding system,
in-line guillotine cutting,
CE marking,
complete technical documentation.
The main distinguishing feature of this offer is the exceptionally low operating history. The line processed only approximately 40 tonnes of PP during commissioning and technological trials and was never used for regular industrial production.
This makes the equipment an attractive alternative for a company looking to acquire a complete PP sheet/web extrusion line with substantial industrial capacity while avoiding the cost and lead time associated with purchasing and commissioning a new system.
.
Price: Upon request / negotiable.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Factory – large company |
| Active since | 2026 |
| Offers online | 1 |
| Last activity | Aug. 28, 2026 |
We are offering for sale a complete industrial extrusion line for the production of flat polypropylene (PP) sheet/web, with a maximum working width of 1,600 mm and a nominal output of up to 600 kg/h.
The line is equipped with two independent extrusion units and a configuration suitable for co-extrusion / combining two material streams, depending on the required production process.
The equipment was purchased new for a planned industrial production project and was supplied by a specialized Polish company operating in the plastics processing machinery and technology sector.
The complete line was installed, commissioned and subjected to technological trials. It was never used for regular industrial production.
During all commissioning and testing activities, the line processed a total of approximately 40 tonnes of PP material.
Following the testing phase, the planned production launch was suspended due to the COVID-19 pandemic. Subsequently, following the outbreak of the war in Ukraine, the company changed its business profile and ultimately decided not to proceed with the planned production project.
As a result, the line has an exceptionally low operating history compared with a conventional industrial extrusion line of this capacity.
KEY TECHNICAL SPECIFICATIONS
Parameter Specification
Application PP flat sheet / web extrusion
Main material Polypropylene (PP)
Maximum output Up to 600 kg/h
Maximum web width 1,600 mm
Product thickness Approx. 0.30–3.00 mm
Extruders 2 independent extrusion units
Process configuration Co-extrusion / two material streams
Granulate feeding 2 independent feeding systems
Material preparation 2 hopper drying/feeding units
Die Flat / slot die
Die adjustment Mechanical screw adjustment
Calendering Multi-roll industrial calender
Thickness control Automatic online thickness measurement
Surface treatment Double-sided corona treatment
Winding Dual winding system
Cutting Guillotine cutting system for in-line cutting
Operating history Commissioning and testing only
Material processed Approx. 40 tonnes of PP
Documentation Complete technical and operating documentation
Marking CE
Location Poland
LINE CONFIGURATION
1. TWO EXTRUSION UNITS
The line is equipped with two independent extrusion units, allowing two separate material streams to be processed.
This configuration provides the possibility of co-extrusion and material combining, depending on the required production technology and recipe.
The two-stream configuration can provide additional flexibility for the use of:
different PP grades,
additives,
masterbatches and colour concentrates,
recycled and virgin material combinations,
specially formulated material compositions.
The exact production configuration should be selected according to the intended product and process requirements.
2. GRANULATE FEEDING AND MATERIAL PREPARATION
The line includes two independent systems for material feeding and preparation.
The system comprises equipment for:
conveying polypropylene granulate,
material preparation,
drying,
controlled feeding,
independent supply of material to the two extrusion units.
This configuration allows the material streams to be prepared independently before entering the extrusion process.
3. FLAT / SLOT DIE
The extruded material is formed through an industrial flat slot die designed for the production of wide PP sheet/web.
Maximum working width:
1,600 mm
Product thickness range:
Approx. 0.30–3.00 mm
The die is equipped with a mechanical screw adjustment system for setting and fine-tuning the die gap.
4. INDUSTRIAL CALENDERING UNIT
After leaving the die, the molten PP web is transferred to the multi-roll calendering section.
The calendering system is used for:
stabilising product thickness,
cooling the material,
controlling surface characteristics,
maintaining web geometry,
stabilising the production process.
The line includes adjustment systems for controlling the operating parameters of the individual rolls.
5. AUTOMATIC ONLINE THICKNESS MEASUREMENT
The line is equipped with an automatic online thickness measurement system.
The system enables continuous monitoring of the produced web and provides process information that can be used to optimise:
product thickness,
thickness uniformity,
die settings,
process parameters.
This is particularly important for the production of wide PP material where consistent thickness across the entire web width is required.
6. DOUBLE-SIDED CORONA TREATMENT
The line includes a double-sided corona treatment system for surface treatment of the PP web.
Corona treatment increases the surface energy of polypropylene, improving its suitability for subsequent processes such as:
printing,
adhesive bonding,
lamination,
coating,
varnishing,
application of functional layers.
The double-sided configuration significantly expands the potential downstream applications of the produced material.
7. DUAL WINDING SYSTEM
The finished PP web is transferred to a dual winding system for roll production.
The configuration allows efficient winding of the finished material and facilitates roll changes.
The line also includes an in-line guillotine cutting system, allowing the web to be cut during operation and helping to reduce downtime associated with finished roll changes.
CONDITION AND OPERATING HISTORY
The line was purchased new as part of a planned industrial production investment.
After installation, the equipment underwent:
commissioning,
technological start-up,
process testing,
trial production.
The total amount of PP material processed during all testing and commissioning activities was approximately 40 tonnes.
The line was never subsequently used for regular serial or continuous industrial production.
The planned production project was initially suspended due to the COVID-19 pandemic. Following the outbreak of the war in Ukraine, the owner changed its business profile and decided not to proceed with the planned PP production operation.
Important:
The line has therefore accumulated only very limited actual processing time compared with its industrial capacity.
MANUFACTURER
The main components of the line are supplied by:
Jiangsu Beier Machinery Co., Ltd. (BEIER)
The equipment bears the manufacturer's original identification plates and CE marking.
The line was delivered as a complete technological system through a specialized Polish supplier of machinery and production lines for the plastics processing industry.
DOCUMENTATION
Complete technical and operating documentation is available.
The documentation received with the original purchase and installation of the line can be made available to serious prospective buyers during the technical due diligence process.
The buyer may review the available documentation and verify:
machine identification,
technical specifications,
configuration,
equipment completeness,
CE documentation,
operating and maintenance documentation.
KEY ADVANTAGES
VERY LOW OPERATING HISTORY
Only approximately 40 tonnes of PP material were processed during commissioning and technological trials.
NEVER USED FOR REGULAR PRODUCTION
The line did not operate in normal serial production or multi-shift industrial operation.
HIGH OUTPUT
Maximum nominal output of up to 600 kg/h.
1,600 MM WORKING WIDTH
Suitable for production of wide PP sheet/web.
WIDE THICKNESS RANGE
Approx. 0.30–3.00 mm, depending on material, configuration and process conditions.
TWO EXTRUSION UNITS
Two independent extrusion systems providing flexibility for two material streams and co-extrusion applications.
AUTOMATIC THICKNESS MEASUREMENT
Online monitoring of web thickness during production.
DOUBLE-SIDED CORONA TREATMENT
Improves the surface properties of PP for downstream printing, bonding, lamination and coating applications.
DUAL WINDING SYSTEM
Designed for efficient roll production and reduced downtime during roll changes.
IN-LINE CUTTING
Guillotine system allowing the web to be cut during operation.
COMPLETE LINE
The offer includes a complete technological line rather than individual standalone components.
FULL DOCUMENTATION
Technical and operating documentation available.
POTENTIAL APPLICATIONS
Depending on the PP grade, formulation, product specifications and process configuration, the line can potentially be used for the production of PP sheet/web for applications including:
packaging industry,
technical packaging,
thermoforming,
separators and intermediate layers,
technical components,
lamination,
printing substrates,
advertising and display materials,
industrial semi-finished PP products,
protective and functional sheets,
other applications requiring wide polypropylene sheet/web.
The final application and achievable production parameters should be verified against the intended PP formulation and product specifications.
INSPECTION AND DUE DILIGENCE
The complete line is available for technical inspection in Poland by prior appointment.
Prospective buyers are welcome to carry out a detailed inspection of the equipment.
The inspection may include:
visual inspection of the complete line,
verification of machine identification plates,
inspection of individual line components,
review of available technical documentation,
verification of line completeness,
technical inspection by the buyer's engineers or representatives.
Due to the extended period during which the line has not been in regular operation, a standard recommissioning inspection is recommended before restarting production.
This should include inspection and testing of, among other systems:
electrical installations,
heating systems,
cooling circuits,
hydraulic systems,
drives and motors,
control systems,
sensors,
seals and other wear components.
LOCATION AND SALE CONDITIONS
Documentation: Complete documentation available
Price: Negotiable / upon request
Transport: Dismantling, loading and transport arrangements can be discussed with the buyer.
The line can be made available for inspection by serious prospective buyers and their technical representatives.
SUMMARY
For sale is a complete BEIER PP sheet extrusion line with a maximum working width of 1,600 mm and nominal output of up to 600 kg/h.
The line features:
2 extrusion units,
co-extrusion capability,
two independent material feeding/preparation systems,
flat slot die,
industrial multi-roll calender,
automatic online thickness measurement,
double-sided corona treatment,
dual winding system,
in-line guillotine cutting,
CE marking,
complete technical documentation.
The main distinguishing feature of this offer is the exceptionally low operating history. The line processed only approximately 40 tonnes of PP during commissioning and technological trials and was never used for regular industrial production.
This makes the equipment an attractive alternative for a company looking to acquire a complete PP sheet/web extrusion line with substantial industrial capacity while avoiding the cost and lead time associated with purchasing and commissioning a new system.
.
Price: Upon request / negotiable.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
For sale: complete industrial extrusion line for production of flat polypropylene (PP) sheet/web. The line is configured for a maximum working web width of 1,600 mm and a nominal output of up to 600 kg/h. It comprises two independent extrusion units arranged to allow co-extrusion or combining of two material streams.
Key features and components
- Application: PP flat sheet / web extrusion
- Main material: Polypropylene (PP)
- Maximum nominal output: up to 600 kg/h
- Maximum web width: 1,600 mm
- Product thickness range: approx. 0.30–3.00 mm
- Two independent extrusion units (co-extrusion capability)
- Two independent granulate feeding and material preparation systems (including hopper drying/feeding units)
- Flat/slot die with mechanical screw adjustment for die gap setting
- Multi-roll industrial calender for thickness stabilisation and cooling
- Automatic online thickness measurement system for continuous thickness control
- Double-sided corona treatment unit for surface treatment
- Dual winding system with in-line guillotine cutting system for roll production and web cutting
- CE marking and original manufacturer identification plates present
- Main components supplied by Jiangsu Beier Machinery Co., Ltd. (BEIER)
Condition and operating history
The line was purchased new, installed, commissioned and subjected to technological trials. During commissioning and trials the line processed approximately 40 tonnes of PP material. It was not subsequently used for regular serial or continuous industrial production.
Documentation
Complete technical and operating documentation is available and can be provided to serious prospective buyers for technical due diligence, including CE documentation and operating/maintenance manuals.
Advantages and considerations
The line’s two-extruder, two-feed configuration supports co-extrusion, use of different PP grades, masterbatches, additives or combinations of recycled and virgin material. The combination of automatic thickness control, multi-roll calendering, double-sided corona treatment and dual winding with guillotine cutting covers the main process stages from extrusion to finished rolls.
Inspection and next steps
The complete line is available for technical inspection by prior appointment. Prospective buyers are advised to carry out a standard recommissioning inspection before restarting production; recommended checks include electrical installations, heating/cooling circuits, hydraulic systems, drives and motors, control systems, sensors, seals and wear components. Price and transport/dismantling arrangements: upon request/negotiable.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – large company |
| Active since | 2026 |
| Offers online | 1 |
| Last activity | Aug. 28, 2026 |
ЛИНИЯ ЗА ЕКСТРУЗИЯ НА ЛИСТИ ОТ ПОЛИПРОПИЛЕН BEIER 1600 мм До 600 кг/ч | Работна ширина 1600 мм | Конфигурация с два екструдера | Коекструзия | Двустранна корона обработка
EXTRUDÁCNÍ LINKA BEIER NA VÝROBU PP DESEK, 1600 mm Až 600 kg/h | Pracovní šířka 1600 mm | Konfigurace se dvěma extrudéry | Koextrúze | Oboustranná koronová úprava
BEIER 1600 mm PP-PLADE-EKSTRUDERINGSANLÆG Op til 600 kg/t | 1600 mm arbejdsbredde | Konfiguration med to ekstrudere | Co-ekstrudering | Dobbeltsidet koronabehandling
BEIER 1600 mm PP-Platten-Extrusionsanlage Bis zu 600 kg/h | 1600 mm Arbeitsbreite | Doppel-Extruder-Konfiguration | Co-Extrusion | Beidseitige Corona-Behandlung
ΓΡΑΜΜΗ ΕΞΩΘΗΣΗΣ ΦΥΛΛΩΝ PP BEIER 1600 mm Έως 600 kg/h | Πλάτος εργασίας 1600 mm | Διαμόρφωση με διπλό εξωθητή | Συν-εξώθηση | Επεξεργασία κορώνας και στις δύο πλευρές
BEIER 1600 mm PP SHEET EXTRUSION LINE Up to 600 kg/h | 1600 mm Working Width | Twin-Extruder Configuration | Co-Extrusion | Double-Sided Corona Treatment
LÍNEA DE EXTRUSIÓN DE LÁMINAS DE PP BEIER DE 1600 mm: Hasta 600 kg/h | Ancho de trabajo de 1600 mm | Configuración de extrusora doble | Coextrusión | Tratamiento corona por ambas caras
LIGNE D'EXTRUSION DE FEUILLES EN PP BEIER 1 600 mm : jusqu'à 600 kg/h | Largeur de travail : 1 600 mm | Configuration à double extrudeuse | Co-extrusion | Traitement corona double face
BEIER linija za ekstrudiranje PP ploča 1600 mm do 600 kg/h | 1600 mm radna širina | konfiguracija s dvostrukim ekstruderom | ko-ekstrudiranje | dvostrana koronna obrada
BEIER 1600 mm-es PP-lemez-extrudáló sor Akár 600 kg/h | 1600 mm munkaszélesség | Két extruderből álló konfiguráció | Koextrudálás | Kétoldalas koronakezelés
LINEA DI ESTRUSIONE DI FOGLI IN PP BEIER DA 1600 mm Fino a 600 kg/h | Larghezza di lavoro 1600 mm | Configurazione a doppio estrusore | Coestrusione | Trattamento corona su entrambi i lati
BEIER 1600 mm PP lakštų ekstruzijos linija Iki 600 kg/h | 1600 mm darbinis plotis | Dviejų ekstruderių konfigūracija | Koekstrūzija | Dvipusis „Corona“ apdorojimas
BEIER 1600 mm PP-plaat-extrusielijn Tot 600 kg/u | Werkbreedte 1600 mm | Configuratie met dubbele extruder | Co-extrusie | Dubbelzijdige coronabehandeling
LINIA DO WYTŁACZANIA ARKUSZY PP BEIER 1600 mm Wydajność do 600 kg/h | Szerokość robocza 1600 mm | Konfiguracja z dwoma wytłaczarkami | Wytłaczanie współwłókniste | Dwustronna obróbka koronowa
LINHA DE EXTRUSÃO DE CHAPAS DE PP BEIER DE 1600 mm Até 600 kg/h | Largura de trabalho de 1600 mm | Configuração com extrusora dupla | Coextrusão | Tratamento corona em ambos os lados
LINIE DE EXTRUDARE A FOILELOR DIN PP BEIER DE 1600 mm Până la 600 kg/h | Lățime de lucru de 1600 mm | Configurație cu două extrudere | Coextrudare | Tratament corona pe ambele fețe
ЛИНИЯ ЭКСТРУЗИИ ЛИСТОВ ИЗ ПОЛИПРОПИЛЕНА BEIER 1600 мм Производительность до 600 кг/ч | Рабочая ширина 1600 мм | Конфигурация с двумя экструдерами | Соэкструзия | Двусторонняя корона-обработка
BEIER linija za ekstruziju PP ploča 1600 mm Do 600 kg/h | Radna širina 1600 mm | Konfiguracija sa dva ekstrudera | Koekstruzija | Dvostrana korona obrada
BEIER 1600 mm EXTRUDERINGSLINJE FÖR PP-ARK Upp till 600 kg/h | 1600 mm arbetsbredd | Konfiguration med dubbla extrudrar | Koextrudering | Dubbelsidig koronabehandling
BEIER 1600 mm PP Levha Ekstrüzyon Hattı Saatte 600 kg'a kadar | 1600 mm Çalışma Genişliği | Çift Ekstrüder Yapısı | Ko-Ekstrüzyon | Çift Taraflı Korona İşlemi
EN
- Languages
English (GB)