Contact us to receive an offer.
| Manufacturer | ITALPRESSE |
|---|---|
| Model | 3 000 × 1 230 mm |
| Year | |
| Location | Czech Republic
|
For sale: Italpresse panel press with a pressing surface of 3,000 × 1,230 mm (Plates length: 3000 mm; Plates width: 1230 mm). The seller specifies nine pressing pistons. Manufacturer: ITALPRESSE (machine bears an Ital Press / Fabbrica Presse per Legno nameplate).
Intended application and basic construction
- Designed for flat-surface pressing tasks commonly required in wood panel production: bonding veneer to substrate panels (DTD/MDF/plywood), manufacturing sandwich panels, and bonding finger-jointed or panel components.
- Welded steel frame with a solid pressing plate. Pistons are mounted on vertical spindles with adjustable height; the upper crossbar is height-adjustable to accommodate different part thicknesses.
Controls, utilities and fittings
- Wires and hoses run along the frame to the actuators/cylinders; there are visible hoses/electrical cables associated with the overhead crossbeam and pistons.
- There appear to be pneumatic cylinders and a compressed air treatment unit in the vicinity of the pistons; the seller describes the presses as hydraulic. Verify the drive/actuation type and utility requirements on site.
Accessories / condition notes
- Clamps/fixtures are present along the work surface and a front operator access area is apparent.
- The machine is painted dark green and is currently supported on wooden pallets for handling/transport.
Important: a full type plate listing serial number, year of manufacture and pressing force was not made available. Prospective buyers should verify pressing force, type of drive (hydraulic vs pneumatic), detailed condition, control systems and all specifications during an on-site inspection.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
We are offering for sale a panel press manufactured by the Italian company Italpresse S.p.A. (Bagnatica, Bergamo) with a pressing area of 3,000 × 1,230 mm and nine pressing pistons.
Presses of this type are used for flat-surface pressing of large components—most commonly for bonding veneer to substrate panels (DTD, MDF, plywood), for pressing sandwich panels, and for bonding finger-jointed and panel components. The structure consists of a welded steel frame with a solid pressing plate; the pistons are mounted on vertical spindles, allowing their height to be adjusted according to the thickness of the part being pressed. The upper crossbar is height-adjustable.
The dimensions of the pressing surface and the number of pistons are provided by the seller. The machine bears an Italpresse manufacturer’s label; a type plate with the serial number, year of manufacture, and pressing force was not available—prospective buyers should verify the specifications and condition during an inspection. The photographs show pneumatic cylinders and a compressed air treatment unit near the pistons; the seller describes the presses as hydraulic. We recommend verifying the drive type on site.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Consultant / Intermediary |
| Active since | 2025 |
| Offers online | 13 |
| Last activity | Oct. 23, 2026 |
We are offering for sale a panel press manufactured by the Italian company Italpresse S.p.A. (Bagnatica, Bergamo) with a pressing area of 3,000 × 1,230 mm and nine pressing pistons.
Presses of this type are used for flat-surface pressing of large components—most commonly for bonding veneer to substrate panels (DTD, MDF, plywood), for pressing sandwich panels, and for bonding finger-jointed and panel components. The structure consists of a welded steel frame with a solid pressing plate; the pistons are mounted on vertical spindles, allowing their height to be adjusted according to the thickness of the part being pressed. The upper crossbar is height-adjustable.
The dimensions of the pressing surface and the number of pistons are provided by the seller. The machine bears an Italpresse manufacturer’s label; a type plate with the serial number, year of manufacture, and pressing force was not available—prospective buyers should verify the specifications and condition during an inspection. The photographs show pneumatic cylinders and a compressed air treatment unit near the pistons; the seller describes the presses as hydraulic. We recommend verifying the drive type on site.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
For sale: Italpresse panel press with a pressing surface of 3,000 × 1,230 mm (Plates length: 3000 mm; Plates width: 1230 mm). The seller specifies nine pressing pistons. Manufacturer: ITALPRESSE (machine bears an Ital Press / Fabbrica Presse per Legno nameplate).
Intended application and basic construction
- Designed for flat-surface pressing tasks commonly required in wood panel production: bonding veneer to substrate panels (DTD/MDF/plywood), manufacturing sandwich panels, and bonding finger-jointed or panel components.
- Welded steel frame with a solid pressing plate. Pistons are mounted on vertical spindles with adjustable height; the upper crossbar is height-adjustable to accommodate different part thicknesses.
Controls, utilities and fittings
- Wires and hoses run along the frame to the actuators/cylinders; there are visible hoses/electrical cables associated with the overhead crossbeam and pistons.
- There appear to be pneumatic cylinders and a compressed air treatment unit in the vicinity of the pistons; the seller describes the presses as hydraulic. Verify the drive/actuation type and utility requirements on site.
Accessories / condition notes
- Clamps/fixtures are present along the work surface and a front operator access area is apparent.
- The machine is painted dark green and is currently supported on wooden pallets for handling/transport.
Important: a full type plate listing serial number, year of manufacture and pressing force was not made available. Prospective buyers should verify pressing force, type of drive (hydraulic vs pneumatic), detailed condition, control systems and all specifications during an on-site inspection.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Consultant / Intermediary |
| Active since | 2025 |
| Offers online | 13 |
| Last activity | Oct. 23, 2026 |
Преса за дърво ITALPRESSE 3 000 × 1 230 mm
Dýhovací a plošný lis ITALPRESSE, lisovací plocha 3 000 × 1 230 mm
ITALPRESSE 3 000 × 1 230 mm Træpresse
ITALPRESSE 3 000 × 1 230 mm Holzpresse
Πρέσα ξύλου ITALPRESSE 3 000 × 1 230 mm
ITALPRESSE 3 000 × 1 230 mm Wood press
Prensa para madera ITALPRESSE 3 000 × 1 230 mm
Presse à bois ITALPRESSE 3 000 × 1 230 mm
Preša za drvo ITALPRESSE 3 000 × 1 230 mm
ITALPRESSE 3 000 × 1 230 mm Faipari prés
Pressa per legno ITALPRESSE 3 000 × 1 230 mm
ITALPRESSE 3 000 × 1 230 mm Medienos presas
ITALPRESSE 3 000 × 1 230 mm Houtpers
Prasa do drewna ITALPRESSE 3 000 × 1 230 mm
Prensa para madeira ITALPRESSE 3 000 × 1 230 mm
Presă pentru lemn ITALPRESSE 3 000 × 1 230 mm
ITALPRESSE 3 000 × 1 230 mm Пресс для древесины
Presa za drvo ITALPRESSE 3 000 × 1 230 mm
ITALPRESSE 3 000 × 1 230 mm Träpress
Ahşap presi ITALPRESSE 3 000 × 1 230 mm
EN
- Languages
English (GB)