INFOTEC 2015F Router

Low working hours

14,000 €

Make an offer
  • - Secured payment for the purchase
  • - Dedicated compliance check of the seller
  • - Logistics and customs support if applicable
  • - After-sale follow up if needed

Contact us to receive an offer.

Manufacturer INFOTEC
Model 2015F
Year 2015
Location Poland PL
Ilya
Your dedicated contact
Ilya Z.

Automatic description (AI-Generated)

InfoTEC CNC plotter, model 2015, manufactured in 2015. The machine is described as capable of milling, cutting with an oscillating knife, and creasing. The sale includes the machine and the equipment listed below.

Included equipment:
- Italian Hiteco spindle rated at 4.5 kW, with a maximum speed of 24,000 rpm and an ER32 tool holder
- Oscillating knife
- Creasing tool
- Optical camera
- Four-zone vacuum table with pump
- Additional pull-out worktop
- Control cabinet
- Computer with software
- Chip extraction system

The stated power supply is three-phase 400 V, 50/60 Hz. The machine weight shown on its nameplate is 750 kg.

The seller describes the milling machine as being in working order, with visible signs of use. There is currently no electricity at the premises, so the machine cannot be started and a test run cannot be performed on site. A visual inspection of the machine and included equipment is possible.

Pickup is in person. The machine is on the ground floor, so it does not need to be carried down stairs. Loading, transportation, and the pickup time must be arranged before arrival.

The stated gross price, including 23% VAT, is 67,650 PLN. The price is negotiable if pickup proceeds smoothly. For comparison, a new PGCNC 2030 Special plotter with an oscillating cutter and creaser is offered for 166,000 PLN net. That model is larger and has similar functions, but is not an identical replacement for this machine.

The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.

Seller's description

InfoTEC CNC plotter, model 2015, manufactured in 2015. The machine is capable of milling, cutting with an oscillating knife, and creasing. The offer includes the machine and all the equipment listed below.

Liquidation sale due to the need to vacate the premises.

EQUIPMENT INCLUDED IN THE PRICE:
– Italian Hiteco 4.5 kW spindle, maximum speed 24,000 rpm, ER32 tool holder,
– oscillating knife,
– creasing tool,
– optical camera,
– four-zone vacuum table with pump,
– additional pull-out worktop shown in the photos,
– control cabinet,
– computer with software,
– chip extraction system.

– Year of manufacture: 2015,
– Power supply: three-phase 400 V, 50/60 Hz,
– Machine weight according to the nameplate: 750 kg.

The milling machine is in working order, with visible signs of use. Currently, there is no electricity on the premises, so it is not possible to start the machine or perform a test run on site. A visual inspection of the machine and equipment is possible.

Pickup in person in Łódź. The machine is located on the ground floor, so there is no need to carry it down stairs. Loading, transportation, and pickup time must be arranged prior to arrival.

A new PGCNC 2030 Special plotter with an oscillating cutter and creaser is offered for 166,000 PLN net. This is a larger model with similar functions, not an identical replacement for the machine being sold.

Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.


Client type Factory – small or medium company
Active since 2026
Offers online 2
Last activity Nov. 12, 2026

Seller's description

InfoTEC CNC plotter, model 2015, manufactured in 2015. The machine is capable of milling, cutting with an oscillating knife, and creasing. The offer includes the machine and all the equipment listed below.

Liquidation sale due to the need to vacate the premises.

EQUIPMENT INCLUDED IN THE PRICE:
– Italian Hiteco 4.5 kW spindle, maximum speed 24,000 rpm, ER32 tool holder,
– oscillating knife,
– creasing tool,
– optical camera,
– four-zone vacuum table with pump,
– additional pull-out worktop shown in the photos,
– control cabinet,
– computer with software,
– chip extraction system.

– Year of manufacture: 2015,
– Power supply: three-phase 400 V, 50/60 Hz,
– Machine weight according to the nameplate: 750 kg.

The milling machine is in working order, with visible signs of use. Currently, there is no electricity on the premises, so it is not possible to start the machine or perform a test run on site. A visual inspection of the machine and equipment is possible.

Pickup in person in Łódź. The machine is located on the ground floor, so there is no need to carry it down stairs. Loading, transportation, and pickup time must be arranged prior to arrival.

A new PGCNC 2030 Special plotter with an oscillating cutter and creaser is offered for 166,000 PLN net. This is a larger model with similar functions, not an identical replacement for the machine being sold.

Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.



Automatic description (AI-Generated)

InfoTEC CNC plotter, model 2015, manufactured in 2015. The machine is described as capable of milling, cutting with an oscillating knife, and creasing. The sale includes the machine and the equipment listed below.

Included equipment:
- Italian Hiteco spindle rated at 4.5 kW, with a maximum speed of 24,000 rpm and an ER32 tool holder
- Oscillating knife
- Creasing tool
- Optical camera
- Four-zone vacuum table with pump
- Additional pull-out worktop
- Control cabinet
- Computer with software
- Chip extraction system

The stated power supply is three-phase 400 V, 50/60 Hz. The machine weight shown on its nameplate is 750 kg.

The seller describes the milling machine as being in working order, with visible signs of use. There is currently no electricity at the premises, so the machine cannot be started and a test run cannot be performed on site. A visual inspection of the machine and included equipment is possible.

Pickup is in person. The machine is on the ground floor, so it does not need to be carried down stairs. Loading, transportation, and the pickup time must be arranged before arrival.

The stated gross price, including 23% VAT, is 67,650 PLN. The price is negotiable if pickup proceeds smoothly. For comparison, a new PGCNC 2030 Special plotter with an oscillating cutter and creaser is offered for 166,000 PLN net. That model is larger and has similar functions, but is not an identical replacement for this machine.

The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.


About this seller

Client type Factory – small or medium company
Active since 2026
Offers online 2
Last activity Nov. 12, 2026

Here is a selection of similar machines - INFOTEC 2015F

INFOTEC 2015F Router