9,000 €
Make an offerContact us to receive an offer.
| Strength | 35 T |
| Folding length | 2500 mm |
| Axis number | 4 |
| Hole | No |
| ------------------- | |
| worked hours | |
| hours under power | |
| state | excellent |
| At local norms | --------- |
| status | under power |
| Datasheet | Imal PP0 35/25 |
| Last availability date | 30/04/2026 |
This IMAL press brake model PP0 35/25, manufactured in 2005, offers a bending capacity of 35 tons and a useful bending length of 2500 mm. It features a 4-axis register system, allowing for precise and versatile bending operations. The machine is equipped with safety photocells and a visible warning sign indicating a potential crushing hazard, underscoring its attention to operator safety.
The press brake has blue protective covers on both sides, which help safeguard key mechanical components. A foot pedal control with two pedals—one yellow and one blue—is connected by cable, providing convenient operation control. On the side, a blue motor is mounted on the top left, contributing to the machine's functionality.
The control panel is mounted on a yellow arm and includes buttons along with a digital display, facilitating user-friendly operation and monitoring. Some handwritten markings and measurements are visible on the protective cover and control panel, likely aiding in setup or operation.
The machine shows signs of use with some wear, dirt marks, and minor rust spots, especially near the bottom area, which is typical for industrial equipment of this age. Overall, the IMAL PP0 35/25 press brake is a robust piece of equipment suitable for various bending tasks, combining substantial capacity with practical safety and control features.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Press bending machine IMAL useful bending length: 2500 mm., power: 35 ton. , 4-axis register, safety photocells, year of production 2005, assembled and fully functional
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Factory – large company |
| Active since | 2025 |
| Offers online | 8 |
| Last activity | May 7, 2026 |
Press bending machine IMAL useful bending length: 2500 mm., power: 35 ton. , 4-axis register, safety photocells, year of production 2005, assembled and fully functional
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Strength | 35 T |
| Folding length | 2500 mm |
| Axis number | 4 |
| Hole | No |
| ------------------- | |
| worked hours | |
| hours under power | |
| state | excellent |
| At local norms | --------- |
| status | under power |
| Datasheet | Imal PP0 35/25 |
| Last availability date | 30/04/2026 |
This IMAL press brake model PP0 35/25, manufactured in 2005, offers a bending capacity of 35 tons and a useful bending length of 2500 mm. It features a 4-axis register system, allowing for precise and versatile bending operations. The machine is equipped with safety photocells and a visible warning sign indicating a potential crushing hazard, underscoring its attention to operator safety.
The press brake has blue protective covers on both sides, which help safeguard key mechanical components. A foot pedal control with two pedals—one yellow and one blue—is connected by cable, providing convenient operation control. On the side, a blue motor is mounted on the top left, contributing to the machine's functionality.
The control panel is mounted on a yellow arm and includes buttons along with a digital display, facilitating user-friendly operation and monitoring. Some handwritten markings and measurements are visible on the protective cover and control panel, likely aiding in setup or operation.
The machine shows signs of use with some wear, dirt marks, and minor rust spots, especially near the bottom area, which is typical for industrial equipment of this age. Overall, the IMAL PP0 35/25 press brake is a robust piece of equipment suitable for various bending tasks, combining substantial capacity with practical safety and control features.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – large company |
| Active since | 2025 |
| Offers online | 8 |
| Last activity | May 7, 2026 |
Натиснете спирачка IMAL PP0 35/25
Ohraňovací lis IMAL PP0 35/25
IMAL PP0 35/25 Tryk på bremsen
IMAL PP0 35/25 Abkantpresse
πάτα φρένο IMAL PP0 35/25
IMAL PP0 35/25 Press brake
Prensa plegadora IMAL PP0 35/25
Presse plieuse IMAL PP0 35/25
Pritisnite kočnicu IMAL PP0 35/25
IMAL PP0 35/25 nyomd a féket
Presso Piegatrice IMAL PP0 35/25
Paspauskite stabdį IMAL PP0 35/25
IMAL PP0 35/25 druk op de rem
Prasa krawędziowa IMAL PP0 35/25
Pressione o freio IMAL PP0 35/25
apasa frana IMAL PP0 35/25
IMAL PP0 35/25 Листогибочный пресс
pritisni kočnicu IMAL PP0 35/25
IMAL PP0 35/25 Tryck på bromsen
Abkant Pres IMAL PP0 35/25
EN
- Languages
English (GB)