| Manufacturer | IMA |
|---|---|
| Model | BIMA 610 V |
| Year | 1996 |
| Location | Germany
|
Machine: IMA BIMA 610 V CNC wood machining centre (manufacturer: IMA, year manufactured: 1996). This listing describes a 3-axis CNC centre with a long X travel intended for panel and long-workpiece processing.
Key specifications
- Axes: 3
- X travel / table length: 4000 mm
- Y travel / table width: 1200 mm
- Z travel: not specified
- Machine height: 3100 mm
- Machine weight: 7500 kg
- CNC control: NUM
- Drive system: Siemens SIMODRIVE 611
Workpiece capacity
- Maximum workpiece length: 4000 mm
- Minimum workpiece length: 150 mm
- Maximum workpiece width: 1650 mm
- Minimum workpiece thickness: 10 mm
- Maximum workpiece thickness: 65 mm
Spindles, tooling and feeds
- Main spindle power: 7.5 kW (water-cooled main spindle motor)
- Main spindle speed: up to 18,000 RPM
- Tool holder: HSK F63 (DIN 69893)
- Maximum tool weight: 5 kg
- Maximum tool clamping force: 10,000 N
- Feed drive motor power: 4 kW
- Feed speed range: 1,500–18,000 mm/min
- Tool stations / tool positions listed: 5
Drilling and extraction
- Drilling spindles X-direction: 5
- Drilling spindles Y-direction: 11
- Maximum drilling diameter: 45 mm
- Dust extraction: one port; recommended connection diameters and corresponding airflows provided (Ø100–300 mm listed; detailed flow rates included in specification)
Utilities and electrical
- Operating / supply voltage: 3/N/PE, 400 V ±5%, 50 Hz
- Total connected load: 33 kVA; rated power: 41 kW; rated current: 62 A
- Control voltage: 24 V
- Compressed air: 6–10 bar; required air consumption: 28 m³/h; air connection: 1/2"
Condition and equipment notes
- The machine is listed as disassembled. No independent test or functional status beyond that listing is provided here. Avoid assuming operational status without inspection or seller confirmation.
- Optional equipment (not included): vacuum block suction cups (aluminium) and sliding console; two milling spindles for synchronous milling with integrated tool changers; safety fence with associated safety mats; control cabinet and operating unit; waste conveyor belt for milled sections.
Remarks
This specification consolidates the technical details provided for the IMA BIMA 610 V. Interested parties should verify the machine condition, component completeness and availability of any optional equipment directly with the seller, and arrange an inspection to confirm functionality and fit for specific production requirements.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
This 3-axis IMA BIMA 610 V CNC Wood Machining Centre was manufactured in 1996. It features a working area of 4000 mm in the X-axis and 1200 mm in the Y-axis, with a maximum drilling diameter of 45 mm. The machine is equipped with 5 drilling spindles in the X direction and 11 in the Y direction. If you are looking to get high-quality wood machining capabilities, consider the IMA BIMA 610 V machine we have for sale. Contact us for further details.CNC Control: NUM CNC Control
Drive System: Siemens SIMODRIVE 611
Maximum Workpiece Length: 4000 mm
Minimum Workpiece Length: 150 mm
Maximum Workpiece Width: 1650 mm
Minimum Workpiece Thickness: 10 mm
Maximum Workpiece Thickness: 65 mm
Drilling Spindles (X): 5
Drilling Spindles (Y): 11
Maximum Drilling Diameter: 45 mm
Main Spindle Power: 7.5 kW
Main Spindle Motor: Water-cooled
Tool Holder: HSK F63 DIN 69893
Feed Drive Motor Power: 4 kW
Feed Speed: 1,500–18,000 mm/min
Maximum Tool Weight: 5 kg
Maximum Tool Clamping Force: 10,000 N
Operating Voltage: 400 V ±5%
Supply Voltage: 3/N/PE, 400 V, 50 Hz
Frequency: 50 Hz
Total Connected Load: 33 kVA
Rated Power: 41 kW
Rated Current: 62 A
Connection Cross Section: 16 mm²
Control Voltage: 24 V
Control Current: 52 A
Compressed Air Pressure: 6–10 bar
Air Connection: 1/2"
Required Air Consumption: 28 m³/h
Dust Extraction Connection: Ø100–300 mm
Air Flow Ø100: 14 m³/min
Air Flow Ø140: 28 m³/min
Air Flow Ø160: 36 m³/min
Air Flow Ø180: 46 m³/min
Air Flow Ø200: 56 m³/min
Air Flow Ø280: 105 m³/min
Air Flow Ø300: 127 m³/min
Number of Dust Extraction Ports: 1
Machine Condition: Disassembled but fully functional
Optional Equipment, not included:
Vacuum block suction cups (aluminum) and sliding console
Two milling spindles for synchronous milling with integrated tool changers
Safety fence with associated safety mats
Control cabinet and operating unit
Waste conveyor belt for milled sections
Machine Height: 3100 mm
Machine Weight: 7500 kg
Number of Axes: 3
Tool Stations: 5
Spindle Power: 7.5 kW
Spindle Speed: 18000 RPM
Table Length: 4000 mm
Table Width: 1200 mm
X-axis Travel: 4000 mm
Y-axis Travel: 1200 mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2095 |
| Last activity | Oct. 27, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
This 3-axis IMA BIMA 610 V CNC Wood Machining Centre was manufactured in 1996. It features a working area of 4000 mm in the X-axis and 1200 mm in the Y-axis, with a maximum drilling diameter of 45 mm. The machine is equipped with 5 drilling spindles in the X direction and 11 in the Y direction. If you are looking to get high-quality wood machining capabilities, consider the IMA BIMA 610 V machine we have for sale. Contact us for further details.CNC Control: NUM CNC Control
Drive System: Siemens SIMODRIVE 611
Maximum Workpiece Length: 4000 mm
Minimum Workpiece Length: 150 mm
Maximum Workpiece Width: 1650 mm
Minimum Workpiece Thickness: 10 mm
Maximum Workpiece Thickness: 65 mm
Drilling Spindles (X): 5
Drilling Spindles (Y): 11
Maximum Drilling Diameter: 45 mm
Main Spindle Power: 7.5 kW
Main Spindle Motor: Water-cooled
Tool Holder: HSK F63 DIN 69893
Feed Drive Motor Power: 4 kW
Feed Speed: 1,500–18,000 mm/min
Maximum Tool Weight: 5 kg
Maximum Tool Clamping Force: 10,000 N
Operating Voltage: 400 V ±5%
Supply Voltage: 3/N/PE, 400 V, 50 Hz
Frequency: 50 Hz
Total Connected Load: 33 kVA
Rated Power: 41 kW
Rated Current: 62 A
Connection Cross Section: 16 mm²
Control Voltage: 24 V
Control Current: 52 A
Compressed Air Pressure: 6–10 bar
Air Connection: 1/2"
Required Air Consumption: 28 m³/h
Dust Extraction Connection: Ø100–300 mm
Air Flow Ø100: 14 m³/min
Air Flow Ø140: 28 m³/min
Air Flow Ø160: 36 m³/min
Air Flow Ø180: 46 m³/min
Air Flow Ø200: 56 m³/min
Air Flow Ø280: 105 m³/min
Air Flow Ø300: 127 m³/min
Number of Dust Extraction Ports: 1
Machine Condition: Disassembled but fully functional
Optional Equipment, not included:
Vacuum block suction cups (aluminum) and sliding console
Two milling spindles for synchronous milling with integrated tool changers
Safety fence with associated safety mats
Control cabinet and operating unit
Waste conveyor belt for milled sections
Machine Height: 3100 mm
Machine Weight: 7500 kg
Number of Axes: 3
Tool Stations: 5
Spindle Power: 7.5 kW
Spindle Speed: 18000 RPM
Table Length: 4000 mm
Table Width: 1200 mm
X-axis Travel: 4000 mm
Y-axis Travel: 1200 mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Machine: IMA BIMA 610 V CNC wood machining centre (manufacturer: IMA, year manufactured: 1996). This listing describes a 3-axis CNC centre with a long X travel intended for panel and long-workpiece processing.
Key specifications
- Axes: 3
- X travel / table length: 4000 mm
- Y travel / table width: 1200 mm
- Z travel: not specified
- Machine height: 3100 mm
- Machine weight: 7500 kg
- CNC control: NUM
- Drive system: Siemens SIMODRIVE 611
Workpiece capacity
- Maximum workpiece length: 4000 mm
- Minimum workpiece length: 150 mm
- Maximum workpiece width: 1650 mm
- Minimum workpiece thickness: 10 mm
- Maximum workpiece thickness: 65 mm
Spindles, tooling and feeds
- Main spindle power: 7.5 kW (water-cooled main spindle motor)
- Main spindle speed: up to 18,000 RPM
- Tool holder: HSK F63 (DIN 69893)
- Maximum tool weight: 5 kg
- Maximum tool clamping force: 10,000 N
- Feed drive motor power: 4 kW
- Feed speed range: 1,500–18,000 mm/min
- Tool stations / tool positions listed: 5
Drilling and extraction
- Drilling spindles X-direction: 5
- Drilling spindles Y-direction: 11
- Maximum drilling diameter: 45 mm
- Dust extraction: one port; recommended connection diameters and corresponding airflows provided (Ø100–300 mm listed; detailed flow rates included in specification)
Utilities and electrical
- Operating / supply voltage: 3/N/PE, 400 V ±5%, 50 Hz
- Total connected load: 33 kVA; rated power: 41 kW; rated current: 62 A
- Control voltage: 24 V
- Compressed air: 6–10 bar; required air consumption: 28 m³/h; air connection: 1/2"
Condition and equipment notes
- The machine is listed as disassembled. No independent test or functional status beyond that listing is provided here. Avoid assuming operational status without inspection or seller confirmation.
- Optional equipment (not included): vacuum block suction cups (aluminium) and sliding console; two milling spindles for synchronous milling with integrated tool changers; safety fence with associated safety mats; control cabinet and operating unit; waste conveyor belt for milled sections.
Remarks
This specification consolidates the technical details provided for the IMA BIMA 610 V. Interested parties should verify the machine condition, component completeness and availability of any optional equipment directly with the seller, and arrange an inspection to confirm functionality and fit for specific production requirements.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2095 |
| Last activity | Oct. 27, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
CNC дървообработващ център IMA BIMA 610 V
CNC obráběcí centrum na dřevo IMA BIMA 610 V
IMA BIMA 610 V CNC-træbearbejdningscenter
IMA BIMA 610 V CNC-Holzbearbeitungszentrum
Κέντρο κατεργασίας CNC ξύλου IMA BIMA 610 V
IMA BIMA 610 V Wood CNC machining center
Centro de mecanizado CNC para madera IMA BIMA 610 V
Centre d’usinage CNC bois IMA BIMA 610 V
CNC obradno središte za drvo IMA BIMA 610 V
IMA BIMA 610 V CNC faipari megmunkálóközpont
Centro di lavoro CNC per legno IMA BIMA 610 V
IMA BIMA 610 V CNC medienos apdirbimo centras
IMA BIMA 610 V CNC-houtbewerkingscentrum
CNC centrum obróbcze do drewna IMA BIMA 610 V
Centro de usinagem CNC para madeira IMA BIMA 610 V
Centru de prelucrare CNC pentru lemn IMA BIMA 610 V
IMA BIMA 610 V Деревообрабатывающий обрабатывающий центр с ЧПУ
CNC obradni centar za drvo IMA BIMA 610 V
IMA BIMA 610 V CNC-träbearbetningscenter
CNC ahşap işleme merkezi IMA BIMA 610 V
EN
- Languages
English (GB)