Contact us to receive an offer.
| Manufacturer | IKA |
|---|---|
| Model | MHD 2000/20 |
| Year | 2003 |
| Location | Netherlands
|
| Category | Beaters / mixers / tumblers |
| Capacity | 7000 L |
| Tank Material | stainless steel |
| Rpm | 3000 rpm |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | IKA MHD 2000/20 |
| Last availability date | 18/10/2026 |
| Product id | P260829150 |
| Language |
Миксер IKA MHD 2000/20
Mixér IKA MHD 2000/20
IKA MHD 2000/20 Blander
IKA MHD 2000/20 Mixer
Αναμικτής IKA MHD 2000/20
IKA MHD 2000/20 Mixer
Batan mezclador IKA MHD 2000/20
Mixeur IKA MHD 2000/20
Mikser IKA MHD 2000/20
IKA MHD 2000/20 Keverő
Mescolatore IKA MHD 2000/20
IKA MHD 2000/20 Maišytuvas
IKA MHD 2000/20 Menger
Masownica IKA MHD 2000/20
Misturador IKA MHD 2000/20
Mixer IKA MHD 2000/20
IKA MHD 2000/20 Миксер
Mikser IKA MHD 2000/20
IKA MHD 2000/20 Mixer
Mikser IKA MHD 2000/20
|
Offer title: IKA MHD 2000/20 Mixer
Brand: IKA
Type / Model: MHD 2000/20
Year of manufacture: 2003
Technical condition: As‑is, where‑is
Overview
This is an IKA MHD 2000/20 dosing, dissolving and mixing set intended for automatic dissolving of powders into a liquid. The unit was originally used for applications such as whey powder, vitamins and sugar and is configured to handle multiple powders fed into a liquid stream and dissolved in a dedicated mixing head.
Key features and main components
- Powder funnel / separator: Aso tpe KPL A22 with vibratory motor (type AAS 0.5 Gr.2)
- Powder lock for powdered ingredient feeding
- Two dosing worms (double worm) located under a funnel, type Azodos P30/2
- Small dosing screw for vitamins
- Special mixing head where powders and liquid are combined
- Disperser (dispergator) with flush seal, rated 15 kW, 3,000 rpm; butterfly valve on inlet and a by‑pass valve for cleaning
Product heating and heat exchange
- Plate heat exchanger: Tetra Clip8‑RH (bj2000), single section
- Hot water set configured to be used on the outlet (listed temperature range 45→73°C, flow 7,000 L/hour); the heat set can also be used on the inlet to preheat product
- Water circulation pump (KSB)
- Steam control valve, stainless steel expansion vessel and steam/hot water heat exchanger (Tetra CB)
Exclusions
- Pump on outgoing product and by‑pass valve are excluded (noted as crossed out on P&ID).
Notes
- Technical condition is listed as “As‑is, where‑is.” No claims are made about operational status, testing, refurbishment or warranty. All information above is taken from the provided equipment description.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Offer title: IKA MHD 2000/20 Mixer
Brand: IKA
Type: MHD 2000/20
Model: MHD 2000/20
Year of manufacture: 2003
Technical condition: As-is, where-is
RPM: 3000
Overview: Dosing, dissolving and mixing set for automatic dissolving of powders in a liquid; originally used for whey powder, vitamins and sugar
Dosing and feeding: Whey powder and sugar are dosed by powder lock and dosing screw; vitamins with a small dosing screw
Mixing and preheating: The powders come together with the liquid in the special mixing head; the liquid can be preheated by a plate exchanger to the desired dissolving temperature
Main components: Powder funnel/separator Aso tpe KPL A22 with vibratory motor; Powder lock; 2 Dosing worms under a funnel type Azodos P30/2; Disperser with flush seal, 15 kW, 3,000 rpm, butterfly valve on inlet, by-pass valve for cleaning
Product heater and heat exchange: Product heater with plate heat exchanger (Tetra Clip8-RH, bj2000), 1 section and hot water set used on outlet from 45–73°C, 7,000 L/hour; can also be used on inlet to heat product; plus hot water set, water circulation pump (KSB), steam control valve, stainless steel expansion vessel and heat exchanger steam/hot water (Tetra CB)
Exclusions: Pump on outgoing product, by-pass valve (crossed out on P&ID)
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
What is the condition of this IKA MHD 2000/20 mixer?
This IKA MHD 2000/20 mixer is offered in the condition 'as is'.
What is the listing reference for this IKA MHD 2000/20 mixer?
This IKA MHD 2000/20 mixer has listing reference STN15606.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 321 |
| Last activity | Oct. 22, 2026 |
Offer title: IKA MHD 2000/20 Mixer
Brand: IKA
Type: MHD 2000/20
Model: MHD 2000/20
Year of manufacture: 2003
Technical condition: As-is, where-is
RPM: 3000
Overview: Dosing, dissolving and mixing set for automatic dissolving of powders in a liquid; originally used for whey powder, vitamins and sugar
Dosing and feeding: Whey powder and sugar are dosed by powder lock and dosing screw; vitamins with a small dosing screw
Mixing and preheating: The powders come together with the liquid in the special mixing head; the liquid can be preheated by a plate exchanger to the desired dissolving temperature
Main components: Powder funnel/separator Aso tpe KPL A22 with vibratory motor; Powder lock; 2 Dosing worms under a funnel type Azodos P30/2; Disperser with flush seal, 15 kW, 3,000 rpm, butterfly valve on inlet, by-pass valve for cleaning
Product heater and heat exchange: Product heater with plate heat exchanger (Tetra Clip8-RH, bj2000), 1 section and hot water set used on outlet from 45–73°C, 7,000 L/hour; can also be used on inlet to heat product; plus hot water set, water circulation pump (KSB), steam control valve, stainless steel expansion vessel and heat exchanger steam/hot water (Tetra CB)
Exclusions: Pump on outgoing product, by-pass valve (crossed out on P&ID)
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
What is the condition of this IKA MHD 2000/20 mixer?
This IKA MHD 2000/20 mixer is offered in the condition 'as is'.
What is the listing reference for this IKA MHD 2000/20 mixer?
This IKA MHD 2000/20 mixer has listing reference STN15606.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Category | Beaters / mixers / tumblers |
| Capacity | 7000 L |
| Tank Material | stainless steel |
| Rpm | 3000 rpm |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | IKA MHD 2000/20 |
| Last availability date | 18/10/2026 |
| Product id | P260829150 |
| Language |
Миксер IKA MHD 2000/20
Mixér IKA MHD 2000/20
IKA MHD 2000/20 Blander
IKA MHD 2000/20 Mixer
Αναμικτής IKA MHD 2000/20
IKA MHD 2000/20 Mixer
Batan mezclador IKA MHD 2000/20
Mixeur IKA MHD 2000/20
Mikser IKA MHD 2000/20
IKA MHD 2000/20 Keverő
Mescolatore IKA MHD 2000/20
IKA MHD 2000/20 Maišytuvas
IKA MHD 2000/20 Menger
Masownica IKA MHD 2000/20
Misturador IKA MHD 2000/20
Mixer IKA MHD 2000/20
IKA MHD 2000/20 Миксер
Mikser IKA MHD 2000/20
IKA MHD 2000/20 Mixer
Mikser IKA MHD 2000/20
|
Offer title: IKA MHD 2000/20 Mixer
Brand: IKA
Type / Model: MHD 2000/20
Year of manufacture: 2003
Technical condition: As‑is, where‑is
Overview
This is an IKA MHD 2000/20 dosing, dissolving and mixing set intended for automatic dissolving of powders into a liquid. The unit was originally used for applications such as whey powder, vitamins and sugar and is configured to handle multiple powders fed into a liquid stream and dissolved in a dedicated mixing head.
Key features and main components
- Powder funnel / separator: Aso tpe KPL A22 with vibratory motor (type AAS 0.5 Gr.2)
- Powder lock for powdered ingredient feeding
- Two dosing worms (double worm) located under a funnel, type Azodos P30/2
- Small dosing screw for vitamins
- Special mixing head where powders and liquid are combined
- Disperser (dispergator) with flush seal, rated 15 kW, 3,000 rpm; butterfly valve on inlet and a by‑pass valve for cleaning
Product heating and heat exchange
- Plate heat exchanger: Tetra Clip8‑RH (bj2000), single section
- Hot water set configured to be used on the outlet (listed temperature range 45→73°C, flow 7,000 L/hour); the heat set can also be used on the inlet to preheat product
- Water circulation pump (KSB)
- Steam control valve, stainless steel expansion vessel and steam/hot water heat exchanger (Tetra CB)
Exclusions
- Pump on outgoing product and by‑pass valve are excluded (noted as crossed out on P&ID).
Notes
- Technical condition is listed as “As‑is, where‑is.” No claims are made about operational status, testing, refurbishment or warranty. All information above is taken from the provided equipment description.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 321 |
| Last activity | Oct. 22, 2026 |
EN
- Languages
English (GB)