Contact us to receive an offer.
| Manufacturer | Hyundai |
|---|---|
| Model | SPT-V100 |
| Year | 2006 |
| Location | Germany
|
This listing is for a Hyundai SPT-V100 vertical CNC machining center manufactured in 2006. The machine features a CNC control system with a YASNAC-J50M controller, offering precise and automated machining capabilities. It has a working travel range of 800 mm along the X-axis, 460 mm along the Y-axis, and 620 mm along the Z-axis. The machine’s table measures 1100 mm in length and 460 mm in width, with a maximum load capacity of 800 kg, suitable for a variety of medium-sized workpieces.
The spindle supports speeds from 30 up to 10,000 rpm and uses a BT40 tool holder, compatible with a 24-pocket tool magazine. It is capable of drilling up to 40 mm in diameter and thread cutting up to M36. The spindle nose to table distance is 150 mm. Feed speeds are continuously variable up to 8 m/min with rapid traverse rates of 30 m/min on X and Y axes and 24 m/min on the Z axis.
Additional features include a chip conveyor equipped with a cooling water tank, interior lighting for improved visibility, and operation via a swiveling control panel. The machine is equipped with a compressed air connection and includes approximately 26 clamping pins for workpiece securing. The machine’s total power requirement is 30 kVA, and it weighs approximately 5,000 kg. Its overall dimensions are roughly 2.9 m long, 2.5 m wide, and 2.85 m high.
The enclosed machining area features a door with a viewing window, ensuring safety and visibility during operation. The control panel is located on the right side and includes a display screen with multiple buttons for ease of use. The machine appears clean and well-maintained, with no visible damage. Cables and hoses at the back are connected and organized, and warning signs indicate electrical hazards and operational safety measures.
Operating hours displayed on the control screen show a total power-on time of approximately 7,148 hours, cycle start time of about 1,317 hours, and feed cutting time of around 761 hours. This machine is suitable for users seeking a reliable vertical machining center with a good balance of size, capacity, and performance.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Make: Hyundai
Type: SPT-V100
Year of construction: 08/2006
Control type: CNC
x-travel: 800 mm
y-travel: 460 mm
z-travel: 620 mm
Controller: YASNAC-J50M
Table size: 1100 x 460 mm
Table load: 800 kg
Tool holder: BT40
Speed: 30 - 10,000 rpm.
Spindle head: MAS / BT 40
Distance spindle nose and table: 150 mm
Feed speeds continuously: 8 m/min.
Rapid traverse:: x+y+z: 30+30+24 m/min
Tool magazine with: 24
Spindle operating hours: 1317 h
Operating hours Switch-on hours: 7148 h
Compressed air connection: yes
Total power requirement: 30 (kVA)
Machine weight approx.: 5.0 t
Machine dimensions approx. LxWxH: 2.9 x 2.5 x 2.85 m
Dimensions chip conveyor LxWxH: 3.0 x 0.9 x 1.3 m
Further information
CNC machining center vertical
further technical features:
max. drill Ø 40mm
Facing 245 cc/min. (cm³/min)
Thread cutting up to M 36
Compressed air connection
Furnishing:
Chip conveyor with cooling water tank
Interior lighting
Operation via swiveling control panel
IKZ
Machine feet
Accesories:
approx. 26 clamping pins
i.D.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2015 |
| Offers online | 120 |
| Last activity | Nov. 2, 2026 |
Make: Hyundai
Type: SPT-V100
Year of construction: 08/2006
Control type: CNC
x-travel: 800 mm
y-travel: 460 mm
z-travel: 620 mm
Controller: YASNAC-J50M
Table size: 1100 x 460 mm
Table load: 800 kg
Tool holder: BT40
Speed: 30 - 10,000 rpm.
Spindle head: MAS / BT 40
Distance spindle nose and table: 150 mm
Feed speeds continuously: 8 m/min.
Rapid traverse:: x+y+z: 30+30+24 m/min
Tool magazine with: 24
Spindle operating hours: 1317 h
Operating hours Switch-on hours: 7148 h
Compressed air connection: yes
Total power requirement: 30 (kVA)
Machine weight approx.: 5.0 t
Machine dimensions approx. LxWxH: 2.9 x 2.5 x 2.85 m
Dimensions chip conveyor LxWxH: 3.0 x 0.9 x 1.3 m
Further information
CNC machining center vertical
further technical features:
max. drill Ø 40mm
Facing 245 cc/min. (cm³/min)
Thread cutting up to M 36
Compressed air connection
Furnishing:
Chip conveyor with cooling water tank
Interior lighting
Operation via swiveling control panel
IKZ
Machine feet
Accesories:
approx. 26 clamping pins
i.D.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
This listing is for a Hyundai SPT-V100 vertical CNC machining center manufactured in 2006. The machine features a CNC control system with a YASNAC-J50M controller, offering precise and automated machining capabilities. It has a working travel range of 800 mm along the X-axis, 460 mm along the Y-axis, and 620 mm along the Z-axis. The machine’s table measures 1100 mm in length and 460 mm in width, with a maximum load capacity of 800 kg, suitable for a variety of medium-sized workpieces.
The spindle supports speeds from 30 up to 10,000 rpm and uses a BT40 tool holder, compatible with a 24-pocket tool magazine. It is capable of drilling up to 40 mm in diameter and thread cutting up to M36. The spindle nose to table distance is 150 mm. Feed speeds are continuously variable up to 8 m/min with rapid traverse rates of 30 m/min on X and Y axes and 24 m/min on the Z axis.
Additional features include a chip conveyor equipped with a cooling water tank, interior lighting for improved visibility, and operation via a swiveling control panel. The machine is equipped with a compressed air connection and includes approximately 26 clamping pins for workpiece securing. The machine’s total power requirement is 30 kVA, and it weighs approximately 5,000 kg. Its overall dimensions are roughly 2.9 m long, 2.5 m wide, and 2.85 m high.
The enclosed machining area features a door with a viewing window, ensuring safety and visibility during operation. The control panel is located on the right side and includes a display screen with multiple buttons for ease of use. The machine appears clean and well-maintained, with no visible damage. Cables and hoses at the back are connected and organized, and warning signs indicate electrical hazards and operational safety measures.
Operating hours displayed on the control screen show a total power-on time of approximately 7,148 hours, cycle start time of about 1,317 hours, and feed cutting time of around 761 hours. This machine is suitable for users seeking a reliable vertical machining center with a good balance of size, capacity, and performance.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2015 |
| Offers online | 120 |
| Last activity | Nov. 2, 2026 |
Обработващ център - вертикален Hyundai SPT-V100
Obráběcí centrum - vertikální Hyundai SPT-V100
Bearbejdningscenter - lodret Hyundai SPT-V100
Hyundai SPT-V100 Bearbeitungszentrum Vertikal
Κέντρο κατεργασίας - κατακόρυφο Hyundai SPT-V100
Hyundai SPT-V100 Machining center - vertical
Centro de mecanizado vertical Hyundai SPT-V100
Centre d'usinage vertical Hyundai SPT-V100
Obradni centar - vertikalni Hyundai SPT-V100
Hyundai SPT-V100 Megmunkáló központ - függőleges
Centro di lavoro verticale Hyundai SPT-V100
Apdirbimo centras – vertikalus Hyundai SPT-V100
Hyundai SPT-V100 Bewerkingscentrum - verticaal
Pionowe centrum obróbcze Hyundai SPT-V100
Centro de usinagem - vertical Hyundai SPT-V100
Centru de prelucrare - vertical Hyundai SPT-V100
Hyundai SPT-V100 Вертикальный обрабатывающий центр
Obradni centar - vertikalni Hyundai SPT-V100
Hyundai SPT-V100 Bearbetningscentrum - vertikalt
Dikey işleme merkezi Hyundai SPT-V100
EN
- Languages
English (GB)