Contact us to receive an offer.
| Manufacturer | HWACHEON |
|---|---|
| Model | Vesta 1000 12K |
| Year | 2016 |
| Location | Czech Republic
|
This listing is for a Hwacheon Vesta 1000 12K vertical machining center, manufactured in 2016. It features a robust construction with machine dimensions of 3335 mm in length, 2200 mm in width, and 2670 mm in height, and a total weight of 6500 kg. The machining center is equipped with a worktable measuring 1100 mm in length and 502 mm in width, capable of supporting a maximum evenly distributed load of 700 kg.
The machine provides travel distances of 1000 mm along the X-axis, 550 mm along the Y-axis, and 500 mm along the Z-axis. It includes a spindle with a maximum speed of 12,000 rpm and a BT 40 taper. Tool changing is facilitated by a 24-position tool changer, allowing for a variety of machining operations without manual intervention.
The control system is a Fanuc 0i-MD, supporting 4-axis machining capabilities. The machine is equipped with a tool probe and a workpiece probe to assist in precise machining and setup.
From the images, the machine appears to be in clean and well-maintained condition with no visible damage. The front door includes a viewing window to monitor the machining process safely. The control panel features a display screen, keypad, various control buttons, knobs, and an emergency stop button located at the top right corner for safety. The machining area is enclosed, with the spindle and worktable visible when the door is open.
Operating hours are listed as 15,976 hours. Potential buyers should verify the machine's operational status and suitability for their specific requirements.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
s.r. Fanuc 0i-MD
4-axis TSUDAKOMA
Worktable length: 1,100 mm
Worktable width: 502 mm
Max. table load (evenly): 700 kg
Max. spindle speed: 12,000 1/min
X-axis travel: 1,000 mm
Y-axis travel: 550 mm
Z-axis travel: 500 mm
Spindle taper: BT 40
Tool changer 24 positions
Machine height: 2,670 mm
Machine length: 3,335 mm
Machine width: 2,200 mm
Machine weight: 6,500 kg
Accessories:
Tool probe
Workpiece probe
Operating hours: 15,976 h
Very good condition - possible to test.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2023 |
| Offers online | 77 |
| Last activity | Oct. 26, 2026 |
s.r. Fanuc 0i-MD
4-axis TSUDAKOMA
Worktable length: 1,100 mm
Worktable width: 502 mm
Max. table load (evenly): 700 kg
Max. spindle speed: 12,000 1/min
X-axis travel: 1,000 mm
Y-axis travel: 550 mm
Z-axis travel: 500 mm
Spindle taper: BT 40
Tool changer 24 positions
Machine height: 2,670 mm
Machine length: 3,335 mm
Machine width: 2,200 mm
Machine weight: 6,500 kg
Accessories:
Tool probe
Workpiece probe
Operating hours: 15,976 h
Very good condition - possible to test.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
This listing is for a Hwacheon Vesta 1000 12K vertical machining center, manufactured in 2016. It features a robust construction with machine dimensions of 3335 mm in length, 2200 mm in width, and 2670 mm in height, and a total weight of 6500 kg. The machining center is equipped with a worktable measuring 1100 mm in length and 502 mm in width, capable of supporting a maximum evenly distributed load of 700 kg.
The machine provides travel distances of 1000 mm along the X-axis, 550 mm along the Y-axis, and 500 mm along the Z-axis. It includes a spindle with a maximum speed of 12,000 rpm and a BT 40 taper. Tool changing is facilitated by a 24-position tool changer, allowing for a variety of machining operations without manual intervention.
The control system is a Fanuc 0i-MD, supporting 4-axis machining capabilities. The machine is equipped with a tool probe and a workpiece probe to assist in precise machining and setup.
From the images, the machine appears to be in clean and well-maintained condition with no visible damage. The front door includes a viewing window to monitor the machining process safely. The control panel features a display screen, keypad, various control buttons, knobs, and an emergency stop button located at the top right corner for safety. The machining area is enclosed, with the spindle and worktable visible when the door is open.
Operating hours are listed as 15,976 hours. Potential buyers should verify the machine's operational status and suitability for their specific requirements.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2023 |
| Offers online | 77 |
| Last activity | Oct. 26, 2026 |
Вертикален обработващ център HWACHEON Vesta 1000 12K
Vertikální obráběcí centrum HWACHEON Vesta 1000 12K
HWACHEON Vesta 1000 12K Lodret bearbejdningscenter
HWACHEON Vesta 1000 12K Vertikales Bearbeitungszentrum
Κάθετο κέντρο κατεργασίας HWACHEON Vesta 1000 12K
HWACHEON Vesta 1000 12K Vertical machining center
Centro de mecanizado vertical HWACHEON Vesta 1000 12K
Centre d'usinage vertical HWACHEON Vesta 1000 12K
Vertikalni obradni centar HWACHEON Vesta 1000 12K
HWACHEON Vesta 1000 12K Függőleges megmunkáló központ
Centro di lavoro verticale HWACHEON Vesta 1000 12K
Vertikalus apdirbimo centras HWACHEON Vesta 1000 12K
HWACHEON Vesta 1000 12K Verticaal bewerkingscentrum
Pionowe centrum obróbcze HWACHEON Vesta 1000 12K
Centro de maquinação vertical HWACHEON Vesta 1000 12K
Centru de prelucrare vertical HWACHEON Vesta 1000 12K
HWACHEON Vesta 1000 12K Вертикальный обрабатывающий центр
Vertikalni obradni centar HWACHEON Vesta 1000 12K
HWACHEON Vesta 1000 12K Vertikalt bearbetningscenter
Dikey işleme merkezi HWACHEON Vesta 1000 12K
EN
- Languages
English (GB)