| Manufacturer | Hurco |
|---|---|
| Model | VMX64 |
| Year | 2000 |
| Location | Germany
|
This Hurco VMX64 is a 3-axis vertical machining centre manufactured in 2000. It has X-axis travel of 1,625 mm, Y-axis travel of 864 mm, and Z-axis travel of 762 mm. The table measures 1,676 × 889 mm, with a stated maximum load of approximately 2,500 kg. The machine is equipped with a 40-position tool changer and has a maximum spindle speed of 12,444 rpm. The stated tool taper is SK 40.
The control is described as HURCO Ultimax with WinMax; the hard drive has been replaced and WinMax reinstalled. Listed programming options include conversational and DIN/ISO (G-code) programming. The control arrangement includes two screens and an electronic handwheel. A separate operator console is positioned at the front of the machine. The spindle head and circular tool magazine are inside the enclosed machining area.
Included equipment is listed as a chip conveyor, a KNOLL PF 350/1050 gravity paper-band coolant and filtration system, a HABOR spindle cooler, and a SARA UC350/03 oil-mist extractor. The KNOLL filter is described as having a capacity of up to 350 l/min of emulsion. The stated power connection is 3 × 400 V.
The enclosure and interior show dirt, staining, dark residue, and paint wear. The lower panels are marked, and the viewing window appears cloudy or stained. The machining enclosure is shown open, exposing the spindle area and tool magazine. This machine is offered with the equipment and configuration described above; its operational status is not specified.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
This 3-axis Hurco VMX64 was manufactured in 2000. It features a travel of 1,625 mm in the X-axis, 864 mm in the Y-axis, and 762 mm in the Z-axis. The machine includes a table size of 1,676 x 889 mm and a maximum table load of approximately 2,500 kg. If you are looking to get high-quality machining capabilities, consider the Hurco VMX64 vertical machining centre we have for sale. Contact us for further details.- Control: HURCO Ultimax with WinMax (hard drive replaced, WinMax reinstalled)
- Conversational and DIN/ISO programming (G-code), two screens, electronic handwheel
- Tool taper: SK 40
- Tool changer: 40 stations
- Power connection: 3 x 400 V EQUIPMENT
- Chip conveyor
- Coolant/filtration system KNOLL gravity paper band filter type PF 350/1050, YOM 2007 (filter capacity up to 350 l/min emulsion)
- Spindle cooler (HABOR)
- Oil mist extractor SARA (Type UC350/03)
Number of Axes: 3
Spindle Speed: 12444 RPM
Table Length: 889 mm
Table Load: 2500 kg
Table Width: 1676 mm
Taper Size: SK 40
X-axis Travel: 1625 mm
Y-axis Travel: 864 mm
Z-axis Travel: 762 mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2032 |
| Last activity | Nov. 3, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
This 3-axis Hurco VMX64 was manufactured in 2000. It features a travel of 1,625 mm in the X-axis, 864 mm in the Y-axis, and 762 mm in the Z-axis. The machine includes a table size of 1,676 x 889 mm and a maximum table load of approximately 2,500 kg. If you are looking to get high-quality machining capabilities, consider the Hurco VMX64 vertical machining centre we have for sale. Contact us for further details.- Control: HURCO Ultimax with WinMax (hard drive replaced, WinMax reinstalled)
- Conversational and DIN/ISO programming (G-code), two screens, electronic handwheel
- Tool taper: SK 40
- Tool changer: 40 stations
- Power connection: 3 x 400 V EQUIPMENT
- Chip conveyor
- Coolant/filtration system KNOLL gravity paper band filter type PF 350/1050, YOM 2007 (filter capacity up to 350 l/min emulsion)
- Spindle cooler (HABOR)
- Oil mist extractor SARA (Type UC350/03)
Number of Axes: 3
Spindle Speed: 12444 RPM
Table Length: 889 mm
Table Load: 2500 kg
Table Width: 1676 mm
Taper Size: SK 40
X-axis Travel: 1625 mm
Y-axis Travel: 864 mm
Z-axis Travel: 762 mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
This Hurco VMX64 is a 3-axis vertical machining centre manufactured in 2000. It has X-axis travel of 1,625 mm, Y-axis travel of 864 mm, and Z-axis travel of 762 mm. The table measures 1,676 × 889 mm, with a stated maximum load of approximately 2,500 kg. The machine is equipped with a 40-position tool changer and has a maximum spindle speed of 12,444 rpm. The stated tool taper is SK 40.
The control is described as HURCO Ultimax with WinMax; the hard drive has been replaced and WinMax reinstalled. Listed programming options include conversational and DIN/ISO (G-code) programming. The control arrangement includes two screens and an electronic handwheel. A separate operator console is positioned at the front of the machine. The spindle head and circular tool magazine are inside the enclosed machining area.
Included equipment is listed as a chip conveyor, a KNOLL PF 350/1050 gravity paper-band coolant and filtration system, a HABOR spindle cooler, and a SARA UC350/03 oil-mist extractor. The KNOLL filter is described as having a capacity of up to 350 l/min of emulsion. The stated power connection is 3 × 400 V.
The enclosure and interior show dirt, staining, dark residue, and paint wear. The lower panels are marked, and the viewing window appears cloudy or stained. The machining enclosure is shown open, exposing the spindle area and tool magazine. This machine is offered with the equipment and configuration described above; its operational status is not specified.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2032 |
| Last activity | Nov. 3, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
Вертикален обработващ център Hurco VMX64
Vertikální obráběcí centrum Hurco VMX64
Hurco VMX64 Lodret bearbejdningscenter
Hurco VMX64 Vertikales Bearbeitungszentrum
Κάθετο κέντρο κατεργασίας Hurco VMX64
Hurco VMX64 Vertical machining center
Centro de mecanizado vertical Hurco VMX64
Centre d'usinage vertical Hurco VMX64
Vertikalni obradni centar Hurco VMX64
Hurco VMX64 Függőleges megmunkáló központ
Centro di lavoro verticale Hurco VMX64
Hurco VMX64 Vertikalus apdirbimo centras
Hurco VMX64 Verticaal bewerkingscentrum
Pionowe centrum obróbcze Hurco VMX64
Centro de usinagem vertical Hurco VMX64
Centru de prelucrare vertical Hurco VMX64
Hurco VMX64 Вертикальный обрабатывающий центр
Vertikalni obradni centar Hurco VMX64
Hurco VMX64 Vertikalt bearbetningscenter
Dikey işleme merkezi Hurco VMX64
EN
- Languages
English (GB)