| Manufacturer | HUNDEGGER |
|---|---|
| Model | K2-A |
| Year | 2000 |
| Location | Germany
|
Model: HUNDEGGER K2-A (manufactured 2000)
Overview:
This listing describes a 4-axis HUNDEGGER K2-A joinery machine configured as a fully automatic CNC joinery/wood machining center. The specification set below covers workpiece capacities, electrical and utility requirements, transport and machine dimensions, and included machining components and units as listed in the provided description.
Key machining capacities and axis information:
- Machine Type: Fully Automatic Joinery Machine
- Number of Axes: 4
- Workpiece cross-section (min): 20 x 50 mm
- Workpiece cross-section (max): 300 x 450 mm
- Minimum workpiece length (automatic mode): 0.3 m (300 mm)
Electrical, pneumatic and hydraulic requirements:
- Operating voltage: 400 / 230 V (3/N/PE)
- Electrical frequency: 50 Hz
- Fusing protection: 3 x 63 A
- Peak power requirement: 15 kW
- Operating compressed air pressure: 8.5 bar (maximum 10 bar)
- Compressed air flow requirement: > 600 l/min
- Hydraulic operating pressure: 100 bar
- Noise emission level (LpA): 79 dB(A) ± 3 dB(A)
Dimensions and weight:
- Transport dimensions (L x W x H): 12.00 m x 2.40 m x 2.55 m
- Machine length: 12000 mm
- Machine width: 2400 mm
- Machine height: 2550 mm
- Machine weight: 13000 kg
Included / equipping components (as listed):
- Under-table swivel cut-off saw with HM saw blade (D = 735 mm, s = 6.0 mm)
- Universal milling unit with cylindrical cutterhead (D = 350 mm, B = 120 mm)
- Vertical combo support
- Horizontal combo support
- Rafter nail drilling unit
- Slotting / mortising unit
- Infeed and outflow conveyors / positioning trolleys
Notes:
- The information above is taken from the provided product description. No additional condition, testing, service history or operational status is specified in the available description; such information should be requested or verified prior to purchase.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
This 4-axis HUNDEGGER K2-A was manufactured in 2000. It features a workpiece cross-section capacity ranging from 20 x 50 mm to 300 x 450 mm, with a minimum workpiece length of 300 mm in automatic mode. The machine includes various components such as an under-table swivel cut-off saw and a universal milling unit. If you are looking to get high-quality CNC wood machining capabilities, consider the HUNDEGGER K2-A machine we have for sale. Contact us for further details.- Machine Type: Fully Automatic Joinery Machine
- Workpiece Cross-Section Min.: 20 x 50 mm
- Workpiece Cross-Section Max.: 300 x 450 mm
- Minimum Workpiece Length (Automatic Mode): 0.3 m (300 mm)
- Operating Voltage: 400 / 230 V (3/N/PE)
- Electrical Frequency: 50 Hz
- Fusing Protection: 3 x 63 A
- Peak Power Requirement: 15 kW
- Operating Compressed Air Pressure: 8.5 bar (Max: 10 bar)
- Compressed Air Flow Requirement: > 600 l/min
- Hydraulic Operating Pressure: 100 bar
- Noise Emission Level (LpA): 79 dB(A) ± 3 dB(A)
- Transport Dimensions (L x W x H): 12.00 m x 2.40 m x 2.55 m
- Included / Equipping Components:
* Under-table Swivel Cut-Off Saw with HM saw blade (D=735 mm, s=6.0 mm)
* Universal Milling Unit with cylindrical cutterhead (D=350 mm, B=120 mm)
* Vertical Combo Support
* Horizontal Combo Support
* Rafter Nail Drilling Unit
* Slotting / Mortising Unit
* Infeed & Outflow Conveyors / Positioning Trolleys
Machine Height: 2550 mm
Machine Length: 12000 mm
Machine Weight: 13000 kg
Machine Width: 2400 mm
Number of Axes: 4
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2049 |
| Last activity | Nov. 7, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
This 4-axis HUNDEGGER K2-A was manufactured in 2000. It features a workpiece cross-section capacity ranging from 20 x 50 mm to 300 x 450 mm, with a minimum workpiece length of 300 mm in automatic mode. The machine includes various components such as an under-table swivel cut-off saw and a universal milling unit. If you are looking to get high-quality CNC wood machining capabilities, consider the HUNDEGGER K2-A machine we have for sale. Contact us for further details.- Machine Type: Fully Automatic Joinery Machine
- Workpiece Cross-Section Min.: 20 x 50 mm
- Workpiece Cross-Section Max.: 300 x 450 mm
- Minimum Workpiece Length (Automatic Mode): 0.3 m (300 mm)
- Operating Voltage: 400 / 230 V (3/N/PE)
- Electrical Frequency: 50 Hz
- Fusing Protection: 3 x 63 A
- Peak Power Requirement: 15 kW
- Operating Compressed Air Pressure: 8.5 bar (Max: 10 bar)
- Compressed Air Flow Requirement: > 600 l/min
- Hydraulic Operating Pressure: 100 bar
- Noise Emission Level (LpA): 79 dB(A) ± 3 dB(A)
- Transport Dimensions (L x W x H): 12.00 m x 2.40 m x 2.55 m
- Included / Equipping Components:
* Under-table Swivel Cut-Off Saw with HM saw blade (D=735 mm, s=6.0 mm)
* Universal Milling Unit with cylindrical cutterhead (D=350 mm, B=120 mm)
* Vertical Combo Support
* Horizontal Combo Support
* Rafter Nail Drilling Unit
* Slotting / Mortising Unit
* Infeed & Outflow Conveyors / Positioning Trolleys
Machine Height: 2550 mm
Machine Length: 12000 mm
Machine Weight: 13000 kg
Machine Width: 2400 mm
Number of Axes: 4
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Model: HUNDEGGER K2-A (manufactured 2000)
Overview:
This listing describes a 4-axis HUNDEGGER K2-A joinery machine configured as a fully automatic CNC joinery/wood machining center. The specification set below covers workpiece capacities, electrical and utility requirements, transport and machine dimensions, and included machining components and units as listed in the provided description.
Key machining capacities and axis information:
- Machine Type: Fully Automatic Joinery Machine
- Number of Axes: 4
- Workpiece cross-section (min): 20 x 50 mm
- Workpiece cross-section (max): 300 x 450 mm
- Minimum workpiece length (automatic mode): 0.3 m (300 mm)
Electrical, pneumatic and hydraulic requirements:
- Operating voltage: 400 / 230 V (3/N/PE)
- Electrical frequency: 50 Hz
- Fusing protection: 3 x 63 A
- Peak power requirement: 15 kW
- Operating compressed air pressure: 8.5 bar (maximum 10 bar)
- Compressed air flow requirement: > 600 l/min
- Hydraulic operating pressure: 100 bar
- Noise emission level (LpA): 79 dB(A) ± 3 dB(A)
Dimensions and weight:
- Transport dimensions (L x W x H): 12.00 m x 2.40 m x 2.55 m
- Machine length: 12000 mm
- Machine width: 2400 mm
- Machine height: 2550 mm
- Machine weight: 13000 kg
Included / equipping components (as listed):
- Under-table swivel cut-off saw with HM saw blade (D = 735 mm, s = 6.0 mm)
- Universal milling unit with cylindrical cutterhead (D = 350 mm, B = 120 mm)
- Vertical combo support
- Horizontal combo support
- Rafter nail drilling unit
- Slotting / mortising unit
- Infeed and outflow conveyors / positioning trolleys
Notes:
- The information above is taken from the provided product description. No additional condition, testing, service history or operational status is specified in the available description; such information should be requested or verified prior to purchase.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2049 |
| Last activity | Nov. 7, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
CNC дървообработващ център HUNDEGGER K2-A
CNC obráběcí centrum na dřevo HUNDEGGER K2-A
HUNDEGGER K2-A CNC-træbearbejdningscenter
HUNDEGGER K2-A CNC-Holzbearbeitungszentrum
Κέντρο κατεργασίας CNC ξύλου HUNDEGGER K2-A
HUNDEGGER K2-A Wood CNC machining center
Centro de mecanizado CNC para madera HUNDEGGER K2-A
Centre d’usinage CNC bois HUNDEGGER K2-A
CNC obradno središte za drvo HUNDEGGER K2-A
HUNDEGGER K2-A CNC faipari megmunkálóközpont
Centro di lavoro CNC per legno HUNDEGGER K2-A
HUNDEGGER K2-A CNC medienos apdirbimo centras
HUNDEGGER K2-A CNC-houtbewerkingscentrum
CNC centrum obróbcze do drewna HUNDEGGER K2-A
Centro de usinagem CNC para madeira HUNDEGGER K2-A
Centru de prelucrare CNC pentru lemn HUNDEGGER K2-A
HUNDEGGER K2-A Деревообрабатывающий обрабатывающий центр с ЧПУ
CNC obradni centar za drvo HUNDEGGER K2-A
HUNDEGGER K2-A CNC-träbearbetningscenter
CNC ahşap işleme merkezi HUNDEGGER K2-A
EN
- Languages
English (GB)