| Category | Miscellaneous broadcast equipment, film & audio |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | visible |
| Last availability date | 22/12/2025 |
| Product id | P2403111922 |
| Language |
This listing features a Hughes HX HUB, a high-capacity satellite communication hub suitable for use with any High Throughput Satellite (HTS). The HUB supports up to 7 simultaneous outbound transmissions and is capable of handling data capacities exceeding 1 Gbps. It includes multiple components such as IP/SAT Gateways, Timing Generator, Screens, DNCC units, NMSS, TPS, CDS units (including spares), Switches, and Power Distribution units. The equipment is rack-mounted with multiple network devices and servers, each showing operational indicator lights in green and blue, with some amber lights present. There is no visible physical damage to the equipment or rack structure. The rack features numbered rail positions from 1 to 23 and has numerous cables connected, although the cables appear densely packed and somewhat tangled but without visible damage to connectors or cables. The seller also offers spares for both HUB types (HX and HN) and includes two CDS units as spares with the sale. Additionally, the supplier will provide two hours of initial setup support for a fee of $500 if required. Hughes UK has confirmed there are no issues transferring ownership, and ongoing support can be obtained through Hughes US. All cables will be tidied, and blanking plates will be placed over spare rack slots prior to delivery. Potential buyers should inquire if a downconverter is needed, especially if the Earth station operates at L-band rather than IF; a Newtec downconverter is available for $3000. The HUB is accompanied by approximately 150 remote terminals, each valued at over $500 new. This equipment offers a cost-effective solution compared to the original equipment cost, which exceeded USD 500,000.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Supplier has two different types of HUBs, the HX and the HN.
The specs below for the Hughes HX HUB
IP/SAT Gateway 1
IP/SAT Gateway 2
Timing Generator
Screen
DNCC1
DNCC2
NMSS
TPS1
CDS1
CDS2
SWITCH
CDS SPARE 1
CDS SPARE 2
POWER DISTRIBUTION 1
POWER DISTRIBUTION 2
Also has spares for both of these hubs.
Points I would like to highlight below..
o BW will supply 2hrs initial setup support, (if required) @ $500
o BW will include 2 x CDS’s as spares
o Hughes UK have confirmed there is no issue transferring ownership and to contact Hughes US for ongoing ECAC support
o All cables will be tidied and blanking plates placed over the spares rack slots
Can you ask them if they would need a downconverter with the HUB? If so we have a NEWTEC one @$3000…They will need this if the Earth station works at L-band and not at IF.?
I will get you a video showing that the HUB is fully operational.
I have this Hughes HX Hub with 7 Transmits (can fire up 7 out bounds) which we are able to let go at very affordable rate. The actual cost of equipment is over USD 500,000.00.
The HUB can be used on any HTS Satellite and can handle capacity of over 1Gbps. We also have remote terminals about 150. The cost of new terminals is over USD 500 each.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2008 |
| Offers online | 23 |
| Last activity | Sept. 18, 2026 |
Supplier has two different types of HUBs, the HX and the HN.
The specs below for the Hughes HX HUB
IP/SAT Gateway 1
IP/SAT Gateway 2
Timing Generator
Screen
DNCC1
DNCC2
NMSS
TPS1
CDS1
CDS2
SWITCH
CDS SPARE 1
CDS SPARE 2
POWER DISTRIBUTION 1
POWER DISTRIBUTION 2
Also has spares for both of these hubs.
Points I would like to highlight below..
o BW will supply 2hrs initial setup support, (if required) @ $500
o BW will include 2 x CDS’s as spares
o Hughes UK have confirmed there is no issue transferring ownership and to contact Hughes US for ongoing ECAC support
o All cables will be tidied and blanking plates placed over the spares rack slots
Can you ask them if they would need a downconverter with the HUB? If so we have a NEWTEC one @$3000…They will need this if the Earth station works at L-band and not at IF.?
I will get you a video showing that the HUB is fully operational.
I have this Hughes HX Hub with 7 Transmits (can fire up 7 out bounds) which we are able to let go at very affordable rate. The actual cost of equipment is over USD 500,000.00.
The HUB can be used on any HTS Satellite and can handle capacity of over 1Gbps. We also have remote terminals about 150. The cost of new terminals is over USD 500 each.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Category | Miscellaneous broadcast equipment, film & audio |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | visible |
| Last availability date | 22/12/2025 |
| Product id | P2403111922 |
| Language |
This listing features a Hughes HX HUB, a high-capacity satellite communication hub suitable for use with any High Throughput Satellite (HTS). The HUB supports up to 7 simultaneous outbound transmissions and is capable of handling data capacities exceeding 1 Gbps. It includes multiple components such as IP/SAT Gateways, Timing Generator, Screens, DNCC units, NMSS, TPS, CDS units (including spares), Switches, and Power Distribution units. The equipment is rack-mounted with multiple network devices and servers, each showing operational indicator lights in green and blue, with some amber lights present. There is no visible physical damage to the equipment or rack structure. The rack features numbered rail positions from 1 to 23 and has numerous cables connected, although the cables appear densely packed and somewhat tangled but without visible damage to connectors or cables. The seller also offers spares for both HUB types (HX and HN) and includes two CDS units as spares with the sale. Additionally, the supplier will provide two hours of initial setup support for a fee of $500 if required. Hughes UK has confirmed there are no issues transferring ownership, and ongoing support can be obtained through Hughes US. All cables will be tidied, and blanking plates will be placed over spare rack slots prior to delivery. Potential buyers should inquire if a downconverter is needed, especially if the Earth station operates at L-band rather than IF; a Newtec downconverter is available for $3000. The HUB is accompanied by approximately 150 remote terminals, each valued at over $500 new. This equipment offers a cost-effective solution compared to the original equipment cost, which exceeded USD 500,000.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2008 |
| Offers online | 23 |
| Last activity | Sept. 18, 2026 |