Showing 1 - 20 out of 24
Year: 2009
Table cutting plotter with the following equipment: - 2 Z-axes for 2 tools (one for knives and one for milling motor, currently no milling motor installed but only knives) - Oscillating knife, pneumatically driven - Vacuum table with automatic field control - 2 adjustable vacuum pumps - All axes with servo drive - Auto-nesting software module - Interactive layout software …Year: 2016
Machine manufacturer: ROLL O MATIC Machine model: DELTA 1100 Year of manufacturing: 2016 Materials: HDPE – LDPE - BIO Condition: in production Working hours: 812 Hours Complete line: YES Machine dimension: (length 17.5m /width 3.5m /height (2.5m to 3.3m) Welding width: 900 (3 X 300) Plastic type bag: T-shirt bag / bottom seal bag Final positioning of the bags: roll …Year: 2023
The machine was built in 2023 Only medical EVA was used. Production was made for trial purposes and the machine did not get tired. Can absorb EVA, PE, and many soft materials.Year: 2014
Screw diameter | 156 mm |
---|---|
Type | Single screw |
Output | 300 kg/h |
---|
Year: 2021
Screw diameter | 65 mm |
---|---|
Output | 250 kg/h |
Plastifying capacity | 200 kg/h |
---|
Year: 2008
Maszyna Maklaus model Res-Uni SPECIFICATIONS: Max. rewinding speed 1500 meters per minute Cycle production time 17-21 seconds (for 250 meter rolls) Max. diameter of mother roll 550 mm Max. material width 600 mm Min. material width 450 mm Max. diameter of finished roll 300 mm Mother roll core diameter 76 mm Inside diameter of finished roll 50 mm (30mm, 32mm, …Year: 2017
BWU 1100 (2015) BWU 1100(2017) Max air pressure: 600 kPa Euroline – optimized for in- or off-line garbage bag production • Basic converting line for garbage bag production including a non driven C-folder • In- or Offline configuration – with or without surface unwind • Flexible unit, easy to operate and maintain • Servo driven • A combination of well …Year: 2018
I would like to offer the UHG 500 Easy vacuum chamber. It was purchased in 2018 at a price of €24,980, has been in operation for a total of 510 hours and is in very good condition. In addition to two Memmert ovens (see attachment), the vacuum chamber also includes a handling table with a load capacity of 1,000 kg, …Year: 1989
Clamping force | 135 T |
---|---|
Mould size |
Robot interface |
---|
Year: 2016
Recycled material |
---|
Year: 2017
Clamping force | 25 T |
---|---|
Shot volume | 34 cm³ |
Robot interface |
Screw diameter | 22 mm |
---|---|
Pressure on material | 2000 bar |
Mould size |
Year: 2020
Clamping force | 25 T |
---|---|
Shot volume | 34 cm³ |
Robot interface |
Screw diameter | 22 mm |
---|---|
Pressure on material | 2000 bar |
Mould size |
Year: 1995
Clamping force | 50 T |
---|---|
Tie bar spacing (H) | 335 mm |
Shot volume | 96 cm³ |
Screw diameter | 32 mm |
---|---|
Tie bar spacing (V) | 305 mm |
Pressure on material | 1890 bar |
Year: 2002
Clamping force | 80 T |
---|---|
Tie bar spacing (H) | 405 mm |
Shot volume | 85 cm³ |
Screw diameter | 35 mm |
---|---|
Tie bar spacing (V) | 405 mm |
Shot weight | 116 g |
Year: 1988
Elwa bag machine +Dietrich electronik perforator , max. whidth sealing 1250mm , min. 300mm . Thickness from 2x0,02 -0.2 . Speed 110cycles/minute when was new . Needles collection for the bags.Year: 2010
China Q1500 extrusion line I sell a line for the production of double layer babel film 1500 cm I offer a 100% working, currently operating line for the production of two-layer film 1500cm. line is currently working, is fully operational, the line of 2010, including estruder, winder, chiller, control cabinet, full operating instructionsYear: 2010
Clamping force | 120 T |
---|---|
Mould size |
Robot interface |
---|
Year: 2001
Clamping force | 110 T |
---|---|
Shot volume | 154 cm³ |
Mould size |
Screw diameter | 35 mm |
---|---|
Robot interface |