Homag Kal 210/7/A20/S2 Edgebander
| Manufacturer | Homag |
|---|---|
| Model | Kal 210/7/A20/S2 |
| Year | |
| Location | Canada
|
HOMAG KAL 210/7/A20/S2 … Edgebander with Pre-Milling & Corner Rounding (4) Motor:
Working Capacity:
Edge thickness, coiled stock min/max, 0.3 – 3 mm (0.012. – 0.112″), straight edges, min/max. 0.4 – 20 mm (0.016 – 0.788″), panel thickness min/max. 12 – 60 mm
(0.472 – 2.362″).
Equipped with:
• Pre-Milling Station: Two vertical jointing spindles, KW 3.0 x 2 (HP 4.0 x 2) – 150 Hz, 9,000 RPM Motors; equipped with panel blow off device and SIKO digital counters for adjustments.
• Panel Pre-Heat Unit: Quartz lamp for heating substrate edge before glue application.
• Edge Magazine Combination: Strip processing and (2) – coil vertical magazine for quick coil changeover.
• Gluing System A 20: EVA (Hot Melt), Quick Melt hopper feeder & roller applicator (reversible).
• Pressure Section “C”: Servo controlled with (1) Large 150 mm dia. driven & (6) idle rollers; automatic servo adjusting pressure zone through program for varying edge thicknesses.Workstations:
• End Trimming Unit HL 84: KW 0.8 x 2 (HP 1.0 x 2) – 200 Hz, 12,000 RPM Motor ea. to cut excess edge on the front & back of the panel; pneumatic adjusting from chamfer to straight snip.
• Rough/Pre-Trimming Unit: Top & bottom, KW 1.5 x 2 (HP 2.0 x 2) – 12,000 RPM ea. motor. Height adjustment with the top pressure-beam and swiveling range +/- 1°.
• Profile Trimming / Corner Rounding “FF 12” Unit: Equipped with (4) motors for fine or profile trimming upper and lower edge, as well as trimming around the front & rear edge. KW 0.4 x 4 (HP 0.54 x 4) motor ea.
• .2.2 Kw (3.0 HP) Grooving Unit, 90 deg. horizontal/vertical with jump control
• Profile Scraping Unit PN 10: Top & bottom for thick PVC/ABS, pneumatically activated
• Flat Glue Scraper Unit: Top & bottom to remove potential glue squeeze-out.
• Buffing Unit: Top & bottom edge polishing.Complete With:
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Consultant / Intermediary |
| Active since | 2021 |
| Offers online | 0 |
| Last activity | Nov. 3, 2025 |
HOMAG KAL 210/7/A20/S2 … Edgebander with Pre-Milling & Corner Rounding (4) Motor:
Working Capacity:
Edge thickness, coiled stock min/max, 0.3 – 3 mm (0.012. – 0.112″), straight edges, min/max. 0.4 – 20 mm (0.016 – 0.788″), panel thickness min/max. 12 – 60 mm
(0.472 – 2.362″).
Equipped with:
• Pre-Milling Station: Two vertical jointing spindles, KW 3.0 x 2 (HP 4.0 x 2) – 150 Hz, 9,000 RPM Motors; equipped with panel blow off device and SIKO digital counters for adjustments.
• Panel Pre-Heat Unit: Quartz lamp for heating substrate edge before glue application.
• Edge Magazine Combination: Strip processing and (2) – coil vertical magazine for quick coil changeover.
• Gluing System A 20: EVA (Hot Melt), Quick Melt hopper feeder & roller applicator (reversible).
• Pressure Section “C”: Servo controlled with (1) Large 150 mm dia. driven & (6) idle rollers; automatic servo adjusting pressure zone through program for varying edge thicknesses.Workstations:
• End Trimming Unit HL 84: KW 0.8 x 2 (HP 1.0 x 2) – 200 Hz, 12,000 RPM Motor ea. to cut excess edge on the front & back of the panel; pneumatic adjusting from chamfer to straight snip.
• Rough/Pre-Trimming Unit: Top & bottom, KW 1.5 x 2 (HP 2.0 x 2) – 12,000 RPM ea. motor. Height adjustment with the top pressure-beam and swiveling range +/- 1°.
• Profile Trimming / Corner Rounding “FF 12” Unit: Equipped with (4) motors for fine or profile trimming upper and lower edge, as well as trimming around the front & rear edge. KW 0.4 x 4 (HP 0.54 x 4) motor ea.
• .2.2 Kw (3.0 HP) Grooving Unit, 90 deg. horizontal/vertical with jump control
• Profile Scraping Unit PN 10: Top & bottom for thick PVC/ABS, pneumatically activated
• Flat Glue Scraper Unit: Top & bottom to remove potential glue squeeze-out.
• Buffing Unit: Top & bottom edge polishing.Complete With:
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Consultant / Intermediary |
| Active since | 2021 |
| Offers online | 0 |
| Last activity | Nov. 3, 2025 |
двустранен кант Homag Kal 210/7/A20/S2
Dýhovačka - oboustranná Homag Kal 210/7/A20/S2
Homag Kal 210/7/A20/S2 dobbeltsidet kantbånd
Homag Kal 210/7/A20/S2 Gebrauchte doppelseitige Kantenanleimmaschine
διπλής όψης πλευρικό πλέγμα Homag Kal 210/7/A20/S2
Homag Kal 210/7/A20/S2 Edgebander
Canteadora bilateral Homag Kal 210/7/A20/S2
Plaqueuse de chants bilatérale Homag Kal 210/7/A20/S2
dvostrana rubna traka Homag Kal 210/7/A20/S2
Homag Kal 210/7/A20/S2 kétoldalas élszalag
Bordatrice bilaterale Homag Kal 210/7/A20/S2
dvipusė kraštinė juosta Homag Kal 210/7/A20/S2
Homag Kal 210/7/A20/S2 dubbelzijdige kantenaanlijmer
Używana okleiniarka dwustronna Homag Kal 210/7/A20/S2
bordadeira dupla face Homag Kal 210/7/A20/S2
placare de canturi cu două fețe Homag Kal 210/7/A20/S2
Homag Kal 210/7/A20/S2 Кромкооблицовочный станок - Двусторонний
dvostrani ivični trak Homag Kal 210/7/A20/S2
Homag Kal 210/7/A20/S2 dubbelsidig kantband
İkinci el çift yönlü kenar bantlama makinası Homag Kal 210/7/A20/S2
EN
- Languages
English (GB)