| Manufacturer | HELLER |
|---|---|
| Model | MCH-300 |
| Year | 2002 |
| Location | Germany
|
This listing features a HELLER MCH-300 horizontal machining center manufactured in 2002, designed for mechanical processing of cylinder heads and cylinder crankcases. The machine is controlled via a Siemens CNC system, offering precise and automated machining capabilities. It has a substantial working envelope with X-axis travel of 1000 mm, Y-axis travel of 800 mm, and Z-axis travel of 1100 mm, accommodating a pallet size of 630 x 800 mm. The tool holder supports SK50 and alternatively HSK-A 100, with a spindle speed range from 45 to 6,000 rpm, suitable for a variety of machining tasks.
The machine requires a floor space of approximately 6.80 m in length, 3.0 m in width, and 3.20 m in height, and weighs around 20,000 kg. The pallet change time is approximately 21 seconds, enhancing operational efficiency. The machine has been used in single-shift operation since 2013, with adherence to service and maintenance intervals reported.
The exterior of the machine features white and blue panels with a yellow door providing access to the machining area. The control panel is located on the right side and is currently covered in protective plastic. The machine shows signs of wear and dirt consistent with regular use but no visible major damage. Some panels are open, exposing internal hydraulic and electrical components, indicating that the machine may be undergoing maintenance. The machining area and surrounding panels exhibit heavy use with visible dirt and grime. Safety tape is present around the machine, possibly indicating restricted access during maintenance. Multiple cables and pipes are visible underneath the base, and an orange tool cart is positioned nearby. The floor beneath the machine shows some oil or fluid stains. These observations suggest the machine has been actively maintained but may require further inspection before use.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Machine type: Machining center - Horizontal
Make: HELLER
Type: MCH-300
Year of construction: 2002
Control type: CNC
Control name: Siemens
x-path: 1000 mm
y-travel: 800 mm
z-path: 1100 mm
Total power requirement: kW
Machine weight: approx. 20 t
Space requirement: approx. 6.80 x 3.0 x 3.20 m
Tool holder: SK50
Alternative tool holder: HSK-A 100
Speed range: 45-6,000 rpm
Pallet size: 630 x 800 mm
Pallet change time: 21 sec
Area of application: Mechanical processing of cylinder heads and cylinder crankcases
Operating condition: Machines have been in single-shift operation since 2013, service and maintenance intervals have been adhered to
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2014 |
| Offers online | 119 |
| Last activity | Oct. 29, 2026 |
Machine type: Machining center - Horizontal
Make: HELLER
Type: MCH-300
Year of construction: 2002
Control type: CNC
Control name: Siemens
x-path: 1000 mm
y-travel: 800 mm
z-path: 1100 mm
Total power requirement: kW
Machine weight: approx. 20 t
Space requirement: approx. 6.80 x 3.0 x 3.20 m
Tool holder: SK50
Alternative tool holder: HSK-A 100
Speed range: 45-6,000 rpm
Pallet size: 630 x 800 mm
Pallet change time: 21 sec
Area of application: Mechanical processing of cylinder heads and cylinder crankcases
Operating condition: Machines have been in single-shift operation since 2013, service and maintenance intervals have been adhered to
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
This listing features a HELLER MCH-300 horizontal machining center manufactured in 2002, designed for mechanical processing of cylinder heads and cylinder crankcases. The machine is controlled via a Siemens CNC system, offering precise and automated machining capabilities. It has a substantial working envelope with X-axis travel of 1000 mm, Y-axis travel of 800 mm, and Z-axis travel of 1100 mm, accommodating a pallet size of 630 x 800 mm. The tool holder supports SK50 and alternatively HSK-A 100, with a spindle speed range from 45 to 6,000 rpm, suitable for a variety of machining tasks.
The machine requires a floor space of approximately 6.80 m in length, 3.0 m in width, and 3.20 m in height, and weighs around 20,000 kg. The pallet change time is approximately 21 seconds, enhancing operational efficiency. The machine has been used in single-shift operation since 2013, with adherence to service and maintenance intervals reported.
The exterior of the machine features white and blue panels with a yellow door providing access to the machining area. The control panel is located on the right side and is currently covered in protective plastic. The machine shows signs of wear and dirt consistent with regular use but no visible major damage. Some panels are open, exposing internal hydraulic and electrical components, indicating that the machine may be undergoing maintenance. The machining area and surrounding panels exhibit heavy use with visible dirt and grime. Safety tape is present around the machine, possibly indicating restricted access during maintenance. Multiple cables and pipes are visible underneath the base, and an orange tool cart is positioned nearby. The floor beneath the machine shows some oil or fluid stains. These observations suggest the machine has been actively maintained but may require further inspection before use.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2014 |
| Offers online | 119 |
| Last activity | Oct. 29, 2026 |
Хоризонтален обработващ център HELLER MCH-300
Horizontální obráběcí centrum HELLER MCH-300
HELLER MCH-300 Vandret bearbejdningscenter
HELLER MCH-300 Horizontales Bearbeitungszentrum
Οριζόντιο κέντρο κατεργασίας HELLER MCH-300
HELLER MCH-300 Horizontal machining center
Centro de mecanizado horizontal HELLER MCH-300
Centre d'usinage horizontal HELLER MCH-300
Horizontalni obradni centar HELLER MCH-300
HELLER MCH-300 Vízszintes megmunkáló központ
Centro di lavoro orizzontale HELLER MCH-300
Horizontalus apdirbimo centras HELLER MCH-300
HELLER MCH-300 Horizontaal bewerkingscentrum
Centrum obróbcze poziome HELLER MCH-300
Centro de maquinação horizontal HELLER MCH-300
Centru de prelucrare orizontal HELLER MCH-300
HELLER MCH-300 Горизонтальный обрабатывающий центр
Horizontalni obradni centar HELLER MCH-300
HELLER MCH-300 Horisontellt bearbetningscenter
Yatay işleme merkezi HELLER MCH-300
EN
- Languages
English (GB)