Contact us to receive an offer.
| Category | Milling - Miscellaneous milling machines |
| X axis | 1120 mm |
| Y axis | 345 mm |
| Z axis | 400 mm |
| CNC | Yes |
| CNC type | EFE 700 |
| Table length | 400 mm |
| Table width | 1600 mm |
| Table area (mm x mm) | |
| Max load on table | 1500 kg |
| Spindle taper | |
| Max. spindle speed | 1400 rpm |
| Spindle motor power | 14.5 kW |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | Heckert FU400E |
| Last availability date | 10/11/2026 |
| Product id | P251114126 |
| Language |
This listing offers a used Heckert FU400E horizontal console milling machine, designed for versatile machining tasks. The machine features a robust worktable measuring 400 mm by 1600 mm, equipped with T-slots for secure mounting of workpieces or fixtures. The table allows for mechanical travel of 1120 mm along the X axis, 345 mm along the Y axis, and 400 mm along the Z axis, facilitating precise machining operations. The maximum load capacity on the table is 1500 kg, accommodating heavy workpieces including clamping devices when symmetrically balanced.
The milling spindle is powered by a 14.5 kW motor and offers a speed range from 28 to 1400 rpm, with a maximum torque of 1850 Nm at the front bearing. The machine supports rapid traverse speeds of up to 3150 mm/min in the X and Y directions and 1000 mm/min in the Z direction. Feed rates vary between 16 and 800 mm/min for the X and Y axes and between 5 and 250 mm/min for the Z axis. The table can swivel 45 degrees to each side, enhancing flexibility for angular machining.
Control is managed via an EFE 700 SPS system, with a control panel featuring labeled buttons for X, Y, and Z axes and various milling functions. The control panel, attached to the side of the machine, includes multiple knobs and levers for operation. An attached lamp provides illumination to the work area.
The machine shows signs of wear, dirt, and some rust consistent with industrial use, reflecting its used condition. Hydraulic or coolant hoses are visible underneath the machine, indicating support for coolant or hydraulic functions. Overall, this Heckert FU400E milling machine is a substantial piece of equipment suitable for machining tasks requiring a horizontal worktable and precise control.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Machine offered: Used horizontal console milling machine
Manufacturer: Heckert Werkzeugmaschinen
Type: FU400E
Year of construction: 1989
Technical data
Connected voltage: 380 V
Connected load: 14.5 kW
Control: EFE 700 (SPS)
Size of the clamping table: 400 x 1600 mm
Path of the mechanical movement of the clamping table:
- x-direction: 1120 mm
- y-direction: 345 mm
- z-direction: 400 mm
Path of the manual movement of the clamping table:
- x-direction: 1150 mm
- y-direction: 370 mm
- z-direction: 430 mm
Swivel range of the table to each side: 45 º
Diameter at the front bearing of the milling spindle: 110 mm
Max. Torque on the milling spindle: 1850 Nm
Max. Workpiece mass including clamping devices (with approximately symmetrical clamping): 1500 kg
Rapid traverse:
- in x- and y-direction: 3150 mm/min
- in z-direction: 1000 mm/min
Speed range: 28 - 1400 rpm
Feed rates:
- in x- and y-direction: 16 - 800 mm/min
- in z-direction: 5 - 250 mm/min
Condition: as inspected, where inspected
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2021 |
| Offers online | 21 |
| Last activity | Nov. 16, 2026 |
Machine offered: Used horizontal console milling machine
Manufacturer: Heckert Werkzeugmaschinen
Type: FU400E
Year of construction: 1989
Technical data
Connected voltage: 380 V
Connected load: 14.5 kW
Control: EFE 700 (SPS)
Size of the clamping table: 400 x 1600 mm
Path of the mechanical movement of the clamping table:
- x-direction: 1120 mm
- y-direction: 345 mm
- z-direction: 400 mm
Path of the manual movement of the clamping table:
- x-direction: 1150 mm
- y-direction: 370 mm
- z-direction: 430 mm
Swivel range of the table to each side: 45 º
Diameter at the front bearing of the milling spindle: 110 mm
Max. Torque on the milling spindle: 1850 Nm
Max. Workpiece mass including clamping devices (with approximately symmetrical clamping): 1500 kg
Rapid traverse:
- in x- and y-direction: 3150 mm/min
- in z-direction: 1000 mm/min
Speed range: 28 - 1400 rpm
Feed rates:
- in x- and y-direction: 16 - 800 mm/min
- in z-direction: 5 - 250 mm/min
Condition: as inspected, where inspected
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Category | Milling - Miscellaneous milling machines |
| X axis | 1120 mm |
| Y axis | 345 mm |
| Z axis | 400 mm |
| CNC | Yes |
| CNC type | EFE 700 |
| Table length | 400 mm |
| Table width | 1600 mm |
| Table area (mm x mm) | |
| Max load on table | 1500 kg |
| Spindle taper | |
| Max. spindle speed | 1400 rpm |
| Spindle motor power | 14.5 kW |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | Heckert FU400E |
| Last availability date | 10/11/2026 |
| Product id | P251114126 |
| Language |
This listing offers a used Heckert FU400E horizontal console milling machine, designed for versatile machining tasks. The machine features a robust worktable measuring 400 mm by 1600 mm, equipped with T-slots for secure mounting of workpieces or fixtures. The table allows for mechanical travel of 1120 mm along the X axis, 345 mm along the Y axis, and 400 mm along the Z axis, facilitating precise machining operations. The maximum load capacity on the table is 1500 kg, accommodating heavy workpieces including clamping devices when symmetrically balanced.
The milling spindle is powered by a 14.5 kW motor and offers a speed range from 28 to 1400 rpm, with a maximum torque of 1850 Nm at the front bearing. The machine supports rapid traverse speeds of up to 3150 mm/min in the X and Y directions and 1000 mm/min in the Z direction. Feed rates vary between 16 and 800 mm/min for the X and Y axes and between 5 and 250 mm/min for the Z axis. The table can swivel 45 degrees to each side, enhancing flexibility for angular machining.
Control is managed via an EFE 700 SPS system, with a control panel featuring labeled buttons for X, Y, and Z axes and various milling functions. The control panel, attached to the side of the machine, includes multiple knobs and levers for operation. An attached lamp provides illumination to the work area.
The machine shows signs of wear, dirt, and some rust consistent with industrial use, reflecting its used condition. Hydraulic or coolant hoses are visible underneath the machine, indicating support for coolant or hydraulic functions. Overall, this Heckert FU400E milling machine is a substantial piece of equipment suitable for machining tasks requiring a horizontal worktable and precise control.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2021 |
| Offers online | 21 |
| Last activity | Nov. 16, 2026 |