Contact us to receive an offer.
| Manufacturer | Hardinge |
|---|---|
| Model | GX1000 |
| Year | 2010 |
| Location | United Kingdom
|
This Hardinge GX1000 vertical machining center, manufactured in 2010, is equipped with a Heidenhain iTNC 530 control system. The machine has a footprint measuring 2955 mm in length, 2137 mm in width, and 2713 mm in height, with a total weight of approximately 5900 kg. It features a worktable sized 1120 mm by 540 mm, including three T-slots of 18 mm each, suitable for securing fixtures and clamps, which are currently attached to the table.
The machine offers travel ranges of 1020 mm on the X-axis, 540 mm on the Y-axis, and 540 mm on the Z-axis, with a minimum to maximum spindle height clearance ranging from 145 mm to 685 mm. It supports a maximum workpiece weight of 800 kg and can accommodate tools up to 80 mm in diameter, or 150 mm with empty adjacent pockets, with a maximum tool length of 300 mm and tool weight up to 8 kg.
The spindle motor delivers 15 kW of power and operates at speeds up to 10,000 rpm. Rapid feedrates reach up to 36 meters per minute. The tool changer has a capacity of 24 stations, using BT40 tool holders, and achieves a chip-to-chip tool change time of approximately 4.5 seconds.
The machine's exterior shows signs of usage with some dirt and wear marks visible on the surfaces. The control panel is mounted on the right side of the machine and features a screen and keypad; the screen is sometimes powered on displaying coordinates and machine status. The spindle area inside the machine is visible and includes warning labels. Accessories observed include a yellow bucket positioned near the machine base, likely for coolant or cleaning purposes, and a nearby table holding various tools and accessories.
Overall, this Hardinge GX1000 machining center is a robust and capable vertical machining solution, suitable for a variety of precision milling tasks, with comprehensive tool handling and workpiece capacity.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Control
Heidenhain iTNC 530
Machine Dimensions
2955 x 2137 x 2713mm
Machine Weight
5900kg
Maximum Tool Diameter
80mm
Maximum Tool Diameter with Empty Adjacent Pockets
150mm
Maximum Tool Length
300mm
Maximum Tool Weight
8kg
Maximum workpiece weight
800kg
Min - Max Height under Spindle
145 - 685mm
Rapid Feedrates
36m/minute
Spindle Motor Power
15kW
Spindle Speed
10000rpm
T- Slots
3 x 18mm
Table Size
1120 x 540mm
Tool Change Capacity
24 Station
Tool Change Time (Chip to Chip)
4.5 seconds
Tool Size
BT40
Traverses XYZ
1020 x 540 x 540mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2009 |
| Offers online | 174 |
| Last activity | Nov. 2, 2026 |
Control
Heidenhain iTNC 530
Machine Dimensions
2955 x 2137 x 2713mm
Machine Weight
5900kg
Maximum Tool Diameter
80mm
Maximum Tool Diameter with Empty Adjacent Pockets
150mm
Maximum Tool Length
300mm
Maximum Tool Weight
8kg
Maximum workpiece weight
800kg
Min - Max Height under Spindle
145 - 685mm
Rapid Feedrates
36m/minute
Spindle Motor Power
15kW
Spindle Speed
10000rpm
T- Slots
3 x 18mm
Table Size
1120 x 540mm
Tool Change Capacity
24 Station
Tool Change Time (Chip to Chip)
4.5 seconds
Tool Size
BT40
Traverses XYZ
1020 x 540 x 540mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
This Hardinge GX1000 vertical machining center, manufactured in 2010, is equipped with a Heidenhain iTNC 530 control system. The machine has a footprint measuring 2955 mm in length, 2137 mm in width, and 2713 mm in height, with a total weight of approximately 5900 kg. It features a worktable sized 1120 mm by 540 mm, including three T-slots of 18 mm each, suitable for securing fixtures and clamps, which are currently attached to the table.
The machine offers travel ranges of 1020 mm on the X-axis, 540 mm on the Y-axis, and 540 mm on the Z-axis, with a minimum to maximum spindle height clearance ranging from 145 mm to 685 mm. It supports a maximum workpiece weight of 800 kg and can accommodate tools up to 80 mm in diameter, or 150 mm with empty adjacent pockets, with a maximum tool length of 300 mm and tool weight up to 8 kg.
The spindle motor delivers 15 kW of power and operates at speeds up to 10,000 rpm. Rapid feedrates reach up to 36 meters per minute. The tool changer has a capacity of 24 stations, using BT40 tool holders, and achieves a chip-to-chip tool change time of approximately 4.5 seconds.
The machine's exterior shows signs of usage with some dirt and wear marks visible on the surfaces. The control panel is mounted on the right side of the machine and features a screen and keypad; the screen is sometimes powered on displaying coordinates and machine status. The spindle area inside the machine is visible and includes warning labels. Accessories observed include a yellow bucket positioned near the machine base, likely for coolant or cleaning purposes, and a nearby table holding various tools and accessories.
Overall, this Hardinge GX1000 machining center is a robust and capable vertical machining solution, suitable for a variety of precision milling tasks, with comprehensive tool handling and workpiece capacity.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2009 |
| Offers online | 174 |
| Last activity | Nov. 2, 2026 |
Вертикален обработващ център Hardinge GX1000
Vertikální obráběcí centrum Hardinge GX1000
Hardinge GX1000 Lodret bearbejdningscenter
Hardinge GX1000 Vertikales Bearbeitungszentrum
Κάθετο κέντρο κατεργασίας Hardinge GX1000
Hardinge GX1000 Vertical machining center
Centro de mecanizado vertical Hardinge GX1000
Centre d'usinage vertical Hardinge GX1000
Vertikalni obradni centar Hardinge GX1000
Hardinge GX1000 Függőleges megmunkáló központ
Centro di lavoro verticale Hardinge GX1000
Vertikalus apdirbimo centras Hardinge GX1000
Hardinge GX1000 Verticaal bewerkingscentrum
Pionowe centrum obróbcze Hardinge GX1000
Centro de maquinação vertical Hardinge GX1000
Centru de prelucrare vertical Hardinge GX1000
Hardinge GX1000 Вертикальный обрабатывающий центр
Vertikalni obradni centar Hardinge GX1000
Hardinge GX1000 Vertikalt bearbetningscenter
Dikey işleme merkezi Hardinge GX1000
EN
- Languages
English (GB)