| Manufacturer | Hangcha |
|---|---|
| Model | XC20Ci-2 (CPD20-XCXY2-SI) |
| Year | 2026 |
| Location | France
|
Hangcha XC20Ci-2 (CPD20-XCXY2-SI) — Electric 2,000 kg capacity forklift, year 2026. This unit is equipped with a Triplex mast and 1,150 mm forks. Manufacturer/model and capacity: Hangcha XC20Ci-2 (CPD20-XCXY2-SI), lifting capacity 2,000 kg. Powertrain: electric. Dimensions and weight: length 3,076 mm, width 1,138 mm, overall height 2,195 mm; machine weight 3,240 kg.
Operator environment and controls: open operator compartment with a seat, steering wheel and overhead guard. The machine includes a carriage and forks; the mast assembly incorporates mast rails, chains and hydraulic lifting components. Exterior and running gear: green body panels on the rear and sides and large, rugged tyres; tyres specified as full soft non-marking in the equipment notes.
Electrical and charging equipment (as noted in the source description): lithium battery with integrated charger and selectable charger configurations available in single-phase or three-phase variants. Drive motor is listed as EMPOWER.
Additional technical details available in the original listing: Triplex mast type, fork length 1,150 mm, and the stated overall dimensions and weight above. No claims are made here about operational condition, testing, or warranty beyond the equipment details provided in the listing. Buyers should refer to the original specification sheet or contact the seller for confirmation of lift heights, battery capacity, charger ratings, service history and any warranty terms before purchase.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Parc New
Reference N17289
Make Hangcha
Model XC20Ci-2 (CPD20-XCXY2-SI)
Year 2026
Power Electric
Lifting capacity 2 000 Kg
Mast type Triplex
Lifting height 4,7 m
Type of tyre Full soft non-marking
Fleet number E029380
Fork length 1 150 mm
Overall height 2 195 mm
Length 3076 mm
Width 1138 mm
Weight 3240 Kg
Overall height lowered mast 2195 mm
Free lift (h2) 1250 mm
Height with mast raised (h4) 5655 mm
Cabin height (h6) 2180 mm
Motor EMPOWER
Charger intégré
Battery Lithium 80V / 230Ah - garantie 5 ans ou 10000hrs
Chargeur 2 cables au choix = Mono 80V / 10Ah ou Triphase 80V / 35Ah
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2004 |
| Offers online | 2130 |
| Last activity | Oct. 25, 2026 |
CAPM Europe is a France-based supplier of new and used material handling equipment, with a strong focus on forklifts and warehouse machinery. With more than 2,000 machines in stock on its website, the company offers a wide selection of equipment for logistics, warehousing, and industrial handling needs. In addition to machine sales, CAPM Europe provides rental services, spare parts, and equipment trade-in solutions. Headquartered in Senlis, the company operates across multiple European markets through a multilingual web presence.
Parc New
Reference N17289
Make Hangcha
Model XC20Ci-2 (CPD20-XCXY2-SI)
Year 2026
Power Electric
Lifting capacity 2 000 Kg
Mast type Triplex
Lifting height 4,7 m
Type of tyre Full soft non-marking
Fleet number E029380
Fork length 1 150 mm
Overall height 2 195 mm
Length 3076 mm
Width 1138 mm
Weight 3240 Kg
Overall height lowered mast 2195 mm
Free lift (h2) 1250 mm
Height with mast raised (h4) 5655 mm
Cabin height (h6) 2180 mm
Motor EMPOWER
Charger intégré
Battery Lithium 80V / 230Ah - garantie 5 ans ou 10000hrs
Chargeur 2 cables au choix = Mono 80V / 10Ah ou Triphase 80V / 35Ah
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Hangcha XC20Ci-2 (CPD20-XCXY2-SI) — Electric 2,000 kg capacity forklift, year 2026. This unit is equipped with a Triplex mast and 1,150 mm forks. Manufacturer/model and capacity: Hangcha XC20Ci-2 (CPD20-XCXY2-SI), lifting capacity 2,000 kg. Powertrain: electric. Dimensions and weight: length 3,076 mm, width 1,138 mm, overall height 2,195 mm; machine weight 3,240 kg.
Operator environment and controls: open operator compartment with a seat, steering wheel and overhead guard. The machine includes a carriage and forks; the mast assembly incorporates mast rails, chains and hydraulic lifting components. Exterior and running gear: green body panels on the rear and sides and large, rugged tyres; tyres specified as full soft non-marking in the equipment notes.
Electrical and charging equipment (as noted in the source description): lithium battery with integrated charger and selectable charger configurations available in single-phase or three-phase variants. Drive motor is listed as EMPOWER.
Additional technical details available in the original listing: Triplex mast type, fork length 1,150 mm, and the stated overall dimensions and weight above. No claims are made here about operational condition, testing, or warranty beyond the equipment details provided in the listing. Buyers should refer to the original specification sheet or contact the seller for confirmation of lift heights, battery capacity, charger ratings, service history and any warranty terms before purchase.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2004 |
| Offers online | 2130 |
| Last activity | Oct. 25, 2026 |
CAPM Europe is a France-based supplier of new and used material handling equipment, with a strong focus on forklifts and warehouse machinery. With more than 2,000 machines in stock on its website, the company offers a wide selection of equipment for logistics, warehousing, and industrial handling needs. In addition to machine sales, CAPM Europe provides rental services, spare parts, and equipment trade-in solutions. Headquartered in Senlis, the company operates across multiple European markets through a multilingual web presence.
Електрически мотокар Hangcha XC20Ci-2 (CPD20-XCXY2-SI)
Elektrický vysokozdvižný vozík Hangcha XC20Ci-2 (CPD20-XCXY2-SI)
Hangcha XC20Ci-2 (CPD20-XCXY2-SI) Elektrisk gaffeltruck
Hangcha XC20Ci-2 (CPD20-XCXY2-SI) Elektrostapler
Ηλεκτρικό περονοφόρο ανυψωτικό Hangcha XC20Ci-2 (CPD20-XCXY2-SI)
Hangcha XC20Ci-2 (CPD20-XCXY2-SI) Electric forklift
Carretilla elevadora eléctrica Hangcha XC20Ci-2 (CPD20-XCXY2-SI)
Chariot élévateur électrique Hangcha XC20Ci-2 (CPD20-XCXY2-SI)
Električni viličar Hangcha XC20Ci-2 (CPD20-XCXY2-SI)
Hangcha XC20Ci-2 (CPD20-XCXY2-SI) Elektromos targonca
Carrello elevatore elettrico Hangcha XC20Ci-2 (CPD20-XCXY2-SI)
Hangcha XC20Ci-2 (CPD20-XCXY2-SI) Elektrinis šakinis krautuvas
Hangcha XC20Ci-2 (CPD20-XCXY2-SI) Elektrische heftruck
Wózek widłowy elektryczny Hangcha XC20Ci-2 (CPD20-XCXY2-SI)
Empilhador elétrico Hangcha XC20Ci-2 (CPD20-XCXY2-SI)
Stivuitor electric Hangcha XC20Ci-2 (CPD20-XCXY2-SI)
Hangcha XC20Ci-2 (CPD20-XCXY2-SI) Электрический погрузчик
Električni viljuškar Hangcha XC20Ci-2 (CPD20-XCXY2-SI)
Hangcha XC20Ci-2 (CPD20-XCXY2-SI) Elektrisk gaffeltruck
Elektrikli forklift Hangcha XC20Ci-2 (CPD20-XCXY2-SI)
EN
- Languages
English (GB)