Contact us to receive an offer.
| Manufacturer | HAITIAN |
|---|---|
| Model | JUPITER 550 III |
| Year | 2021 |
| Location | Spain
|
Machine overview:
This listing is for a HAITIAN JUPITER 550 III thermoplastic injection molding machine, manufactured in 2021. The machine is specified with a clamping force of 563.0 T and a screw diameter of 80.0 mm.
Key features (from the provided information):
- Two-platen style clamping arrangement with short-stroke hydraulic cylinders designed to optimize space and repeatability.
- Injection system with a high injection volume and high injection pressure capability (exact numeric values are provided in the seller’s original specification).
- Generous mold opening stroke and column spacing for accommodating larger molds (see seller specifications for exact dimensions).
- Advanced servo-hydraulic drive (Mars/Jupiter Drive) intended to reduce power consumption compared to traditional fixed-displacement pump systems.
- KEBA industrial controller included, noted for compatibility with Industry 4.0 integration.
- Cartesian robot is included for part handling or automation integration.
Accessories and documentation (as stated):
- Cartesian robot
- Instruction manual
- CE marking
Notes and cautions:
- Numeric values shown in this description are limited to those available in the verified fields (clamping force and screw diameter) and the manufacturing year. Other numeric details referenced in the original specification (such as exact injection volume, injection pressure, mold stroke, column spacing, and operating hours) are not repeated here; please refer to the seller’s full listing or documentation for those exact figures.
- No statements about operational condition, testing, refurbishment, or warranty are made here unless expressly provided by the seller.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
550-metric-ton thermoplastic injection molding machine with an injection capacity of 1,800 cm³, equipped with a robot.
3,000 operating hours.
Clamping force: 5,500 kN (approximately 550 metric tons).
Clamping technology: Two-platen system with four short-stroke hydraulic cylinders to optimize space and repeatability.
Mold opening stroke: Approx. 1,400 mm
Column spacing (H x V): 1,040 x 910 mm.
Screw diameter: 80 mm.
Maximum injection volume: 1,800 cm³
Injection pressure: 1,850 bar.
Advanced servo-hydraulic system (Mars/Jupiter Drive) that significantly reduces power consumption compared to traditional fixed-displacement pumps.
Controller: State-of-the-art KEBA industrial computer designed for integration with Industry 4.0 technologies.
Cartesian robot included
Instruction manual
CE
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2020 |
| Offers online | 18 |
| Last activity | Nov. 6, 2026 |
550-metric-ton thermoplastic injection molding machine with an injection capacity of 1,800 cm³, equipped with a robot.
3,000 operating hours.
Clamping force: 5,500 kN (approximately 550 metric tons).
Clamping technology: Two-platen system with four short-stroke hydraulic cylinders to optimize space and repeatability.
Mold opening stroke: Approx. 1,400 mm
Column spacing (H x V): 1,040 x 910 mm.
Screw diameter: 80 mm.
Maximum injection volume: 1,800 cm³
Injection pressure: 1,850 bar.
Advanced servo-hydraulic system (Mars/Jupiter Drive) that significantly reduces power consumption compared to traditional fixed-displacement pumps.
Controller: State-of-the-art KEBA industrial computer designed for integration with Industry 4.0 technologies.
Cartesian robot included
Instruction manual
CE
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Machine overview:
This listing is for a HAITIAN JUPITER 550 III thermoplastic injection molding machine, manufactured in 2021. The machine is specified with a clamping force of 563.0 T and a screw diameter of 80.0 mm.
Key features (from the provided information):
- Two-platen style clamping arrangement with short-stroke hydraulic cylinders designed to optimize space and repeatability.
- Injection system with a high injection volume and high injection pressure capability (exact numeric values are provided in the seller’s original specification).
- Generous mold opening stroke and column spacing for accommodating larger molds (see seller specifications for exact dimensions).
- Advanced servo-hydraulic drive (Mars/Jupiter Drive) intended to reduce power consumption compared to traditional fixed-displacement pump systems.
- KEBA industrial controller included, noted for compatibility with Industry 4.0 integration.
- Cartesian robot is included for part handling or automation integration.
Accessories and documentation (as stated):
- Cartesian robot
- Instruction manual
- CE marking
Notes and cautions:
- Numeric values shown in this description are limited to those available in the verified fields (clamping force and screw diameter) and the manufacturing year. Other numeric details referenced in the original specification (such as exact injection volume, injection pressure, mold stroke, column spacing, and operating hours) are not repeated here; please refer to the seller’s full listing or documentation for those exact figures.
- No statements about operational condition, testing, refurbishment, or warranty are made here unless expressly provided by the seller.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2020 |
| Offers online | 18 |
| Last activity | Nov. 6, 2026 |
Germany
2007
| Robot interface |
|---|
| Mould size |
|---|
| Clamping force | 250 T |
|---|---|
| Tie bar spacing (H) | 685 mm |
| Shot weight | 679 g |
| Platen length | 1005 mm |
| Bi-metal screw | No |
| Robot interface | |
| Number of heating zones | 6 |
| Mould size | 280-700 |
| Screw diameter | 60 mm |
|---|---|
| Tie bar spacing (V) | 735 mm |
| Pressure on material | 998 bar |
| Platen width | 950 mm |
| Equipped with robot | No |
| Number of cores | 4 |
| Opening of the press | 550 mm |
Croatia
2008
| Clamping force | 800 T |
|---|---|
| Robot interface |
| Screw diameter | 120 mm |
|---|---|
| Mould size |
Bulgaria
2023
| Clamping force | 90 T |
|---|---|
| Tie bar spacing (H) | 360 mm |
| Shot weight | 139 g |
| Opening of the press | 320 mm |
| Screw diameter | 36 mm |
|---|---|
| Tie bar spacing (V) | 360 mm |
| Robot interface | |
| Mould size |
| Clamping force | T |
|---|---|
| Tie bar spacing (H) | 580 mm |
| Shot volume | cm³ |
| Pressure on material | 1850 bar |
| Platen width | 850 mm |
| Equipped with robot | |
| Number of cores | |
| Opening of the press | 540 mm |
| Screw diameter | 55 mm |
|---|---|
| Tie bar spacing (V) | 580 mm |
| Shot weight | 519 g |
| Platen length | 850 mm |
| Bi-metal screw | |
| Robot interface | |
| Number of heating zones | |
| Mould size |
| Clamping force | 470 T |
|---|---|
| Tie bar spacing (H) | 1560 mm |
| Shot weight | 1860 g |
| Platen length | 840 mm |
| Equipped with robot | Yes |
| Mould size | 320/820 |
| Screw diameter | 75 mm |
|---|---|
| Tie bar spacing (V) | 1560 mm |
| Pressure on material | 1850 bar |
| Platen width | 830 mm |
| Robot interface |
Uzbekistan
2016
| Clamping force | 200 T |
|---|---|
| Tie bar spacing (H) | 560 mm |
| Shot volume | 330 cm³ |
| Pressure on material | 180 bar |
| Platen width | 830 mm |
| Equipped with robot | No |
| Opening of the press | 490 mm |
| Screw diameter | 45 mm |
|---|---|
| Tie bar spacing (V) | 560 mm |
| Shot weight | 292 g |
| Platen length | 830 mm |
| Bi-metal screw | Yes |
| Robot interface | нет |
| Mould size | 180-520 |
Uzbekistan
2016
| Clamping force | 120 T |
|---|---|
| Tie bar spacing (H) | 410 mm |
| Shot volume | 214 cm³ |
| Pressure on material | 170 bar |
| Platen width | 600 mm |
| Equipped with robot | No |
| Opening of the press | 360 mm |
| Screw diameter | 40 mm |
|---|---|
| Tie bar spacing (V) | 410 mm |
| Shot weight | 195 g |
| Platen length | 600 mm |
| Bi-metal screw | Yes |
| Robot interface | |
| Mould size | JTMOLD: 400х450х380, 150-430 мм |
Bahrain
2009
| Clamping force | 3300 T |
|---|---|
| Tie bar spacing (H) | 2160 mm |
| Shot volume | 43530 cm³ |
| Pressure on material | 1350 bar |
| Platen width | 3005 mm |
| Equipped with robot | Yes |
| Number of cores | 3 |
| Opening of the press | 3000 mm |
| Screw diameter | 215 mm |
|---|---|
| Tie bar spacing (V) | 1900 mm |
| Shot weight | 39612 g |
| Platen length | 3100 mm |
| Bi-metal screw | Yes |
| Robot interface | Euro Map 12 |
| Number of heating zones | 13 |
| Mould size | 2000 X 1900 X 1900 MM |
| Clamping force | 230 T |
|---|---|
| Tie bar spacing (H) | 620 mm |
| Shot volume | 570 cm³ |
| Number of cores | 0 |
| Mould size |
| Screw diameter | 55 mm |
|---|---|
| Tie bar spacing (V) | 620 mm |
| Robot interface | Euromap 67 |
| Number of heating zones | -2 |
| Clamping force | 1000 T |
|---|---|
| Tie bar spacing (H) | 1270 mm |
| Shot volume | 4847 cm³ |
| Pressure on material | 1892 bar |
| Platen width | 1660 mm |
| Equipped with robot | Yes |
| Number of cores | 4 |
| Opening of the press | 2400 mm |
| Screw diameter | 110 mm |
|---|---|
| Tie bar spacing (V) | 1100 mm |
| Shot weight | 4410 g |
| Platen length | 1700 mm |
| Bi-metal screw | Yes |
| Robot interface | E67 |
| Number of heating zones | 16 |
| Mould size | 500-1200 |
| Clamping force | 1200 T |
|---|---|
| Platen length | 1820 mm |
| Robot interface |
| Screw diameter | 105 mm |
|---|---|
| Platen width | 1820 mm |
| Mould size |
Czech Republic
2015
| Clamping force | 450 T |
|---|---|
| Shot volume | 665 cm³ |
| Robot interface |
| Screw diameter | 55 mm |
|---|---|
| Shot weight | 604 g |
| Mould size |
| Clamping force | 160 T |
|---|---|
| Robot interface |
| Screw diameter | 45 mm |
|---|---|
| Mould size |
| Clamping force | 1300 T |
|---|---|
| Tie bar spacing (V) | 130 mm |
| Robot interface |
| Tie bar spacing (H) | 130 mm |
|---|---|
| Shot volume | 8230 cm³ |
| Mould size |
Czech Republic
2008
| Clamping force | 380 T |
|---|---|
| Tie bar spacing (V) | 730 mm |
| Platen width | 280 mm |
| Mould size |
| Tie bar spacing (H) | 730 mm |
|---|---|
| Platen length | 730 mm |
| Robot interface |
| Clamping force | 1800 T |
|---|---|
| Tie bar spacing (H) | 1650 mm |
| Shot volume | 8350 cm³ |
| Mould size |
| Screw diameter | 130 mm |
|---|---|
| Tie bar spacing (V) | 1550 mm |
| Robot interface | yes |
| Robot interface |
|---|
| Mould size |
|---|
| Clamping force | 360 T |
|---|---|
| Tie bar spacing (H) | 710 mm |
| Shot weight | 913 g |
| Platen length | 1020 mm |
| Robot interface | |
| Opening of the press | 660 mm |
| Screw diameter | 70 mm |
|---|---|
| Tie bar spacing (V) | 710 mm |
| Pressure on material | 1800 bar |
| Platen width | 1020 mm |
| Number of heating zones | 6 |
| Mould size | 250-710 |
Spain
2000
| Clamping force | 80 T |
|---|---|
| Tie bar spacing (H) | 270 mm |
| Shot volume | 124 cm³ |
| Platen length | 310 mm |
| Bi-metal screw | No |
| Robot interface | |
| Mould size | 310 |
| Screw diameter | 26 mm |
|---|---|
| Tie bar spacing (V) | 310 mm |
| Shot weight | 103 g |
| Platen width | 310 mm |
| Equipped with robot | No |
| Opening of the press | 310 mm |
Spain
2003
| Clamping force | 150 T |
|---|---|
| Tie bar spacing (H) | 470 mm |
| Shot volume | 320 cm³ |
| Pressure on material | 1460 bar |
| Platen width | 700 mm |
| Equipped with robot | No |
| Number of heating zones | 4 |
| Mould size | 180-500 |
| Screw diameter | 42 mm |
|---|---|
| Tie bar spacing (V) | 470 mm |
| Shot weight | 195 g |
| Platen length | 700 mm |
| Bi-metal screw | No |
| Robot interface | |
| Opening of the press | 420 mm |
| Clamping force | 700 T |
|---|---|
| Tie bar spacing (H) | 940 mm |
| Shot volume | 1860 cm³ |
| Pressure on material | 1580 bar |
| Robot interface | 67 |
| Number of heating zones | 6 |
| Mould size | 400 |
| Screw diameter | 80 mm |
|---|---|
| Tie bar spacing (V) | 960 mm |
| Shot weight | 1692 g |
| Equipped with robot | Yes |
| Number of cores | 4 |
| Opening of the press | 970 mm |
| Clamping force | 120 T |
|---|---|
| Mould size |
| Robot interface |
|---|
Spain
2000
| Clamping force | 80 T |
|---|---|
| Tie bar spacing (H) | 270 mm |
| Shot volume | 124 cm³ |
| Platen length | 310 mm |
| Bi-metal screw | No |
| Robot interface | |
| Mould size |
| Screw diameter | 26 mm |
|---|---|
| Tie bar spacing (V) | 310 mm |
| Shot weight | 103 g |
| Platen width | 310 mm |
| Equipped with robot | No |
| Opening of the press | 310 mm |
Poland
2012
| Clamping force | 110 T |
|---|---|
| Shot weight | 200 g |
| Mould size |
| Screw diameter | 38 mm |
|---|---|
| Robot interface |
| Clamping force | 120 T |
|---|---|
| Tie bar spacing (V) | 410 mm |
| Shot weight | 195 g |
| Opening of the press | 350 mm |
| Tie bar spacing (H) | 410 mm |
|---|---|
| Shot volume | 7300 cm³ |
| Robot interface | |
| Mould size |
| Clamping force | 465 T |
|---|---|
| Bi-metal screw | Yes |
| Robot interface | EUROMAP 62 |
| Mould size |
| Shot volume | 1239 cm³ |
|---|---|
| Equipped with robot | No |
| Number of cores | 2 |
Poland
2019
| Clamping force | 650 T |
|---|---|
| Robot interface |
| Screw diameter | 85 mm |
|---|---|
| Mould size |
France
2008
| Clamping force | 13 T |
|---|---|
| Tie bar spacing (H) | 680 mm |
| Shot volume | 929 cm³ |
| Pressure on material | 1820 bar |
| Mould size |
| Screw diameter | 65 mm |
|---|---|
| Tie bar spacing (V) | 680 mm |
| Shot weight | 845 g |
| Robot interface |
Poland
2019
| Robot interface |
|---|
| Mould size |
|---|
Инжектор HAITIAN JUPITER 550 III
Vstřikovací lis HAITIAN JUPITER 550 III
Inyectora HAITIAN JUPITER 550 III
Spritzgießmaschine HAITIAN JUPITER 550 III
Μηχανή έγχυσης HAITIAN JUPITER 550 III
Inyectora HAITIAN JUPITER 550 III
Inyectora HAITIAN JUPITER 550 III
Machine à injecter HAITIAN JUPITER 550 III
Inyectora HAITIAN JUPITER 550 III
HAITIAN JUPITER 550 III injektáló gép
Inyectora HAITIAN JUPITER 550 III
Inyectora HAITIAN JUPITER 550 III
Spuitmachine HAITIAN JUPITER 550 III
Wtryskarka HAITIAN JUPITER 550 III
Injetora HAITIAN JUPITER 550 III
Mașină de injectat HAITIAN JUPITER 550 III
Инжектор HAITIAN JUPITER 550 III
Injektora HAITIJAN JUPITER 550 III
Injektor HAITIAN JUPITER 550 III
HAITIAN JUPITER 550 III Enjeksiyon Makinesi
Romania
Italy
Malaysia
Turkey
Greece
EN
- Languages
English (GB)