Contact us to receive an offer.
| Manufacturer | Haas |
|---|---|
| Model | VF -4 S |
| Year | 2007 |
| Location | Italy
|
This listing features a Haas VF-4 S vertical machining center, manufactured in 2007. The machine offers a substantial working area with a longitudinal X-axis travel of 1270 mm, a transversal Y-axis travel of 508 mm, and a vertical Z-axis travel of 635 mm. The spindle nose-to-table distance ranges from 102 mm to 737 mm, allowing for versatile machining capabilities.
The machine's table measures 1321 mm in length and 457 mm in width, equipped with T-slots that are 16 mm wide and spaced 80 mm apart. It supports a maximum part weight of 1588 kg, suitable for handling heavy workpieces. Inside the machining area, the worktable is fitted with two vises mounted on the T-slotted surface, enhancing workpiece stability during operations.
The spindle features a BT 40 taper and can reach speeds up to 12,000 rpm. It is driven by an inline direct drive spindle system, contributing to precision and reliability. The tool magazine has a capacity of 24 pockets, accommodating BT 40 tool tapers, and supports a high-speed tool changer to optimize machining efficiency.
Additional equipment includes a high-pressure through-spindle coolant system and a remote electronic handwheel for precise manual control. The control panel is mounted on the right side of the machine and includes a screen, buttons, an emergency stop, power buttons, and a jog handle. While the control panel shows some smudges and signs of wear, it appears functional.
The machine is externally clean and well-maintained, with the interior showing minor residue and wear marks consistent with typical use. The electrical cabinet is open in the images, revealing orderly and intact internal components, including a 40 HP vector drive and other control electronics, with no visible damage.
Overall, this Haas VF-4 S vertical machining center combines robust construction, a sizeable working envelope, and practical features suitable for various machining applications.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
WORKING AREA:
Longitudinal X: mm 1,270
Transversal Y: mm 508
Vertical Z: mm 635
Spindle nose-to-table distance: mm 102-737
TABLE:
Dimensions: mm 1,321 x 457
Maximum weight on the table: kg 1,588
T-slot width: mm 16
T-slot center distance: mm 80
SPINDLE:
Spindle taper: BT 40
Rotational speed: rpm 12,000
TOOL CHANGE:
Magazine capacity: 24
Tool taper: BT 40
Machine complete with:
High pressure through spindle
Remoted electronic handwheel
Year of construction: 2007
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2017 |
| Offers online | 68 |
| Last activity | Nov. 14, 2026 |
WORKING AREA:
Longitudinal X: mm 1,270
Transversal Y: mm 508
Vertical Z: mm 635
Spindle nose-to-table distance: mm 102-737
TABLE:
Dimensions: mm 1,321 x 457
Maximum weight on the table: kg 1,588
T-slot width: mm 16
T-slot center distance: mm 80
SPINDLE:
Spindle taper: BT 40
Rotational speed: rpm 12,000
TOOL CHANGE:
Magazine capacity: 24
Tool taper: BT 40
Machine complete with:
High pressure through spindle
Remoted electronic handwheel
Year of construction: 2007
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
This listing features a Haas VF-4 S vertical machining center, manufactured in 2007. The machine offers a substantial working area with a longitudinal X-axis travel of 1270 mm, a transversal Y-axis travel of 508 mm, and a vertical Z-axis travel of 635 mm. The spindle nose-to-table distance ranges from 102 mm to 737 mm, allowing for versatile machining capabilities.
The machine's table measures 1321 mm in length and 457 mm in width, equipped with T-slots that are 16 mm wide and spaced 80 mm apart. It supports a maximum part weight of 1588 kg, suitable for handling heavy workpieces. Inside the machining area, the worktable is fitted with two vises mounted on the T-slotted surface, enhancing workpiece stability during operations.
The spindle features a BT 40 taper and can reach speeds up to 12,000 rpm. It is driven by an inline direct drive spindle system, contributing to precision and reliability. The tool magazine has a capacity of 24 pockets, accommodating BT 40 tool tapers, and supports a high-speed tool changer to optimize machining efficiency.
Additional equipment includes a high-pressure through-spindle coolant system and a remote electronic handwheel for precise manual control. The control panel is mounted on the right side of the machine and includes a screen, buttons, an emergency stop, power buttons, and a jog handle. While the control panel shows some smudges and signs of wear, it appears functional.
The machine is externally clean and well-maintained, with the interior showing minor residue and wear marks consistent with typical use. The electrical cabinet is open in the images, revealing orderly and intact internal components, including a 40 HP vector drive and other control electronics, with no visible damage.
Overall, this Haas VF-4 S vertical machining center combines robust construction, a sizeable working envelope, and practical features suitable for various machining applications.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2017 |
| Offers online | 68 |
| Last activity | Nov. 14, 2026 |
Вертикален обработващ център Haas VF -4 S
Vertikální obráběcí centrum Haas VF -4 S
Haas VF -4 S Lodret bearbejdningscenter
Haas VF -4 S Vertikales Bearbeitungszentrum
Κάθετο κέντρο κατεργασίας Haas VF -4 S
Haas VF -4 S Vertical machining center
Centro de mecanizado vertical Haas VF -4 S
Centre d'usinage vertical Haas VF -4 S
Vertikalni obradni centar Haas VF -4 S
Haas VF -4 S Függőleges megmunkáló központ
Centro di lavoro verticale Haas VF -4 S
Vertikalus apdirbimo centras Haas VF -4 S
Haas VF -4 S Verticaal bewerkingscentrum
Pionowe centrum obróbcze Haas VF -4 S
Centro de maquinação vertical Haas VF -4 S
Centru de prelucrare vertical Haas VF -4 S
Haas VF -4 S Вертикальный обрабатывающий центр
Vertikalni obradni centar Haas VF -4 S
Haas VF -4 S Vertikalt bearbetningscenter
Dikey işleme merkezi Haas VF -4 S
EN
- Languages
English (GB)