Contact us to receive an offer.
| Manufacturer | Haas |
|---|---|
| Model | VF-2SS |
| Year | 2019 |
| Location | United Kingdom
|
This listing is for a Haas VF-2SS vertical machining center, manufactured in 2019. The machine measures 3099 mm in length, 2261 mm in width, and 2743 mm in height, with a total weight of 3629 kg. It features a working envelope with traverses of 762 mm (X-axis), 405 mm (Y-axis), and 510 mm (Z-axis), and a table size of 915 mm by 355 mm. The machine can accommodate a maximum workpiece weight of 680 kg and has a spindle speed up to 12,000 rpm.
The spindle motor power is rated at 40 Hp, and it uses a BT40 spindle taper. Rapid feedrates reach up to 35.6 meters per minute. The tool changer has a capacity of 24 stations with a chip-to-chip tool change time of approximately 2.2 seconds.
The machining center includes an enclosed machining area with dual sliding doors for safety and accessibility. Inside the enclosure, the spindle and machine table are visible, equipped with a vise and fixture for securing workpieces. A probing device is mounted on the machine table and the enclosure wall, which can assist in precision measurements.
The control panel is a Haas unit with a screen displaying the active program and machine status, accompanied by an emergency stop button and a handle jog dial. The control panel appears to be in good condition. The machine shows signs of use, including some residual coolant inside the enclosure, indicating it has been operational but maintained.
The machine’s nameplate indicates a serial number of 1167327, manufactured in September 2019. It operates on 440 volts, 3-phase power with a frequency of 50/60 Hz. The enclosure is a NEMA Type 2, designed for indoor use with overcurrent protection.
Overall, this Haas VF-2SS vertical machining center is a robust and precise machine suitable for various machining tasks, offering good workspace dimensions, high spindle speed, and efficient tool changing capabilities.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Control
HAAS
Machine Dimensions
3099 x 2261 x 2743mm
Machine Weight
3629KG
Maximum workpiece weight
680kg
Min - Max Height under Spindle
102 - 610mm
Rapid Feedrates
35.6m/minute
Spindle Motor Power
40Hp
Spindle Speed
12000rpm
Spindle Taper
BT40
Table Size
915 x 355mm
Tool Change Capacity
24 Station
Tool Change Time (Chip to Chip)
2.2 seconds
Traverses XYZ
762 x 405 x 510mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2009 |
| Offers online | 218 |
| Last activity | Nov. 6, 2026 |
Control
HAAS
Machine Dimensions
3099 x 2261 x 2743mm
Machine Weight
3629KG
Maximum workpiece weight
680kg
Min - Max Height under Spindle
102 - 610mm
Rapid Feedrates
35.6m/minute
Spindle Motor Power
40Hp
Spindle Speed
12000rpm
Spindle Taper
BT40
Table Size
915 x 355mm
Tool Change Capacity
24 Station
Tool Change Time (Chip to Chip)
2.2 seconds
Traverses XYZ
762 x 405 x 510mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
This listing is for a Haas VF-2SS vertical machining center, manufactured in 2019. The machine measures 3099 mm in length, 2261 mm in width, and 2743 mm in height, with a total weight of 3629 kg. It features a working envelope with traverses of 762 mm (X-axis), 405 mm (Y-axis), and 510 mm (Z-axis), and a table size of 915 mm by 355 mm. The machine can accommodate a maximum workpiece weight of 680 kg and has a spindle speed up to 12,000 rpm.
The spindle motor power is rated at 40 Hp, and it uses a BT40 spindle taper. Rapid feedrates reach up to 35.6 meters per minute. The tool changer has a capacity of 24 stations with a chip-to-chip tool change time of approximately 2.2 seconds.
The machining center includes an enclosed machining area with dual sliding doors for safety and accessibility. Inside the enclosure, the spindle and machine table are visible, equipped with a vise and fixture for securing workpieces. A probing device is mounted on the machine table and the enclosure wall, which can assist in precision measurements.
The control panel is a Haas unit with a screen displaying the active program and machine status, accompanied by an emergency stop button and a handle jog dial. The control panel appears to be in good condition. The machine shows signs of use, including some residual coolant inside the enclosure, indicating it has been operational but maintained.
The machine’s nameplate indicates a serial number of 1167327, manufactured in September 2019. It operates on 440 volts, 3-phase power with a frequency of 50/60 Hz. The enclosure is a NEMA Type 2, designed for indoor use with overcurrent protection.
Overall, this Haas VF-2SS vertical machining center is a robust and precise machine suitable for various machining tasks, offering good workspace dimensions, high spindle speed, and efficient tool changing capabilities.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2009 |
| Offers online | 218 |
| Last activity | Nov. 6, 2026 |
Вертикален обработващ център Haas VF-2SS
Vertikální obráběcí centrum Haas VF-2SS
Haas VF-2SS Lodret bearbejdningscenter
Haas VF-2SS Vertikales Bearbeitungszentrum
Κάθετο κέντρο κατεργασίας Haas VF-2SS
Haas VF-2SS Vertical machining center
Centro de mecanizado vertical Haas VF-2SS
Centre d'usinage vertical Haas VF-2SS
Vertikalni obradni centar Haas VF-2SS
Haas VF-2SS Függőleges megmunkáló központ
Centro di lavoro verticale Haas VF-2SS
Vertikalus apdirbimo centras Haas VF-2SS
Haas VF-2SS Verticaal bewerkingscentrum
Pionowe centrum obróbcze Haas VF-2SS
Centro de maquinação vertical Haas VF-2SS
Centru de prelucrare vertical Haas VF-2SS
Haas VF-2SS Вертикальный обрабатывающий центр
Vertikalni obradni centar Haas VF-2SS
Haas VF-2SS Vertikalt bearbetningscenter
Dikey işleme merkezi Haas VF-2SS
EN
- Languages
English (GB)